Si5351 arduino library added.

This commit is contained in:
klaute 2016-09-14 20:04:29 +02:00
parent 9cc1ebff77
commit 3d8299c508
6 changed files with 2852 additions and 0 deletions

6
README.me Normal file
View File

@ -0,0 +1,6 @@
This project is based on the TenaTester build by ZL1CVD.
Ressources:
* https://github.com/etherkit/Si5351Arduino
* http://images.google.de/imgres?imgurl=http://www.kh-gps.de/si5351_4.jpg&imgrefurl=http://www.kh-gps.de/si5351.htm&h=483&w=1115&tbnid=p6ACt2AabOao6M:&tbnh=90&tbnw=208&docid=YzcwWac64G4VOM&usg=__tpZeibmT-PYky-rOAt6f3X7w_7s=&sa=X&ved=0ahUKEwjggd_4tI_PAhUEnRQKHQHdAVUQ9QEIJzAC

574
Si5351Arduino/README.md Normal file
View File

@ -0,0 +1,574 @@
Si5351 Library for Arduino
==========================
This is a basic library for the Si5351 series of clock generator ICs from [Silicon Labs](http://www.silabs.com) for the Arduino development environment. It will allow you to control the Si5351 with an Arduino, and without depending on the proprietary ClockBuilder software from Silicon Labs.
This library is focused towards usage in RF/amateur radio applications, but it may be useful in other cases. However, keep in mind that coding decisions are and will be made with those applications in mind first, so if you need something a bit different, please do fork this repository. Also, since the Si5351A3 version is the one which seems most useful in amateur radio applications, this is where the current development will be focused. Once the Si5351A3 has a decent and mature feature set, hopefully we will be able to turn to the 8-output version, and perhaps even the B and C variants.
Please feel free to use the issues feature of GitHub if you run into problems or have suggestions for important features to implement.
Thanks For Your Support!
------------------------
If you would like to support my library development efforts, I would ask that you please consider purchasing a Si5351A Breakout Board from my [online store at etherkit.com](https://www.etherkit.com). Thank you!
Library Installation
---------------------
The best way to install the library is via the Arduino Library Manager, which is available if you are using Arduino IDE version 1.6.2 or greater. To install it this way, simply go to the menu Sketch > Include Library > Manage Libraries..., and then in the search box at the upper-right, type "Etherkit Si5351". Click on the entry in the list below, then click on the provided "Install" button. By installing the library this way, you will always have notifications of future library updates, and can easily switch between library versions.
If you need to or would like to install the library in the old way, then you can download a copy of the library in a ZIP file. Download a ZIP file of the library from the GitHub repository by using the "Download ZIP" button at the right of the main repository page. Extract the ZIP file, then rename the unzipped folder as "Si5351". Finally, open the Arduino IDE, select menu Sketch > Import Library... > Add Library..., and select the renamed folder that you just downloaded. Restart the IDE and you should have access to the new library.
Hardware Requirements and Setup
-------------------------------
This library has been written for the Arduino platform and has been successfully tested on the Arduino Uno and an Uno clone. There should be no reason that it would not work on any other Arduino hardware with I2C support.
The Si5351 is a +3.3 V only part, so if you are not using a +3.3 V microcontroller, be sure you have some kind of level conversion strategy.
Wire the SDA and SCL pins of the Si5351 to the corresponding pins on the Arduino. Use the pin assignments posted on the [Arduino Wire library page](http://arduino.cc/en/Reference/Wire). Since the I2C interface is set to 100 kHz, use 1 to 10 kΩ pullup resistors from +3.3 V to the SDA and SCL lines.
Connect a 25 MHz or 27 MHz crystal with a load capacitance of 6, 8, or 10 pF to the Si5351 XA and XB pins. Locate the crystal as close to the Si5351 as possible and keep the traces as short as possible. Please use a SMT crystal. A crystal with leads will have too much stray capacitance.
Example
-------
Include the Si5351Arduino library into your instance of the Arduino IDE. Download a ZIP file of the library from the GitHub repository by using the "Download ZIP" button at the right of the main repository page. Extract the ZIP file, then rename the unzipped folder as "Si5351". Finally, open the Arduino IDE, select menu Sketch > Import Library... > Add Library..., and select the renamed folder that you just downloaded. Restart the IDE and you should have access to the new library.
(Yes, the Arduino IDE can import a ZIP file, but it doesn't like filenames with characters such as dashes, as GitHub does when it appends the branch name with a dash. Perhaps there's an elegant way around this, we'll see.)
There is a simple example that is placed in your examples menu under Si5351Arduino. Open this to see how to initialize the Si5351 and set a couple of the outputs to different frequencies. The commentary below will analyze the sample sketch.
Before you do anything with the Si5351, you will need to include the "si5351.h" and "Wire.h" header files and instantiate the Si5351 class.
#include "si5351.h"
#include "Wire.h"
Si5351 si5351;
Now in the Setup() function, let's initialize communications with the Si5351, specify the load capacitance of the reference crystal, and to use the default reference oscillator frequency of 25 MHz:
si5351.init(SI5351_CRYSTAL_LOAD_8PF, 0);
Next, let's set the CLK0 output to 14 MHz and use a fixed PLL reference frequency (this allows for glitch-free tuning):
si5351.set_pll(SI5351_PLL_FIXED, SI5351_PLLA);
si5351.set_freq(1400000000ULL, SI5351_PLL_FIXED, SI5351_CLK0);
Frequencies are indicated in units of 0.01 Hz. Therefore, if you prefer to work in 1 Hz increments in your own code, simply multiply each frequency passed to the library by 100ULL (better yet, use the define called SI5351_FREQ_MULT in the header file for this multiplication).
The second value passed in the above method is the desired driving PLL frequency. Entering a 0 will have the method choose a PLL frequency for you. If you would like to use a fixed PLL frequency to drive a multisynth (in order to ensure glitch-free tuning), set the desired PLL frequency first using the method below, then specify that frequency in the set_freq() method. The PLL frequency only needs to be set once. Any additional frequency changes only need to use the set_freq() method as long as you are using the same PLL frequency as before.
Now let's set the CLK1 output to 20 MHz output, and let the Si5351 class pick a PLL frequency:
si5351.set_freq(2000000000ULL, 0ULL, SI5351_CLK1);
In the main Loop(), we use the Serial port to monitor the status of the Si5351, using a method to update a public struct which holds the status bits:
si5351.update_status();
Serial.print("SYS_INIT: ");
Serial.print(si5351.dev_status.SYS_INIT);
Serial.print(" LOL_A: ");
Serial.print(si5351.dev_status.LOL_A);
Serial.print(" LOL_B: ");
Serial.print(si5351.dev_status.LOL_B);
Serial.print(" LOS: ");
Serial.print(si5351.dev_status.LOS);
Serial.print(" REVID: ");
Serial.println(si5351.dev_status.REVID);
Setting the Output Frequency
----------------------------
As indicated above, the library accepts and indicates clock and PLL frequencies in units of 0.01 Hz, as an _unsigned long long_ variable type (or _uint64_t_). When entering literal values, append "ULL" to make an explicit unsigned long long number to ensure proper tuning. Since many applications won't require sub-Hertz tuning, you may wish to use an _unsigned long_ (or _uint32_t_) variable to hold your tune frequency, then scale it up by multiplying by 100ULL before passing it to the set_freq() method.
The most simple way to set the output frequency is to let the library pick a PLL assignment for you. You do this by passing a 0 to the set_freq() method in the 2nd parameter:
si5351.set_freq(1014000000ULL, 0ULL, SI5351_CLK0);
If you let the library make PLL assignments, it will assign CLK0 to PLLA and both CLK1 and CLK2 to PLLB.
If that is not suitable, such as when you need glitch-free tuning or you are counting on multiple clocks being locked to the same reference, you may set the PLL frequency manually then make clock reference assignments to either of the PLLs.
Manually Selecting a PLL Frequency
----------------------------------
The Si5351 consists of two main stages: two PLLs which are locked to the 25 or 27 MHz reference oscillator and which can be set from 600 to 900 MHz, and the output (multisynth) clocks which are locked to a PLL and can be set from 1 to 160 MHz. Instead of letting the library choose a PLL frequency for your chosen output frequency, you can choose it yourself by using the set_pll() method, and then using the same frequency in the second parameter in the call to set_freq() (as is shown in the example above).
Keep in mind when you are setting the PLL manually, that you need to be mindful of the limits of the IC. The multisynth is a fractional PLL, with limits described in AN619 as:
>Valid Multisynth divider ratios are 4, 6, 8, and any fractional value between 8 + 1/1,048,575 and 900 + 0/1.
This means that if any output is greater than 112.5 MHz (900 MHz/8), then this output frequency sets one
of the VCO frequencies.
To put this in other words, if you want to manually set the PLL and wish to have an output frequency greater than 112.5 MHz, then the choice of PLL frequency is dictated by the choice of output frequency, and will need to be an even multiple of 4, 6, or 8.
Further Details
---------------
If we like we can adjust the output drive power:
si5351.drive_strength(SI5351_CLK0, SI5351_DRIVE_4MA);
The drive strength is the amount of current into a 50Ω load. 2 mA roughly corresponds to 7 dBm output and 8 mA is approximately 14 dBm output.
Individual outputs can be turned on and off. In the second argument, use a 0 to disable and 1 to enable:
si5351.output_enable(SI5351_CLK0, 0);
You may invert a clock output signal by using this command:
set_clock_invert(SI5351_CLK0, 1);
Calibration
-----------
There will be some inherent error in the reference oscillator's actual frequency, so we can account for this by measuring the difference between the uncalibrated actual and nominal output frequencies, then using that difference as a correction factor in the library. The set_correction() method uses a signed integer calibration constant measured in parts-per-billion. The easist way to determine this correction factor is to measure a 10 MHz signal from one of the clock outputs (in Hz, or better resolution if you can measure it), scale it to parts-per-billion, then use it in the set_correction() method in future use of this particular reference oscillator. Once this correction factor is determined, it should not need to be measured again for the same reference oscillator/Si5351 pair unless you want to redo the calibration. With an accurate measurement at one frequency, this calibration should be good across the entire tuning range.
The calibration method is called like this:
si5351.set_correction(-6190);
A handy calibration program is provided with the library in the example folder named _si5351calibration_. To use it, simply hook up your Arduino to your Si5351, then connect it to a PC with the Arduino IDE. Connect the CLK0 output of the Si5351 to a frequency counter capable of measuring at 10 MHz (the more resolution, the better). Load the sketch then open the serial terminal window. Follow the prompts in the serial terminal to change the output frequency until your frequency counter reads exactly 10.000 000 00 MHz. The output from the Arduino on your serial terminal will tell you the correction factor you will need for future use of that reference oscillator/Si5351 combination.
One thing to note: the library is set for a 25 MHz reference crystal. If you are using a 27 MHz crystal, use the second parameter in the init() function to specify that as the reference oscillator frequency.
Phase
------
The phase of the output clock signal can be changed by using the set_phase() method. Phase is in relation to (and measured against the period of) the PLL that the output multisynth is referencing. When you change the phase register from its default of 0, you will need to keep a few considerations in mind.
Setting the phase of a clock requires that you manually set the PLL and take the PLL frequency into account when calculation the value to place in the phase register. As shown on page 10 of Silicon Labs Application Note 619 (AN619), the phase register is a 7-bit register, where a bit represents a phase difference of 1/4 the PLL period. Therefore, the best way to get an accurate phase setting is to make the PLL an even multiple of the clock frequency, depending on what phase you need.
If you need a 90 degree phase shift (as in many RF applications), then it is quite easy to determine your parameters. Pick a PLL frequency that is an even multiple of your clock frequency (remember that the PLL needs to be in the range of 600 to 900 MHz). Then to set a 90 degree phase shift, you simply enter that multiple into the phase register. Remember when setting multiple outputs to be phase-related to each other, they each need to be referenced to the same PLL.
You can see this in action in a sketch in the examples folder called _si5351phase_. It shows how one would set up an I/Q pair of signals at 14.1 MHz.
// We will output 14.1 MHz on CLK0 and CLK1.
// A PLLA frequency of 705 MHz was chosen to give an even
// divisor by 14.1 MHz.
unsigned long long freq = 1410000000ULL;
unsigned long long pll_freq = 70500000000ULL;
// Set PLLA to the chosen frequency
si5351.set_pll(pll_freq, SI5351_PLLA);
// Set CLK0 and CLK1 to use PLLA as the MS source
si5351.set_ms_source(SI5351_CLK0, SI5351_PLLA);
si5351.set_ms_source(SI5351_CLK1, SI5351_PLLA);
// Set CLK0 and CLK1 to output 14.1 MHz with a fixed PLL frequency
si5351.set_freq(freq, pll_freq, SI5351_CLK0);
si5351.set_freq(freq, pll_freq, SI5351_CLK1);
// Now we can set CLK1 to have a 90 deg phase shift by entering
// 50 in the CLK1 phase register, since the ratio of the PLL to
// the clock frequency is 50.
si5351.set_phase(SI5351_CLK0, 0);
si5351.set_phase(SI5351_CLK1, 50);
// We need to reset the PLL before they will be in phase alignment
si5351.pll_reset(SI5351_PLLA);
Constraints
-----------
* Two multisynths cannot share a PLL with when both outputs are < 1.024 MHz or >= 112.5 MHz. The library will refuse to set another multisynth to a frequency in that range if another multisynth sharing the same PLL is already within that frequency range.
* Setting phase will be limited in the extreme edges of the output tuning ranges. Because the phase register is 7-bits in size and is denominated in units representing 1/4 the PLL period, not all phases can be set for all output frequencies. For example, if you need a 90&deg; phase shift, the lowest frequency you can set it at is 4.6875 MHz (600 MHz PLL/128).
Public Methods
--------------
###init()
```
/*
* init(uint8_t xtal_load_c, uint32_t ref_osc_freq)
*
* Setup communications to the Si5351 and set the crystal
* load capacitance.
*
* xtal_load_c - Crystal load capacitance. Use the SI5351_CRYSTAL_LOAD_*PF
* defines in the header file
* ref_osc_freq - Crystal/reference oscillator frequency in 1 Hz increments.
* Defaults to 25000000 if a 0 is used here.
*
*/
void Si5351::init(uint8_t xtal_load_c, uint32_t ref_osc_freq)
```
###set_freq()
```
/*
* set_freq(uint64_t freq, uint64_t pll_freq, enum si5351_clock output)
*
* Sets the clock frequency of the specified CLK output
*
* freq - Output frequency in Hz
* pll_freq - Frequency of the PLL driving the Multisynth
* Use a 0 to have the function choose a PLL frequency
* clk - Clock output
* (use the si5351_clock enum)
*/
uint8_t Si5351::set_freq(uint64_t freq, uint64_t pll_freq, enum si5351_clock clk)
```
###set_pll()
```
/*
* set_pll(uint64_t pll_freq, enum si5351_pll target_pll)
*
* Set the specified PLL to a specific oscillation frequency
*
* pll_freq - Desired PLL frequency
* target_pll - Which PLL to set
* (use the si5351_pll enum)
*/
void Si5351::set_pll(uint64_t pll_freq, enum si5351_pll target_pll)
```
###set_ms()
```
/*
* set_ms(enum si5351_clock clk, struct Si5351RegSet ms_reg, uint8_t int_mode, uint8_t r_div, uint8_t div_by_4)
*
* Set the specified multisynth parameters. Not normally needed, but public for advanced users.
*
* clk - Clock output
* (use the si5351_clock enum)
* int_mode - Set integer mode
* Set to 1 to enable, 0 to disable
* r_div - Desired r_div ratio
* div_by_4 - Set Divide By 4 mode
* Set to 1 to enable, 0 to disable
*/
void Si5351::set_ms(enum si5351_clock clk, struct Si5351RegSet ms_reg, uint8_t int_mode, uint8_t r_div, uint8_t div_by_4)
```
###output_enable()
```
/*
* output_enable(enum si5351_clock clk, uint8_t enable)
*
* Enable or disable a chosen output
* clk - Clock output
* (use the si5351_clock enum)
* enable - Set to 1 to enable, 0 to disable
*/
void Si5351::output_enable(enum si5351_clock clk, uint8_t enable)
```
###drive_strength()
```
/*
* drive_strength(enum si5351_clock clk, enum si5351_drive drive)
*
* Sets the drive strength of the specified clock output
*
* clk - Clock output
* (use the si5351_clock enum)
* drive - Desired drive level
* (use the si5351_drive enum)
*/
void Si5351::drive_strength(enum si5351_clock clk, enum si5351_drive drive)
```
###update_status()
```
/*
* update_status(void)
*
* Call this to update the status structs, then access them
* via the dev_status and dev_int_status global variables.
*
* See the header file for the struct definitions. These
* correspond to the flag names for registers 0 and 1 in
* the Si5351 datasheet.
*/
void Si5351::update_status(void)
```
###set_correction()
```
/*
* set_correction(int32_t corr)
*
* Use this to set the oscillator correction factor to
* EEPROM. This value is a signed 32-bit integer of the
* parts-per-billion value that the actual oscillation
* frequency deviates from the specified frequency.
*
* The frequency calibration is done as a one-time procedure.
* Any desired test frequency within the normal range of the
* Si5351 should be set, then the actual output frequency
* should be measured as accurately as possible. The
* difference between the measured and specified frequencies
* should be calculated in Hertz, then multiplied by 10 in
* order to get the parts-per-billion value.
*
* Since the Si5351 itself has an intrinsic 0 PPM error, this
* correction factor is good across the entire tuning range of
* the Si5351. Once this calibration is done accurately, it
* should not have to be done again for the same Si5351 and
* crystal. The library will read the correction factor from
* EEPROM during initialization for use by the tuning
* algorithms.
*/
void Si5351::set_correction(int32_t corr)
```
###set_phase()
```
/*
* set_phase(enum si5351_clock clk, uint8_t phase)
*
* clk - Clock output
* (use the si5351_clock enum)
* phase - 7-bit phase word
* (in units of VCO/4 period)
*
* Write the 7-bit phase register. This must be used
* with a user-set PLL frequency so that the user can
* calculate the proper tuning word based on the PLL period.
*/
void Si5351::set_phase(enum si5351_clock clk, uint8_t phase)
```
###get_correction()
```
/*
* get_correction(void)
*
* Returns the oscillator correction factor stored
* in RAM.
*/
int32_t Si5351::get_correction(void)
```
###pll_reset()
```
/*
* pll_reset(enum si5351_pll target_pll)
*
* target_pll - Which PLL to reset
* (use the si5351_pll enum)
*
* Apply a reset to the indicated PLL.
*/
void Si5351::pll_reset(enum si5351_pll target_pll)
```
###set_ms_source()
```
/*
* set_ms_source(enum si5351_clock clk, enum si5351_pll pll)
*
* clk - Clock output
* (use the si5351_clock enum)
* pll - Which PLL to use as the source
* (use the si5351_pll enum)
*
* Set the desired PLL source for a multisynth.
*/
void Si5351::set_ms_source(enum si5351_clock clk, enum si5351_pll pll)
```
###set_int()
```
/*
* set_int(enum si5351_clock clk, uint8_t int_mode)
*
* clk - Clock output
* (use the si5351_clock enum)
* enable - Set to 1 to enable, 0 to disable
*
* Set the indicated multisynth into integer mode.
*/
void Si5351::set_int(enum si5351_clock clk, uint8_t enable)
```
###set_clock_pwr()
```
/*
* set_clock_pwr(enum si5351_clock clk, uint8_t pwr)
*
* clk - Clock output
* (use the si5351_clock enum)
* pwr - Set to 1 to enable, 0 to disable
*
* Enable or disable power to a clock output (a power
* saving feature).
*/
void Si5351::set_clock_pwr(enum si5351_clock clk, uint8_t pwr)
```
###set_clock_invert()
```
/*
* set_clock_invert(enum si5351_clock clk, uint8_t inv)
*
* clk - Clock output
* (use the si5351_clock enum)
* inv - Set to 1 to enable, 0 to disable
*
* Enable to invert the clock output waveform.
*/
void Si5351::set_clock_invert(enum si5351_clock clk, uint8_t inv)
```
###set_clock_source()
```
/*
* set_clock_source(enum si5351_clock clk, enum si5351_clock_source src)
*
* clk - Clock output
* (use the si5351_clock enum)
* src - Which clock source to use for the multisynth
* (use the si5351_clock_source enum)
*
* Set the clock source for a multisynth (based on the options
* presented for Registers 16-23 in the Silicon Labs AN619 document).
* Choices are XTAL, CLKIN, MS0, or the multisynth associated with
* the clock output.
*/
void Si5351::set_clock_source(enum si5351_clock clk, enum si5351_clock_source src)
```
###set_clock_disable()
```
/*
* set_clock_disable(enum si5351_clock clk, enum si5351_clock_disable dis_state)
*
* clk - Clock output
* (use the si5351_clock enum)
* dis_state - Desired state of the output upon disable
* (use the si5351_clock_disable enum)
*
* Set the state of the clock output when it is disabled. Per page 27
* of AN619 (Registers 24 and 25), there are four possible values: low,
* high, high impedance, and never disabled.
*/
void Si5351::set_clock_disable(enum si5351_clock clk, enum si5351_clock_disable dis_state)
```
###set_clock_fanout()
```
/*
* set_clock_fanout(enum si5351_clock_fanout fanout, uint8_t enable)
*
* fanout - Desired clock fanout
* (use the si5351_clock_fanout enum)
* enable - Set to 1 to enable, 0 to disable
*
* Use this function to enable or disable the clock fanout options
* for individual clock outputs. If you intend to output the XO or
* CLKIN on the clock outputs, enable this first.
*
* By default, only the Multisynth fanout is enabled at startup.
*/
void Si5351::set_clock_fanout(enum si5351_clock_fanout fanout, uint8_t enable)
```
###set_pll_input()
```
/*
* set_pll_input(enum si5351_pll pll, enum si5351_pll_input input)
*
* pll - Which PLL to use as the source
* (use the si5351_pll enum)
* input - Which reference oscillator to use as PLL input
* (use the si5351_pll_input enum)
*
* Set the desired reference oscillator source for the given PLL.
*/
void Si5351::set_pll_input(enum si5351_pll pll, enum si5351_pll_input input)
```
###si5351_write_bulk()
```
uint8_t Si5351::si5351_write_bulk(uint8_t addr, uint8_t bytes, uint8_t *data)
```
###si5351_write()
```
uint8_t Si5351::si5351_write(uint8_t addr, uint8_t data)
```
###si5351_read()
```
uint8_t Si5351::si5351_read(uint8_t addr)
```
Tokens
------
Here are the defines, structs, and enumerations you will find handy to use with the library.
Crystal load capacitance:
SI5351_CRYSTAL_LOAD_0PF
SI5351_CRYSTAL_LOAD_6PF
SI5351_CRYSTAL_LOAD_8PF
SI5351_CRYSTAL_LOAD_10PF
Clock outputs:
enum si5351_clock {SI5351_CLK0, SI5351_CLK1, SI5351_CLK2, SI5351_CLK3,
SI5351_CLK4, SI5351_CLK5, SI5351_CLK6, SI5351_CLK7};
PLL sources:
enum si5351_pll {SI5351_PLLA, SI5351_PLLB};
Drive levels:
enum si5351_drive {SI5351_DRIVE_2MA, SI5351_DRIVE_4MA, SI5351_DRIVE_6MA, SI5351_DRIVE_8MA};
Clock sources:
enum si5351_clock_source {SI5351_CLK_SRC_XTAL, SI5351_CLK_SRC_CLKIN, SI5351_CLK_SRC_MS0, SI5351_CLK_SRC_MS};
Clock disable states:
enum si5351_clock_disable {SI5351_CLK_DISABLE_LOW, SI5351_CLK_DISABLE_HIGH, SI5351_CLK_DISABLE_HI_Z, SI5351_CLK_DISABLE_NEVER};
Clock fanout:
enum si5351_clock_fanout {SI5351_FANOUT_CLKIN, SI5351_FANOUT_XO, SI5351_FANOUT_MS};
PLL input sources:
enum si5351_pll_input{SI5351_PLL_INPUT_XO, SI5351_PLL_INPUT_CLKIN};
Status register:
struct Si5351Status
{
uint8_t SYS_INIT;
uint8_t LOL_B;
uint8_t LOL_A;
uint8_t LOS;
uint8_t REVID;
};
Interrupt register:
struct Si5351IntStatus
{
uint8_t SYS_INIT_STKY;
uint8_t LOL_B_STKY;
uint8_t LOL_A_STKY;
uint8_t LOS_STKY;
};
Raw Commands
------------
If you need to read and write raw data to the Si5351, there is public access to the library's read(), write(), and write_bulk() methods.
Changes from alpha version
--------------------------
* Added reference oscillator frequency parameter to init()
* Changed the correction factor from parts-per-ten million to parts-per-billion
Oddities
--------
Right now, this code is focused solely on the 3-output 10-MSOP variant (Si5351A3). Since some of the code was derived from the Si5351 driver in the Linux kernel, it may be useable on with the other variants, but certainly many features won't work yet. With any luck, we will get the library to work with the other variants as well, or even better, maybe someone will take the initiative, write the code, and send me a pull request.
Changelog
---------
* v1.1.2
Fix error where register 183 is not pre-loaded with correct value per AN619. Add define for SI5351_CRYSTAL_LOAD_0PF (undocumented in AN619 but present in the official ClockBuilder software).
* v1.1.1
Fix if statement eval error in set_clock_disable()
* v1.1.0
Added set_pll_input() method to allow toggling the PLL reference source for the Si5351C variant and added support to init() for different PLL reference frequencies from 10 to 100 MHz.
* v1.0.0
Initial release
TODO
----
- [x] Create an interface to the ref osc frequency
- [x] Implement clock disable state
- [x] Implement invert
- [x] Implement power up/down
- [x] Implement phase register access
- [x] Implement tuning above 150 MHz
- [x] Implement tuning below 1 MHz
- [x] Implement sub-Hz tuning
- [x] Implement PLL reset
[1]: http://www.silabs.com
[2]: https://www.etherkit.com

View File

@ -0,0 +1,9 @@
name=Etherkit Si5351
version=1.1.2
author=Jason Milldrum <milldrum@gmail.com>
maintainer=Jason Milldrum <milldrum@gmail.com>
sentence=A full-featured library for the Si5351 series of clock generator ICs from Silicon Labs
paragraph=This library will allow you to control all features of the Si5351, without depending on the proprietary ClockBuilder software from Silicon Labs.
category=Device Control
url=https://github.com/etherkit/Si5351Arduino
architectures=*

674
Si5351Arduino/licence.txt Normal file
View File

@ -0,0 +1,674 @@
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for
software and other kinds of works.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users. We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors. You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights. Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive
or can get the source code. And you must show them these terms so they
know their rights.
Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software. For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.
Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so. This is fundamentally incompatible with the aim of
protecting users' freedom to change the software. The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable. Therefore, we
have designed this version of the GPL to prohibit the practice for those
products. If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary. To prevent this, the GPL assures that
patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:
<program> Copyright (C) <year> <name of author>
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".
You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.
The GNU General Public License does not permit incorporating your program
into proprietary programs. If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License. But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

1273
Si5351Arduino/src/si5351.cpp Normal file

File diff suppressed because it is too large Load Diff

316
Si5351Arduino/src/si5351.h Normal file
View File

@ -0,0 +1,316 @@
/*
* si5351.h - Si5351 library for Arduino
*
* Copyright (C) 2015-2016 Jason Milldrum <milldrum@gmail.com>
* Dana H. Myers <k6jq@comcast.net>
*
* Many defines derived from clk-si5351.h in the Linux kernel.
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* Rabeeh Khoury <rabeeh@solid-run.com>
*
* do_div() macro derived from /include/asm-generic/div64.h in
* the Linux kernel.
* Copyright (C) 2003 Bernardo Innocenti <bernie@develer.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef SI5351_H_
#define SI5351_H_
#include "Arduino.h"
#include "Wire.h"
#include <stdint.h>
/* Define definitions */
#define SI5351_BUS_BASE_ADDR 0x60
#define SI5351_XTAL_FREQ 25000000
#define SI5351_PLL_FIXED 90000000000ULL
#define SI5351_FREQ_MULT 100ULL
#define SI5351_DEFAULT_CLK 1000000000ULL
#define SI5351_PLL_VCO_MIN 600000000
#define SI5351_PLL_VCO_MAX 900000000
#define SI5351_MULTISYNTH_MIN_FREQ 1000000
#define SI5351_MULTISYNTH_DIVBY4_FREQ 150000000
#define SI5351_MULTISYNTH_MAX_FREQ 160000000
#define SI5351_MULTISYNTH_SHARE_MAX 112500000
#define SI5351_MULTISYNTH67_MAX_FREQ SI5351_MULTISYNTH_DIVBY4_FREQ
#define SI5351_CLKOUT_MIN_FREQ 8000
#define SI5351_CLKOUT_MAX_FREQ SI5351_MULTISYNTH_MAX_FREQ
#define SI5351_CLKOUT67_MAX_FREQ SI5351_MULTISYNTH67_MAX_FREQ
#define SI5351_PLL_A_MIN 15
#define SI5351_PLL_A_MAX 90
#define SI5351_PLL_B_MAX (SI5351_PLL_C_MAX-1)
#define SI5351_PLL_C_MAX 1048575
#define SI5351_MULTISYNTH_A_MIN 6
#define SI5351_MULTISYNTH_A_MAX 1800
#define SI5351_MULTISYNTH67_A_MAX 254
#define SI5351_MULTISYNTH_B_MAX (SI5351_MULTISYNTH_C_MAX-1)
#define SI5351_MULTISYNTH_C_MAX 1048575
#define SI5351_MULTISYNTH_P1_MAX ((1<<18)-1)
#define SI5351_MULTISYNTH_P2_MAX ((1<<20)-1)
#define SI5351_MULTISYNTH_P3_MAX ((1<<20)-1)
#define SI5351_DEVICE_STATUS 0
#define SI5351_INTERRUPT_STATUS 1
#define SI5351_INTERRUPT_MASK 2
#define SI5351_STATUS_SYS_INIT (1<<7)
#define SI5351_STATUS_LOL_B (1<<6)
#define SI5351_STATUS_LOL_A (1<<5)
#define SI5351_STATUS_LOS (1<<4)
#define SI5351_OUTPUT_ENABLE_CTRL 3
#define SI5351_OEB_PIN_ENABLE_CTRL 9
#define SI5351_PLL_INPUT_SOURCE 15
#define SI5351_CLKIN_DIV_MASK (3<<6)
#define SI5351_CLKIN_DIV_1 (0<<6)
#define SI5351_CLKIN_DIV_2 (1<<6)
#define SI5351_CLKIN_DIV_4 (2<<6)
#define SI5351_CLKIN_DIV_8 (3<<6)
#define SI5351_PLLB_SOURCE (1<<3)
#define SI5351_PLLA_SOURCE (1<<2)
#define SI5351_CLK0_CTRL 16
#define SI5351_CLK1_CTRL 17
#define SI5351_CLK2_CTRL 18
#define SI5351_CLK3_CTRL 19
#define SI5351_CLK4_CTRL 20
#define SI5351_CLK5_CTRL 21
#define SI5351_CLK6_CTRL 22
#define SI5351_CLK7_CTRL 23
#define SI5351_CLK_POWERDOWN (1<<7)
#define SI5351_CLK_INTEGER_MODE (1<<6)
#define SI5351_CLK_PLL_SELECT (1<<5)
#define SI5351_CLK_INVERT (1<<4)
#define SI5351_CLK_INPUT_MASK (3<<2)
#define SI5351_CLK_INPUT_XTAL (0<<2)
#define SI5351_CLK_INPUT_CLKIN (1<<2)
#define SI5351_CLK_INPUT_MULTISYNTH_0_4 (2<<2)
#define SI5351_CLK_INPUT_MULTISYNTH_N (3<<2)
#define SI5351_CLK_DRIVE_STRENGTH_MASK (3<<0)
#define SI5351_CLK_DRIVE_STRENGTH_2MA (0<<0)
#define SI5351_CLK_DRIVE_STRENGTH_4MA (1<<0)
#define SI5351_CLK_DRIVE_STRENGTH_6MA (2<<0)
#define SI5351_CLK_DRIVE_STRENGTH_8MA (3<<0)
#define SI5351_CLK3_0_DISABLE_STATE 24
#define SI5351_CLK7_4_DISABLE_STATE 25
#define SI5351_CLK_DISABLE_STATE_MASK 3
#define SI5351_CLK_DISABLE_STATE_LOW 0
#define SI5351_CLK_DISABLE_STATE_HIGH 1
#define SI5351_CLK_DISABLE_STATE_FLOAT 2
#define SI5351_CLK_DISABLE_STATE_NEVER 3
#define SI5351_PARAMETERS_LENGTH 8
#define SI5351_PLLA_PARAMETERS 26
#define SI5351_PLLB_PARAMETERS 34
#define SI5351_CLK0_PARAMETERS 42
#define SI5351_CLK1_PARAMETERS 50
#define SI5351_CLK2_PARAMETERS 58
#define SI5351_CLK3_PARAMETERS 66
#define SI5351_CLK4_PARAMETERS 74
#define SI5351_CLK5_PARAMETERS 82
#define SI5351_CLK6_PARAMETERS 90
#define SI5351_CLK7_PARAMETERS 91
#define SI5351_CLK6_7_OUTPUT_DIVIDER 92
#define SI5351_OUTPUT_CLK_DIV_MASK (7 << 4)
#define SI5351_OUTPUT_CLK6_DIV_MASK (7 << 0)
#define SI5351_OUTPUT_CLK_DIV_SHIFT 4
#define SI5351_OUTPUT_CLK_DIV6_SHIFT 0
#define SI5351_OUTPUT_CLK_DIV_1 0
#define SI5351_OUTPUT_CLK_DIV_2 1
#define SI5351_OUTPUT_CLK_DIV_4 2
#define SI5351_OUTPUT_CLK_DIV_8 3
#define SI5351_OUTPUT_CLK_DIV_16 4
#define SI5351_OUTPUT_CLK_DIV_32 5
#define SI5351_OUTPUT_CLK_DIV_64 6
#define SI5351_OUTPUT_CLK_DIV_128 7
#define SI5351_OUTPUT_CLK_DIVBY4 (3<<2)
#define SI5351_SSC_PARAM0 149
#define SI5351_SSC_PARAM1 150
#define SI5351_SSC_PARAM2 151
#define SI5351_SSC_PARAM3 152
#define SI5351_SSC_PARAM4 153
#define SI5351_SSC_PARAM5 154
#define SI5351_SSC_PARAM6 155
#define SI5351_SSC_PARAM7 156
#define SI5351_SSC_PARAM8 157
#define SI5351_SSC_PARAM9 158
#define SI5351_SSC_PARAM10 159
#define SI5351_SSC_PARAM11 160
#define SI5351_SSC_PARAM12 161
#define SI5351_VXCO_PARAMETERS_LOW 162
#define SI5351_VXCO_PARAMETERS_MID 163
#define SI5351_VXCO_PARAMETERS_HIGH 164
#define SI5351_CLK0_PHASE_OFFSET 165
#define SI5351_CLK1_PHASE_OFFSET 166
#define SI5351_CLK2_PHASE_OFFSET 167
#define SI5351_CLK3_PHASE_OFFSET 168
#define SI5351_CLK4_PHASE_OFFSET 169
#define SI5351_CLK5_PHASE_OFFSET 170
#define SI5351_PLL_RESET 177
#define SI5351_PLL_RESET_B (1<<7)
#define SI5351_PLL_RESET_A (1<<5)
#define SI5351_CRYSTAL_LOAD 183
#define SI5351_CRYSTAL_LOAD_MASK (3<<6)
#define SI5351_CRYSTAL_LOAD_0PF (0<<6)
#define SI5351_CRYSTAL_LOAD_6PF (1<<6)
#define SI5351_CRYSTAL_LOAD_8PF (2<<6)
#define SI5351_CRYSTAL_LOAD_10PF (3<<6)
#define SI5351_FANOUT_ENABLE 187
#define SI5351_CLKIN_ENABLE (1<<7)
#define SI5351_XTAL_ENABLE (1<<6)
#define SI5351_MULTISYNTH_ENABLE (1<<4)
/* Macro definitions */
#define RFRAC_DENOM ((1L << 20) - 1)
/*
* Based on former asm-ppc/div64.h and asm-m68knommu/div64.h
*
* The semantics of do_div() are:
*
* uint32_t do_div(uint64_t *n, uint32_t base)
* {
* uint32_t remainder = *n % base;
* *n = *n / base;
* return remainder;
* }
*
* NOTE: macro parameter n is evaluated multiple times,
* beware of side effects!
*/
# define do_div(n,base) ({ \
uint64_t __base = (base); \
uint64_t __rem; \
__rem = ((uint64_t)(n)) % __base; \
(n) = ((uint64_t)(n)) / __base; \
__rem; \
})
/* Enum definitions */
/*
* enum si5351_variant - SiLabs Si5351 chip variant
* @SI5351_VARIANT_A: Si5351A (8 output clocks, XTAL input)
* @SI5351_VARIANT_A3: Si5351A MSOP10 (3 output clocks, XTAL input)
* @SI5351_VARIANT_B: Si5351B (8 output clocks, XTAL/VXCO input)
* @SI5351_VARIANT_C: Si5351C (8 output clocks, XTAL/CLKIN input)
*/
enum si5351_variant {SI5351_VARIANT_A, SI5351_VARIANT_A3, SI5351_VARIANT_B,
SI5351_VARIANT_C};
enum si5351_clock {SI5351_CLK0, SI5351_CLK1, SI5351_CLK2, SI5351_CLK3,
SI5351_CLK4, SI5351_CLK5, SI5351_CLK6, SI5351_CLK7, SI5351_CLKNONE};
enum si5351_pll {SI5351_PLLA, SI5351_PLLB};
enum si5351_drive {SI5351_DRIVE_2MA, SI5351_DRIVE_4MA, SI5351_DRIVE_6MA,
SI5351_DRIVE_8MA};
enum si5351_clock_source {SI5351_CLK_SRC_XTAL, SI5351_CLK_SRC_CLKIN,
SI5351_CLK_SRC_MS0, SI5351_CLK_SRC_MS};
enum si5351_clock_disable {SI5351_CLK_DISABLE_LOW, SI5351_CLK_DISABLE_HIGH,
SI5351_CLK_DISABLE_HI_Z, SI5351_CLK_DISABLE_NEVER};
enum si5351_clock_fanout {SI5351_FANOUT_CLKIN, SI5351_FANOUT_XO,
SI5351_FANOUT_MS};
enum si5351_pll_input{SI5351_PLL_INPUT_XO, SI5351_PLL_INPUT_CLKIN};
/* Struct definitions */
struct Si5351RegSet
{
uint32_t p1;
uint32_t p2;
uint32_t p3;
};
struct Si5351Status
{
uint8_t SYS_INIT;
uint8_t LOL_B;
uint8_t LOL_A;
uint8_t LOS;
uint8_t REVID;
};
struct Si5351IntStatus
{
uint8_t SYS_INIT_STKY;
uint8_t LOL_B_STKY;
uint8_t LOL_A_STKY;
uint8_t LOS_STKY;
};
class Si5351
{
public:
Si5351(void);
void init(uint8_t, uint32_t);
uint8_t set_freq(uint64_t, uint64_t, enum si5351_clock);
void set_pll(uint64_t, enum si5351_pll);
void set_ms(enum si5351_clock, struct Si5351RegSet, uint8_t, uint8_t, uint8_t);
void output_enable(enum si5351_clock, uint8_t);
void drive_strength(enum si5351_clock, enum si5351_drive);
void update_status(void);
void set_correction(int32_t);
void set_phase(enum si5351_clock, uint8_t);
int32_t get_correction(void);
void pll_reset(enum si5351_pll);
void set_ms_source(enum si5351_clock, enum si5351_pll);
void set_int(enum si5351_clock, uint8_t);
void set_clock_pwr(enum si5351_clock, uint8_t);
void set_clock_invert(enum si5351_clock, uint8_t);
void set_clock_source(enum si5351_clock, enum si5351_clock_source);
void set_clock_disable(enum si5351_clock, enum si5351_clock_disable);
void set_clock_fanout(enum si5351_clock_fanout, uint8_t);
void set_pll_input(enum si5351_pll, enum si5351_pll_input);
uint8_t si5351_write_bulk(uint8_t, uint8_t, uint8_t *);
uint8_t si5351_write(uint8_t, uint8_t);
uint8_t si5351_read(uint8_t);
struct Si5351Status dev_status;
struct Si5351IntStatus dev_int_status;
uint64_t plla_freq;
uint64_t pllb_freq;
uint64_t clk0_freq;
uint64_t clk1_freq;
uint64_t clk2_freq;
uint8_t clk0_int_mode, clk1_int_mode, clk2_int_mode;
private:
uint64_t pll_calc(uint64_t, struct Si5351RegSet *, int32_t);
uint64_t multisynth_calc(uint64_t, uint64_t, struct Si5351RegSet *);
void update_sys_status(struct Si5351Status *);
void update_int_status(struct Si5351IntStatus *);
void ms_div(enum si5351_clock, uint8_t, uint8_t);
uint8_t select_r_div(uint64_t *);
int32_t ref_correction;
uint8_t lock_plla, lock_pllb;
uint32_t xtal_freq;
};
#endif /* SI5351_H_ */