339 lines
9.9 KiB
Makefile
339 lines
9.9 KiB
Makefile
# ----------------------------------------------------------------------------
|
|
# Makefile to compile and link the UART library and test program
|
|
# Author: Peter Fleury
|
|
# File: $Id: Makefile.uart,v 1.7 2015/09/05 19:04:44 peter Exp $
|
|
#
|
|
# Adjust MCU and F_CPU below to your AVR target
|
|
#
|
|
# Adjust the size of the receive and transmit ringbuffer in bytes using the
|
|
# defines -DUART_RX_BUFFER_SIZE=<size in bytes> and -DUART_TX_BUFFER_SIZE=<size in bytes>
|
|
# in the CDEFS section below
|
|
#----------------------------------------------------------------------------
|
|
# usage:
|
|
#
|
|
# make = build software
|
|
# make clean = Clean out built project files
|
|
# make program = Download the hex file to the device, using avrdude.
|
|
# Please customize the avrdude settings below first!
|
|
#
|
|
# make filename.s = Just compile filename.c into the assembler code only.
|
|
# make filename.i = Create a preprocessed source file
|
|
#
|
|
# To rebuild project do "make clean" then "make"
|
|
#----------------------------------------------------------------------------
|
|
|
|
|
|
# MCU name
|
|
MCU = atmega8
|
|
|
|
|
|
# Processor frequency.
|
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
# processor frequency. You can then use this symbol in your source code to
|
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
# automatically to create a 32-bit value in your source code.
|
|
F_CPU = 7372800
|
|
|
|
|
|
|
|
# Target file name (without extension).
|
|
TARGET = test_uart
|
|
|
|
|
|
# List C source files here. (C dependencies are automatically generated.)
|
|
SRC = $(TARGET).c uart.c
|
|
|
|
|
|
# List Assembler source files here.
|
|
# Make them always end in a capital .S. Files ending in a lowercase .s
|
|
# will not be considered source files but generated files (assembler
|
|
# output from the compiler), and will be deleted upon "make clean"!
|
|
# Even though the DOS/Win* filesystem matches both .s and .S the same,
|
|
# it will preserve the spelling of the filenames, and gcc itself does
|
|
# care about how the name is spelled on its command-line.
|
|
#ASRC =
|
|
|
|
|
|
# List any extra directories to look for include files here.
|
|
# Each directory must be seperated by a space.
|
|
# Use forward slashes for directory separators.
|
|
# For a directory that has spaces, enclose it in quotes.
|
|
EXTRAINCDIRS =
|
|
|
|
|
|
#specify alternate location of sources files
|
|
# (unlike VPATH= which is a search path for all prerequisites, not just source files)
|
|
#vpath %.c /<directory>/
|
|
#vpath %.S /<directory>/
|
|
|
|
|
|
# Optimization level, can be [0, 1, 2, 3, s].
|
|
# 0 = turn off optimization. s = optimize for size.
|
|
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
|
OPT = s
|
|
|
|
|
|
# Place -D or -U options here
|
|
# uncomment and adapt these line if you want different UART library buffer size
|
|
#CDEFS += -DUART_RX_BUFFER_SIZE=128
|
|
#CDEFS += -DUART_TX_BUFFER_SIZE=128
|
|
|
|
|
|
|
|
# Place -I options here
|
|
CINCS =
|
|
|
|
|
|
#---------------- Compiler Options ----------------
|
|
# -gdwarf-2: generate debugging information
|
|
# -O*: optimization level
|
|
# -f...: tuning, see GCC manual and avr-libc documentation
|
|
# -Wall...: warning level
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -adhlns...: create assembler listing
|
|
CFLAGS = -DF_CPU=$(F_CPU)UL
|
|
CFLAGS += $(CDEFS) $(CINCS)
|
|
CFLAGS += -I. $(patsubst %,-I%,$(EXTRAINCDIRS))
|
|
CFLAGS += -std=gnu99
|
|
CFLAGS += -gdwarf-2
|
|
CFLAGS += -O$(OPT)
|
|
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
|
|
CFLAGS += -Wall -Wstrict-prototypes
|
|
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
|
|
CFLAGS += -save-temps
|
|
|
|
|
|
#---------------- Assembler Options ----------------
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -adhlns=$(<:.S=.lst) create listing
|
|
# -gdwarf-2: generate debugging information
|
|
ASFLAGS = -DF_CPU=$(F_CPU)UL -x assembler-with-cpp -Wa,-gdwarf2
|
|
|
|
#---------------- Library Options ----------------
|
|
# Minimalistic printf version
|
|
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
|
|
|
|
# Floating point printf version (requires MATH_LIB = -lm below)
|
|
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
|
|
|
|
# If this is left blank, then it will use the Standard printf version.
|
|
PRINTF_LIB =
|
|
#PRINTF_LIB = $(PRINTF_LIB_MIN)
|
|
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
|
|
|
|
|
|
# Minimalistic scanf version
|
|
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
|
|
|
|
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
|
|
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
|
|
|
|
# If this is left blank, then it will use the Standard scanf version.
|
|
SCANF_LIB =
|
|
#SCANF_LIB = $(SCANF_LIB_MIN)
|
|
#SCANF_LIB = $(SCANF_LIB_FLOAT)
|
|
|
|
|
|
MATH_LIB = -lm
|
|
|
|
|
|
|
|
#---------------- External Memory Options ----------------
|
|
|
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
|
# used for variables (.data/.bss) and heap (malloc()).
|
|
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
|
|
|
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
|
# only used for heap (malloc()).
|
|
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
|
|
|
|
EXTMEMOPTS =
|
|
|
|
|
|
|
|
#---------------- Linker Options ----------------
|
|
# -Wl,...: tell GCC to pass this to linker.
|
|
# -Map: create map file
|
|
# --cref: add cross reference to map file
|
|
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
|
|
LDFLAGS += $(EXTMEMOPTS)
|
|
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
|
|
|
|
|
|
|
|
#---------------- Programming Options (avrdude) ----------------
|
|
|
|
# Programming hardware: Type: avrdude -c ? to get a full listing.
|
|
AVRDUDE_PROGRAMMER = usbasp
|
|
|
|
# usb, com1 = serial port, lpt1 = parallel port
|
|
AVRDUDE_PORT = USB
|
|
|
|
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
|
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
|
|
|
|
# Uncomment the following if you do /not/ wish a verification to be performed after programming the device.
|
|
#AVRDUDE_NO_VERIFY = -V
|
|
|
|
# Disable save mode for fuses
|
|
AVRDUDE_NO_SAFEMODE = -u
|
|
|
|
# Uncomment the following if you want avrdude's erase cycle counter.
|
|
# Note that this counter needs to be initialized first using -Yn,
|
|
#AVRDUDE_ERASE_COUNTER = -y
|
|
|
|
# Increase verbosity level.
|
|
#AVRDUDE_VERBOSE = -v -v
|
|
|
|
# Adjust programming speed of USBasp
|
|
# no -B switch 375khz (default)
|
|
# -B 2000 500 hz
|
|
# -B 1000 1khz
|
|
# -B 500 2khz
|
|
# -B 250 4khz
|
|
# -B 125 8 khz
|
|
# -B 62 16khz
|
|
# -B 31 32khz * the cutoff for bit banged isp
|
|
# -B 10 93.75 khz
|
|
# -B 5 187.5 khz
|
|
# -B 2 375 khz
|
|
# -B 1 750 khz
|
|
# -B .5 1.5mhz
|
|
#AVRDUDE_SPEED = -B .5
|
|
|
|
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_NO_SAFEMODE)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_SPEED)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
|
|
|
|
|
|
|
|
#============================================================================
|
|
# Output format. (can be srec, ihex, binary)
|
|
FORMAT = ihex
|
|
|
|
# Define programs and commands.
|
|
#SHELL = win-bash
|
|
CC = avr-gcc
|
|
OBJCOPY = avr-objcopy
|
|
OBJDUMP = avr-objdump
|
|
SIZE = avr-size
|
|
NM = avr-nm
|
|
AVRDUDE = avrdude
|
|
REMOVE = rm -rf
|
|
COPY = cp
|
|
WINSHELL = cmd
|
|
|
|
|
|
# Define Messages
|
|
MSG_FLASH = Creating load file for Flash:
|
|
MSG_EEPROM = Creating load file for EEPROM:
|
|
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
|
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
|
MSG_LINKING = Linking:
|
|
MSG_COMPILING = Compiling:
|
|
MSG_ASSEMBLING = Assembling:
|
|
MSG_CLEANING = Cleaning project:
|
|
|
|
|
|
|
|
# Define all object files.
|
|
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
|
|
|
|
# Define all listing files.
|
|
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst)
|
|
|
|
|
|
# Compiler flags to generate dependency files.
|
|
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
|
|
|
|
|
|
# Combine all necessary flags and optional flags.
|
|
# Add target processor to flags.
|
|
ALL_CFLAGS = -mmcu=$(MCU) $(CFLAGS) $(GENDEPFLAGS)
|
|
ALL_ASFLAGS = -mmcu=$(MCU) -I. $(ASFLAGS)
|
|
|
|
|
|
# Default target.
|
|
all: gccversion $(TARGET).elf $(TARGET).hex $(TARGET).eep $(TARGET).lss $(TARGET).sym size
|
|
|
|
|
|
# Display compiler version information.
|
|
gccversion :
|
|
@echo $(OBJ1)
|
|
@$(CC) --version
|
|
|
|
|
|
# Create final output files (.hex, .eep) from ELF output file.
|
|
%.hex: %.elf
|
|
@echo $(MSG_FLASH) $@
|
|
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
|
|
|
|
%.eep: %.elf
|
|
@echo $(MSG_EEPROM) $@
|
|
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
|
|
|
|
# Create extended listing file from ELF output file.
|
|
%.lss: %.elf
|
|
@echo $(MSG_EXTENDED_LISTING) $@
|
|
$(OBJDUMP) -h -S $< > $@
|
|
|
|
# Create a symbol table from ELF output file.
|
|
%.sym: %.elf
|
|
@echo $(MSG_SYMBOL_TABLE) $@
|
|
$(NM) -n $< > $@
|
|
|
|
# Link: create ELF output file from object files.
|
|
.SECONDARY : $(TARGET).elf
|
|
.PRECIOUS : $(OBJ)
|
|
%.elf: $(OBJ)
|
|
@echo $(MSG_LINKING) $@
|
|
$(CC) -mmcu=$(MCU) $(LDFLAGS) $^ --output $(@F)
|
|
|
|
# Compile: create object files from C source files.
|
|
%.o : %.c
|
|
@echo $(MSG_COMPILING) $<
|
|
$(CC) -c $(ALL_CFLAGS) $< -o $(@F)
|
|
|
|
# Compile: create assembler files from C source files.
|
|
%.s : %.c
|
|
$(CC) -S $(ALL_CFLAGS) $< -o $(@F)
|
|
|
|
# Assemble: create object files from assembler source files.
|
|
%.o : %.S
|
|
@echo $(MSG_ASSEMBLING) $<
|
|
$(CC) -c $(ALL_ASFLAGS) $< -o $(@F)
|
|
|
|
# Create preprocessed source for use in sending a bug report.
|
|
%.i : %.c
|
|
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $(@F)
|
|
|
|
|
|
# Display size of file.
|
|
size: ${TARGET}.elf
|
|
@avr-size -C --mcu=${MCU} ${TARGET}.elf
|
|
|
|
|
|
# Program the device.
|
|
program: $(TARGET).hex $(TARGET).eep
|
|
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
|
|
|
|
|
# Delete all generated files.
|
|
clean:
|
|
@echo $(MSG_CLEANING)
|
|
$(REMOVE) $(TARGET).hex $(TARGET).eep $(TARGET).cof $(TARGET).elf $(TARGET).map $(TARGET).sym $(TARGET).lss $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(SRC:.c=.i) .dep/
|
|
|
|
|
|
# Include the dependency files.
|
|
#-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
|
|
-include $(shell mkdir .dep 2>NUL) $(wildcard .dep/*)
|
|
|
|
|
|
# Listing of phony targets.
|
|
.PHONY : all size gccversion clean program
|
|
|