Further information added.

ZL1CVD_information.md

@@ -0,0 +1,35 @@
+
+The following text was copied from the eBay.co.uk article website.
+I am not the author of this information - it is only added for further information about ZL1CVD's work:
+
+The TenaTesta is a USB device which you can power from a smart phone, USB power bank or even a PC. A standard micro-USB cable is required (not included). To operate, simply plug it into a USB power source, connect the antenna to be tested, select the beginning and end frequency then double click the start button to start sweeping the selected frequency range. The small 1.8” color display then graphs forward power (blue), reverse power (red) and approximate SWR (yellow). At the end of the sweep, it then indicates the 1st frequency that gave the best SWR for the sweep (1st frequency with closest match to 50 ohms). For antenna's where several frequencies are close to 50 ohms, only the 1st is indicated. You can of coarse narrow things down by reducing the gap between start and stop frequencies.
+
+How it works
+------------
+
+At the heart of the TenaTesta is an Arduino Nano compatible microcontroller which controls a Silicone Labs CMOS PLL clock generator that is feed into a Wheatstone impedance bridge. The microcontroller measures both forward and reverse power, calculates SWR and plots the results as a graph on a 1.8” TFT color display.
+Limitations
+
+This is a cost effective approach that works well for me. However its not perfect and there are several limitations to this design:
+
+PLL clock output is a square wave
+---------------------------------
+
+This means the signal generated is full of harmonics which could result in a false SWR readings. To help overcome this issue, the clock output is kept to a bare minimum and multiple power readings are averaged before SWR is calculated. In practice I have not found harmonic related issues. It is likely that sweeping a massive range may give false readings but doing so is somewhat pointless due to the resolution of the display.
+
+Wheatstone impedance bridge
+---------------------------
+The Wheatstone impedance bridge checks resistance and not the complex impedance's that can exist in some antenna designs. Ideally a Bruene directional coupler would be used but I felt this would take up too much board space, not have the bandwidth and be harder to replicate. I am pleased with the results of the Wheatstone bridge with my wire type HF antennas. I personally find this compact tool ideal for quick antenna measurements. For tricky antennas, I use a bench analyzer.
+
+Arduino program
+---------------
+I am not a professional programmer and as such the code could possibly be improved. It does however do what I want and the source code is available to those who purchase the TenaTesta (assembled, PCB or kit) at no additional charge for private non-commercial use.
+
+Upgradeable & a great Arduino learning platform
+-----------------------------------------------
+The TenaTesta makes a great Microcontroller learning platform. By installing the Arduino programming environment onto you PC, Mac or Linux box, you will be able to examine and modify my code. You'll be able to make changes, compile and upload via USB.
+
+3.3v / 5v Warning
+-----------------
+The PLL chip used in this design is rated for 3.3v operation only. The board design does not cater for a microcontroller operating at a different voltage to the PLL. In theory, a 3.3v PLL connected to a 5v microcontroller should destroy the PLL. In practice, all units I have assembled to date have worked fine. It is your choice to assemble this with either 3.3V or 5V Arduino Nano 32u4 microcontroller. But be aware the 3.3v 32u4 Nano operates at a much slower clock frequency - the display will be slower to change and update, keys will be slower to respond. 
+

pcb/TenaTesta_ZL1CVD.sch

@@ -28,6 +28,7 @@ LIBS:opto
 LIBS:atmel
 LIBS:contrib
 LIBS:valves
+LIBS:TenaTesta_ZL1CVD-cache
 EELAYER 25 0
 EELAYER END
 $Descr A4 11693 8268
@@ -43,10 +44,10 @@ Comment3 ""
 Comment4 ""
 $EndDescr
 $Comp
-L R R?
+L R R7
 U 1 1 57D81418
 P 3500 2050
-F 0 "R?" V 3580 2050 50  0000 C CNN
+F 0 "R7" V 3580 2050 50  0000 C CNN
 F 1 "50" V 3500 2050 50  0000 C CNN
 F 2 "" V 3430 2050 50  0000 C CNN
 F 3 "" H 3500 2050 50  0000 C CNN
@@ -54,10 +55,10 @@ F 3 "" H 3500 2050 50  0000 C CNN
 	0    1    1    0   
 $EndComp
 $Comp
-L R R?
+L R R9
 U 1 1 57D814B0
 P 4100 2450
-F 0 "R?" V 4180 2450 50  0000 C CNN
+F 0 "R9" V 4180 2450 50  0000 C CNN
 F 1 "50" V 4100 2450 50  0000 C CNN
 F 2 "" V 4030 2450 50  0000 C CNN
 F 3 "" H 4100 2450 50  0000 C CNN
@@ -65,10 +66,10 @@ F 3 "" H 4100 2450 50  0000 C CNN
 	-1   0    0    1   
 $EndComp
 $Comp
-L R R?
+L R R10
 U 1 1 57D814EE
 P 4100 3250
-F 0 "R?" V 4180 3250 50  0000 C CNN
+F 0 "R10" V 4180 3250 50  0000 C CNN
 F 1 "50" V 4100 3250 50  0000 C CNN
 F 2 "" V 4030 3250 50  0000 C CNN
 F 3 "" H 4100 3250 50  0000 C CNN
@@ -76,10 +77,10 @@ F 3 "" H 4100 3250 50  0000 C CNN
 	-1   0    0    1   
 $EndComp
 $Comp
-L R R?
+L R R4
 U 1 1 57D8156D
 P 2850 3250
-F 0 "R?" V 2930 3250 50  0000 C CNN
+F 0 "R4" V 2930 3250 50  0000 C CNN
 F 1 "10k" V 2850 3250 50  0000 C CNN
 F 2 "" V 2780 3250 50  0000 C CNN
 F 3 "" H 2850 3250 50  0000 C CNN
@@ -87,10 +88,10 @@ F 3 "" H 2850 3250 50  0000 C CNN
 	-1   0    0    1   
 $EndComp
 $Comp
-L R R?
+L R R11
 U 1 1 57D815CB
 P 5000 3250
-F 0 "R?" V 5080 3250 50  0000 C CNN
+F 0 "R11" V 5080 3250 50  0000 C CNN
 F 1 "10k" V 5000 3250 50  0000 C CNN
 F 2 "" V 4930 3250 50  0000 C CNN
 F 3 "" H 5000 3250 50  0000 C CNN
@@ -98,10 +99,10 @@ F 3 "" H 5000 3250 50  0000 C CNN
 	-1   0    0    1   
 $EndComp
 $Comp
-L R R?
+L R R3
 U 1 1 57D81651
 P 2500 4000
-F 0 "R?" V 2580 4000 50  0000 C CNN
+F 0 "R3" V 2580 4000 50  0000 C CNN
 F 1 "100k" V 2500 4000 50  0000 C CNN
 F 2 "" V 2430 4000 50  0000 C CNN
 F 3 "" H 2500 4000 50  0000 C CNN
@@ -109,10 +110,10 @@ F 3 "" H 2500 4000 50  0000 C CNN
 	0    1    1    0   
 $EndComp
 $Comp
-L R R?
+L R R8
 U 1 1 57D81777
 P 3750 4000
-F 0 "R?" V 3830 4000 50  0000 C CNN
+F 0 "R8" V 3830 4000 50  0000 C CNN
 F 1 "100k" V 3750 4000 50  0000 C CNN
 F 2 "" V 3680 4000 50  0000 C CNN
 F 3 "" H 3750 4000 50  0000 C CNN
@@ -120,10 +121,10 @@ F 3 "" H 3750 4000 50  0000 C CNN
 	0    1    1    0   
 $EndComp
 $Comp
-L R R?
+L R R1
 U 1 1 57D817F0
 P 2150 4500
-F 0 "R?" V 2230 4500 50  0000 C CNN
+F 0 "R1" V 2230 4500 50  0000 C CNN
 F 1 "680" V 2150 4500 50  0000 C CNN
 F 2 "" V 2080 4500 50  0000 C CNN
 F 3 "" H 2150 4500 50  0000 C CNN
@@ -131,10 +132,10 @@ F 3 "" H 2150 4500 50  0000 C CNN
 	-1   0    0    1   
 $EndComp
 $Comp
-L R R?
+L R R5
 U 1 1 57D81862
 P 3400 4500
-F 0 "R?" V 3480 4500 50  0000 C CNN
+F 0 "R5" V 3480 4500 50  0000 C CNN
 F 1 "680" V 3400 4500 50  0000 C CNN
 F 2 "" V 3330 4500 50  0000 C CNN
 F 3 "" H 3400 4500 50  0000 C CNN
@@ -142,10 +143,10 @@ F 3 "" H 3400 4500 50  0000 C CNN
 	-1   0    0    1   
 $EndComp
 $Comp
-L R R?
+L R R6
 U 1 1 57D818FD
 P 3400 5300
-F 0 "R?" V 3480 5300 50  0000 C CNN
+F 0 "R6" V 3480 5300 50  0000 C CNN
 F 1 "6k8" V 3400 5300 50  0000 C CNN
 F 2 "" V 3330 5300 50  0000 C CNN
 F 3 "" H 3400 5300 50  0000 C CNN
@@ -153,10 +154,10 @@ F 3 "" H 3400 5300 50  0000 C CNN
 	-1   0    0    1   
 $EndComp
 $Comp
-L R R?
+L R R2
 U 1 1 57D8194B
 P 2150 5300
-F 0 "R?" V 2230 5300 50  0000 C CNN
+F 0 "R2" V 2230 5300 50  0000 C CNN
 F 1 "6k8" V 2150 5300 50  0000 C CNN
 F 2 "" V 2080 5300 50  0000 C CNN
 F 3 "" H 2150 5300 50  0000 C CNN
@@ -164,10 +165,10 @@ F 3 "" H 2150 5300 50  0000 C CNN
 	-1   0    0    1   
 $EndComp
 $Comp
-L CONN_01X02 P?
+L CONN_01X02 P2
 U 1 1 57D819D9
 P 2850 6350
-F 0 "P?" H 2850 6500 50  0000 C CNN
+F 0 "P2" H 2850 6500 50  0000 C CNN
 F 1 "CONN_01X02" V 2950 6350 50  0000 C CNN
 F 2 "" H 2850 6350 50  0000 C CNN
 F 3 "" H 2850 6350 50  0000 C CNN
@@ -175,10 +176,10 @@ F 3 "" H 2850 6350 50  0000 C CNN
 	0    1    1    0   
 $EndComp
 $Comp
-L C C?
+L C C4
 U 1 1 57D81AA8
 P 5100 2050
-F 0 "C?" H 5125 2150 50  0000 L CNN
+F 0 "C4" H 5125 2150 50  0000 L CNN
 F 1 "100n" H 5125 1950 50  0000 L CNN
 F 2 "" H 5138 1900 50  0000 C CNN
 F 3 "" H 5100 2050 50  0000 C CNN
@@ -186,10 +187,10 @@ F 3 "" H 5100 2050 50  0000 C CNN
 	0    1    1    0   
 $EndComp
 $Comp
-L C C?
+L C C2
 U 1 1 57D81D90
 P 2850 2450
-F 0 "C?" H 2875 2550 50  0000 L CNN
+F 0 "C2" H 2875 2550 50  0000 L CNN
 F 1 "100n" H 2875 2350 50  0000 L CNN
 F 2 "" H 2888 2300 50  0000 C CNN
 F 3 "" H 2850 2450 50  0000 C CNN
@@ -197,10 +198,10 @@ F 3 "" H 2850 2450 50  0000 C CNN
 	-1   0    0    1   
 $EndComp
 $Comp
-L D D?
+L D D1
 U 1 1 57D81E7A
 P 3500 2800
-F 0 "D?" H 3500 2900 50  0000 C CNN
+F 0 "D1" H 3500 2900 50  0000 C CNN
 F 1 "1N60" H 3500 2700 50  0000 C CNN
 F 2 "" H 3500 2800 50  0000 C CNN
 F 3 "" H 3500 2800 50  0000 C CNN
@@ -208,10 +209,10 @@ F 3 "" H 3500 2800 50  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L D D?
+L D D2
 U 1 1 57D81FC0
 P 4550 2800
-F 0 "D?" H 4550 2900 50  0000 C CNN
+F 0 "D2" H 4550 2900 50  0000 C CNN
 F 1 "1N60" H 4550 2700 50  0000 C CNN
 F 2 "" H 4550 2800 50  0000 C CNN
 F 3 "" H 4550 2800 50  0000 C CNN
@@ -219,10 +220,10 @@ F 3 "" H 4550 2800 50  0000 C CNN
 	-1   0    0    -1  
 $EndComp
 $Comp
-L C C?
+L C C5
 U 1 1 57D82040
 P 5550 3250
-F 0 "C?" H 5575 3350 50  0000 L CNN
+F 0 "C5" H 5575 3350 50  0000 L CNN
 F 1 "100n" H 5575 3150 50  0000 L CNN
 F 2 "" H 5588 3100 50  0000 C CNN
 F 3 "" H 5550 3250 50  0000 C CNN
@@ -230,10 +231,10 @@ F 3 "" H 5550 3250 50  0000 C CNN
 	-1   0    0    1   
 $EndComp
 $Comp
-L C C?
+L C C1
 U 1 1 57D8211D
 P 2500 3750
-F 0 "C?" H 2525 3850 50  0000 L CNN
+F 0 "C1" H 2525 3850 50  0000 L CNN
 F 1 "10n" H 2525 3650 50  0000 L CNN
 F 2 "" H 2538 3600 50  0000 C CNN
 F 3 "" H 2500 3750 50  0000 C CNN
@@ -241,10 +242,10 @@ F 3 "" H 2500 3750 50  0000 C CNN
 	0    -1   -1   0   
 $EndComp
 $Comp
-L C C?
+L C C3
 U 1 1 57D821F7
 P 3750 3750
-F 0 "C?" H 3775 3850 50  0000 L CNN
+F 0 "C3" H 3775 3850 50  0000 L CNN
 F 1 "10n" H 3775 3650 50  0000 L CNN
 F 2 "" H 3788 3600 50  0000 C CNN
 F 3 "" H 3750 3750 50  0000 C CNN
@@ -252,10 +253,10 @@ F 3 "" H 3750 3750 50  0000 C CNN
 	0    -1   -1   0   
 $EndComp
 $Comp
-L BNC P?
+L BNC P1
 U 1 1 57D82265
 P 2250 2050
-F 0 "P?" H 2260 2170 50  0000 C CNN
+F 0 "P1" H 2260 2170 50  0000 C CNN
 F 1 "BNC" V 2360 1990 50  0000 C CNN
 F 2 "" H 2250 2050 50  0000 C CNN
 F 3 "" H 2250 2050 50  0000 C CNN
@@ -265,10 +266,10 @@ $EndComp
 Wire Wire Line
 	2400 2050 3350 2050
 $Comp
-L GND #PWR?
+L GND #PWR2
 U 1 1 57D82504
 P 2250 2350
-F 0 "#PWR?" H 2250 2100 50  0001 C CNN
+F 0 "#PWR2" H 2250 2100 50  0001 C CNN
 F 1 "GND" H 2250 2200 50  0000 C CNN
 F 2 "" H 2250 2350 50  0000 C CNN
 F 3 "" H 2250 2350 50  0000 C CNN
@@ -334,10 +335,10 @@ Connection ~ 5000 2800
 Wire Wire Line
 	5000 3750 5000 3400
 $Comp
-L GND #PWR?
+L GND #PWR7
 U 1 1 57D83353
 P 4100 3500
-F 0 "#PWR?" H 4100 3250 50  0001 C CNN
+F 0 "#PWR7" H 4100 3250 50  0001 C CNN
 F 1 "GND" H 4100 3350 50  0000 C CNN
 F 2 "" H 4100 3500 50  0000 C CNN
 F 3 "" H 4100 3500 50  0000 C CNN
@@ -345,10 +346,10 @@ F 3 "" H 4100 3500 50  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L GND #PWR?
+L GND #PWR9
 U 1 1 57D833E2
 P 5550 3500
-F 0 "#PWR?" H 5550 3250 50  0001 C CNN
+F 0 "#PWR9" H 5550 3250 50  0001 C CNN
 F 1 "GND" H 5550 3350 50  0000 C CNN
 F 2 "" H 5550 3500 50  0000 C CNN
 F 3 "" H 5550 3500 50  0000 C CNN
@@ -370,10 +371,10 @@ Wire Wire Line
 	3400 4750 3900 4750
 Connection ~ 3400 4750
 $Comp
-L GND #PWR?
+L GND #PWR3
 U 1 1 57D83F2B
 P 2350 5150
-F 0 "#PWR?" H 2350 4900 50  0001 C CNN
+F 0 "#PWR3" H 2350 4900 50  0001 C CNN
 F 1 "GND" H 2350 5000 50  0000 C CNN
 F 2 "" H 2350 5150 50  0000 C CNN
 F 3 "" H 2350 5150 50  0000 C CNN
@@ -381,10 +382,10 @@ F 3 "" H 2350 5150 50  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L GND #PWR?
+L GND #PWR6
 U 1 1 57D84180
 P 3600 5150
-F 0 "#PWR?" H 3600 4900 50  0001 C CNN
+F 0 "#PWR6" H 3600 4900 50  0001 C CNN
 F 1 "GND" H 3600 5000 50  0000 C CNN
 F 2 "" H 3600 5150 50  0000 C CNN
 F 3 "" H 3600 5150 50  0000 C CNN
@@ -409,10 +410,10 @@ Wire Wire Line
 	2750 5450 2750 5550
 Connection ~ 2750 5550
 $Comp
-L +5V #PWR?
+L +5V #PWR8
 U 1 1 57D84814
 P 4400 4950
-F 0 "#PWR?" H 4400 4800 50  0001 C CNN
+F 0 "#PWR8" H 4400 4800 50  0001 C CNN
 F 1 "+5V" H 4400 5090 50  0000 C CNN
 F 2 "" H 4400 4950 50  0000 C CNN
 F 3 "" H 4400 4950 50  0000 C CNN
@@ -428,10 +429,10 @@ Wire Wire Line
 Text Label 5650 2050 0    60   ~ 0
 CLK0
 $Comp
-L CONN_01X03 P?
+L CONN_01X03 P6
 U 1 1 57D853A1
 P 10200 1950
-F 0 "P?" H 10200 2150 50  0000 C CNN
+F 0 "P6" H 10200 2150 50  0000 C CNN
 F 1 "CONN_01X03" V 10300 1950 50  0000 C CNN
 F 2 "" H 10200 1950 50  0000 C CNN
 F 3 "" H 10200 1950 50  0000 C CNN
@@ -445,10 +446,10 @@ Wire Wire Line
 Wire Wire Line
 	9900 2050 10000 2050
 $Comp
-L GND #PWR?
+L GND #PWR19
 U 1 1 57D854FE
 P 9900 2150
-F 0 "#PWR?" H 9900 1900 50  0001 C CNN
+F 0 "#PWR19" H 9900 1900 50  0001 C CNN
 F 1 "GND" H 9900 2000 50  0000 C CNN
 F 2 "" H 9900 2150 50  0000 C CNN
 F 3 "" H 9900 2150 50  0000 C CNN
@@ -461,10 +462,10 @@ Wire Wire Line
 Text Label 9650 1950 2    60   ~ 0
 CLK0
 $Comp
-L CONN_01X07 P?
+L CONN_01X07 P4
 U 1 1 57D8571B
 P 8300 2000
-F 0 "P?" H 8300 2400 50  0000 C CNN
+F 0 "P4" H 8300 2400 50  0000 C CNN
 F 1 "CONN_01X07" V 8400 2000 50  0000 C CNN
 F 2 "" H 8300 2000 50  0000 C CNN
 F 3 "" H 8300 2000 50  0000 C CNN
@@ -484,10 +485,10 @@ Wire Wire Line
 Wire Wire Line
 	7800 2300 8100 2300
 $Comp
-L +5V #PWR?
+L +5V #PWR14
 U 1 1 57D85B32
 P 7800 2300
-F 0 "#PWR?" H 7800 2150 50  0001 C CNN
+F 0 "#PWR14" H 7800 2150 50  0001 C CNN
 F 1 "+5V" H 7800 2440 50  0000 C CNN
 F 2 "" H 7800 2300 50  0000 C CNN
 F 3 "" H 7800 2300 50  0000 C CNN
@@ -495,10 +496,10 @@ F 3 "" H 7800 2300 50  0000 C CNN
 	0    -1   -1   0   
 $EndComp
 $Comp
-L GND #PWR?
+L GND #PWR15
 U 1 1 57D85C77
 P 8000 2400
-F 0 "#PWR?" H 8000 2150 50  0001 C CNN
+F 0 "#PWR15" H 8000 2150 50  0001 C CNN
 F 1 "GND" H 8000 2250 50  0000 C CNN
 F 2 "" H 8000 2400 50  0000 C CNN
 F 3 "" H 8000 2400 50  0000 C CNN
@@ -510,10 +511,10 @@ Wire Wire Line
 Wire Wire Line
 	8000 2200 8000 2400
 $Comp
-L C C?
+L C C6
 U 1 1 57D85D32
 P 7350 2050
-F 0 "C?" H 7375 2150 50  0000 L CNN
+F 0 "C6" H 7375 2150 50  0000 L CNN
 F 1 "100n" H 7375 1950 50  0000 L CNN
 F 2 "" H 7388 1900 50  0000 C CNN
 F 3 "" H 7350 2050 50  0000 C CNN
@@ -521,10 +522,10 @@ F 3 "" H 7350 2050 50  0000 C CNN
 	-1   0    0    1   
 $EndComp
 $Comp
-L +5V #PWR?
+L +5V #PWR11
 U 1 1 57D85E0F
 P 7350 1800
-F 0 "#PWR?" H 7350 1650 50  0001 C CNN
+F 0 "#PWR11" H 7350 1650 50  0001 C CNN
 F 1 "+5V" H 7350 1940 50  0000 C CNN
 F 2 "" H 7350 1800 50  0000 C CNN
 F 3 "" H 7350 1800 50  0000 C CNN
@@ -532,10 +533,10 @@ F 3 "" H 7350 1800 50  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L GND #PWR?
+L GND #PWR12
 U 1 1 57D85E65
 P 7350 2300
-F 0 "#PWR?" H 7350 2050 50  0001 C CNN
+F 0 "#PWR12" H 7350 2050 50  0001 C CNN
 F 1 "GND" H 7350 2150 50  0000 C CNN
 F 2 "" H 7350 2300 50  0000 C CNN
 F 3 "" H 7350 2300 50  0000 C CNN
@@ -559,10 +560,10 @@ SDA
 Wire Wire Line
 	7500 4250 7700 4250
 $Comp
-L GND #PWR?
+L GND #PWR13
 U 1 1 57D86AF6
 P 7500 4250
-F 0 "#PWR?" H 7500 4000 50  0001 C CNN
+F 0 "#PWR13" H 7500 4000 50  0001 C CNN
 F 1 "GND" H 7500 4100 50  0000 C CNN
 F 2 "" H 7500 4250 50  0000 C CNN
 F 3 "" H 7500 4250 50  0000 C CNN
@@ -570,10 +571,10 @@ F 3 "" H 7500 4250 50  0000 C CNN
 	0    1    1    0   
 $EndComp
 $Comp
-L +5V #PWR?
+L +5V #PWR17
 U 1 1 57D86BE1
 P 9000 4250
-F 0 "#PWR?" H 9000 4100 50  0001 C CNN
+F 0 "#PWR17" H 9000 4100 50  0001 C CNN
 F 1 "+5V" H 9000 4390 50  0000 C CNN
 F 2 "" H 9000 4250 50  0000 C CNN
 F 3 "" H 9000 4250 50  0000 C CNN
@@ -583,10 +584,10 @@ $EndComp
 Wire Wire Line
 	8800 4250 9000 4250
 $Comp
-L GND #PWR?
+L GND #PWR16
 U 1 1 57D86CAF
 P 9000 4050
-F 0 "#PWR?" H 9000 3800 50  0001 C CNN
+F 0 "#PWR16" H 9000 3800 50  0001 C CNN
 F 1 "GND" H 9000 3900 50  0000 C CNN
 F 2 "" H 9000 4050 50  0000 C CNN
 F 3 "" H 9000 4050 50  0000 C CNN
@@ -614,10 +615,10 @@ A1
 Text Label 9000 5050 0    60   ~ 0
 A0
 $Comp
-L CONN_01X15 P?
+L CONN_01X15 P3
 U 1 1 57D8755C
 P 7900 4650
-F 0 "P?" H 7900 5450 50  0000 C CNN
+F 0 "P3" H 7900 5450 50  0000 C CNN
 F 1 "CONN_01X15" V 8000 4650 50  0000 C CNN
 F 2 "" H 7900 4650 50  0000 C CNN
 F 3 "" H 7900 4650 50  0000 C CNN
@@ -625,10 +626,10 @@ F 3 "" H 7900 4650 50  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L CONN_01X15 P?
+L CONN_01X15 P5
 U 1 1 57D87619
 P 8600 4650
-F 0 "P?" H 8600 5450 50  0000 C CNN
+F 0 "P5" H 8600 5450 50  0000 C CNN
 F 1 "CONN_01X15" V 8700 4650 50  0000 C CNN
 F 2 "" H 8600 4650 50  0000 C CNN
 F 3 "" H 8600 4650 50  0000 C CNN
@@ -644,10 +645,10 @@ SDA
 Text Label 9000 4550 0    60   ~ 0
 SCL
 $Comp
-L C C?
+L C C7
 U 1 1 57D87F1E
 P 9250 5150
-F 0 "C?" H 9275 5250 50  0000 L CNN
+F 0 "C7" H 9275 5250 50  0000 L CNN
 F 1 "100n" H 9275 5050 50  0000 L CNN
 F 2 "" H 9288 5000 50  0000 C CNN
 F 3 "" H 9250 5150 50  0000 C CNN
@@ -657,10 +658,10 @@ $EndComp
 Wire Wire Line
 	8800 5150 9100 5150
 $Comp
-L GND #PWR?
+L GND #PWR18
 U 1 1 57D88248
 P 9500 5150
-F 0 "#PWR?" H 9500 4900 50  0001 C CNN
+F 0 "#PWR18" H 9500 4900 50  0001 C CNN
 F 1 "GND" H 9500 5000 50  0000 C CNN
 F 2 "" H 9500 5150 50  0000 C CNN
 F 3 "" H 9500 5150 50  0000 C CNN
@@ -670,10 +671,10 @@ $EndComp
 Wire Wire Line
 	9400 5150 9500 5150
 $Comp
-L +5V #PWR?
+L +5V #PWR4
 U 1 1 57D888AD
 P 3150 4950
-F 0 "#PWR?" H 3150 4800 50  0001 C CNN
+F 0 "#PWR4" H 3150 4800 50  0001 C CNN
 F 1 "+5V" H 3150 5090 50  0000 C CNN
 F 2 "" H 3150 4950 50  0000 C CNN
 F 3 "" H 3150 4950 50  0000 C CNN
@@ -681,10 +682,10 @@ F 3 "" H 3150 4950 50  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L MCP6002 U?
+L MCP6002 U1
 U 1 1 57D88C5F
 P 2750 5150
-F 0 "U?" H 2750 5300 50  0000 L CNN
+F 0 "U1" H 2750 5300 50  0000 L CNN
 F 1 "MCP6002" H 2750 5000 50  0000 L CNN
 F 2 "" H 2650 5200 50  0000 C CNN
 F 3 "" H 2750 5300 50  0000 C CNN
@@ -692,10 +693,10 @@ F 3 "" H 2750 5300 50  0000 C CNN
 	0    1    1    0   
 $EndComp
 $Comp
-L MCP6002 U?
+L MCP6002 U1
 U 2 1 57D88D50
 P 4000 5150
-F 0 "U?" H 4000 5300 50  0000 L CNN
+F 0 "U1" H 4000 5300 50  0000 L CNN
 F 1 "MCP6002" H 4000 5000 50  0000 L CNN
 F 2 "" H 3900 5200 50  0000 C CNN
 F 3 "" H 4000 5300 50  0000 C CNN
@@ -727,10 +728,10 @@ Si5351 breakout board
 Text Notes 2150 1850 0    60   ~ 0
 ANT
 $Comp
-L GND #PWR?
+L GND #PWR5
 U 1 1 57D8AC18
 P 3300 4000
-F 0 "#PWR?" H 3300 3750 50  0001 C CNN
+F 0 "#PWR5" H 3300 3750 50  0001 C CNN
 F 1 "GND" H 3300 3850 50  0000 C CNN
 F 2 "" H 3300 4000 50  0000 C CNN
 F 3 "" H 3300 4000 50  0000 C CNN
@@ -738,10 +739,10 @@ F 3 "" H 3300 4000 50  0000 C CNN
 	0    1    1    0   
 $EndComp
 $Comp
-L GND #PWR?
+L GND #PWR1
 U 1 1 57D8ACE7
 P 2050 4000
-F 0 "#PWR?" H 2050 3750 50  0001 C CNN
+F 0 "#PWR1" H 2050 3750 50  0001 C CNN
 F 1 "GND" H 2050 3850 50  0000 C CNN
 F 2 "" H 2050 4000 50  0000 C CNN
 F 3 "" H 2050 4000 50  0000 C CNN
@@ -749,10 +750,10 @@ F 3 "" H 2050 4000 50  0000 C CNN
 	0    1    1    0   
 $EndComp
 $Comp
-L SW_PUSH SW?
+L SW_PUSH SW1
 U 1 1 57D8B330
 P 6050 5850
-F 0 "SW?" H 6200 5960 50  0000 C CNN
+F 0 "SW1" H 6200 5960 50  0000 C CNN
 F 1 "SW_PUSH" H 6050 5770 50  0000 C CNN
 F 2 "" H 6050 5850 50  0000 C CNN
 F 3 "" H 6050 5850 50  0000 C CNN
@@ -768,10 +769,10 @@ Wire Wire Line
 Text Label 6600 5850 0    60   ~ 0
 RESET
 $Comp
-L GND #PWR?
+L GND #PWR10
 U 1 1 57D8B741
 P 5650 5850
-F 0 "#PWR?" H 5650 5600 50  0001 C CNN
+F 0 "#PWR10" H 5650 5600 50  0001 C CNN
 F 1 "GND" H 5650 5700 50  0000 C CNN
 F 2 "" H 5650 5850 50  0000 C CNN
 F 3 "" H 5650 5850 50  0000 C CNN
@@ -780,4 +781,10 @@ F 3 "" H 5650 5850 50  0000 C CNN
 $EndComp
 Wire Wire Line
 	5650 5850 5750 5850
+Text Notes 7050 6700 0    60   ~ 0
+ZL1CVD based SWR meter without the TFT display
+Text Notes 5750 5650 0    60   ~ 0
+Arduino reset
+Text Notes 3250 1850 0    60   ~ 0
+Wheatstone impedance bridge
 $EndSCHEMATC