Complexity of the cc measurement function reduced by using an early return.

This commit is contained in:
klaute 2016-10-14 10:08:56 +02:00
부모 075c570cae
커밋 d12c75fa00
1개의 변경된 파일85개의 추가작업 그리고 87개의 파일을 삭제

파일 보기

@ -188,97 +188,95 @@ void cc_startMeasurement()
// MSG_TYPE_CONFIG
cc_getConfig();
// 2. start a for loop from the frequence to start to the end frequence
if (start_freq > 0 && start_freq <= 150000000 &&
end_freq > 0 && end_freq <= 150000000 &&
start_freq < end_freq &&
intervall > 0 &&
step_freq > 0)
if (start_freq == 0 || start_freq > 150000000 ||
end_freq == 0 || end_freq > 150000000 ||
step_freq == 0 || step_freq > 150000000 ||
start_freq >= end_freq ||
intervall == 0)
{
si5351.drive_strength(SI5351_CLK0, drive_str); // 2 4 6 8ma
uint8_t t = 0;
for (t = 0; t < 100; t++)
{
uint16_t tmp = analogRead(A0);
tmp = analogRead(A1);
}
uint32_t freq = 0;
for (freq = start_freq; freq <= end_freq; freq += step_freq)
{
if (freq > end_freq)
{
// prevent to step over the end frequency
// maybe the user is not allowed to send data in the frequency band
freq = end_freq;
}
uint32_t a0_sum = 0;
uint32_t a1_sum = 0;
uint16_t i = 0;
si5351.set_freq((uint64_t)freq * 100, SI5351_PLL_FIXED, SI5351_CLK0);
si5351.output_enable(SI5351_CLK0, 1); // enable clock output 0
delay(1);
for (i = 0; i < intervall; i++)
{
// 3. on every loop read the analog input A0 and A1 for the in intervall (milliseconds)
// and generate the average value, read the ADC value every milli second.
uint8_t t = 0;
uint16_t ta0 = 0;
uint16_t ta1 = 0;
for (t = 0; t < MEAS_LOOP_CNT; t++)
{
ta0 += analogRead(A0);
ta1 += analogRead(A1);
}
a0_sum += (ta0 / MEAS_LOOP_CNT);
a1_sum += (ta1 / MEAS_LOOP_CNT);
delay(1);
}
a0_sum = a0_sum / intervall;
a1_sum = a1_sum / intervall;
// 4. send the current output frequency, the drive strength and the measured ADC values from A0 and A1 to the host
// MSG_TYPE_MEAS_FREQ_INFO
sendSOM();
Serial.write(MSG_TYPE_MEAS_FREQ_INFO);
Serial.write((uint8_t)((freq & 0xff000000) >> 24));
Serial.write((uint8_t)((freq & 0x00ff0000) >> 16));
Serial.write((uint8_t)((freq & 0x0000ff00) >> 8));
Serial.write((uint8_t) (freq & 0x000000ff));
Serial.write((uint8_t)((a0_sum & 0xff00) >> 8));
Serial.write((uint8_t) (a0_sum & 0x00ff));
Serial.write((uint8_t)((a1_sum & 0xff00) >> 8));
Serial.write((uint8_t) (a1_sum & 0x00ff));
sendEOM();
si5351.output_enable(SI5351_CLK0, 0); // disable clock output 0
if (freq >= end_freq)
break; // abort the loop because all is done
}
// 5. send a measurement end message to the host
// MSG_TYPE_MEAS_END_INFO
char* tmp = " ";
sprintf(tmp, "%c%c%c%c%c", MSG_SOM1, MSG_SOM2,
MSG_TYPE_MEAS_END_INFO,
MSG_EOM1, MSG_EOM2);
Serial.write(tmp);
} else {
// on error
char* tmp = " ";
sprintf(tmp, "%c%c%c%c%c", MSG_SOM1, MSG_SOM2,
MSG_TYPE_ANSWER_NOK,
MSG_EOM1, MSG_EOM2);
Serial.write(tmp);
sendSOM();
Serial.write(MSG_TYPE_ANSWER_NOK);
sendEOM();
return;
}
// 2. start a for loop from the frequence to start to the end frequence
si5351.drive_strength(SI5351_CLK0, drive_str); // 2 4 6 8ma
uint8_t t = 0;
for (t = 0; t < 100; t++)
{
uint16_t tmp = analogRead(A0);
tmp = analogRead(A1);
}
uint32_t freq = 0;
for (freq = start_freq; freq <= end_freq; freq += step_freq)
{
if (freq > end_freq)
{
// prevent to step over the end frequency
// maybe the user is not allowed to send data in the frequency band
freq = end_freq;
}
uint32_t a0_sum = 0;
uint32_t a1_sum = 0;
uint16_t i = 0;
si5351.set_freq((uint64_t)freq * 100, SI5351_PLL_FIXED, SI5351_CLK0);
si5351.output_enable(SI5351_CLK0, 1); // enable clock output 0
delay(1);
for (i = 0; i < intervall; i++)
{
// 3. on every loop read the analog input A0 and A1 for the in intervall (milliseconds)
// and generate the average value, read the ADC value every milli second.
uint8_t t = 0;
uint16_t ta0 = 0;
uint16_t ta1 = 0;
for (t = 0; t < MEAS_LOOP_CNT; t++)
{
ta0 += analogRead(A0);
ta1 += analogRead(A1);
}
a0_sum += (ta0 / MEAS_LOOP_CNT);
a1_sum += (ta1 / MEAS_LOOP_CNT);
delay(1);
}
a0_sum = a0_sum / intervall;
a1_sum = a1_sum / intervall;
// 4. send the current output frequency, the drive strength and the measured ADC values from A0 and A1 to the host
// MSG_TYPE_MEAS_FREQ_INFO
sendSOM();
Serial.write(MSG_TYPE_MEAS_FREQ_INFO);
Serial.write((uint8_t)((freq & 0xff000000) >> 24));
Serial.write((uint8_t)((freq & 0x00ff0000) >> 16));
Serial.write((uint8_t)((freq & 0x0000ff00) >> 8));
Serial.write((uint8_t) (freq & 0x000000ff));
Serial.write((uint8_t)((a0_sum & 0xff00) >> 8));
Serial.write((uint8_t) (a0_sum & 0x00ff));
Serial.write((uint8_t)((a1_sum & 0xff00) >> 8));
Serial.write((uint8_t) (a1_sum & 0x00ff));
sendEOM();
si5351.output_enable(SI5351_CLK0, 0); // disable clock output 0
if (freq >= end_freq)
break; // abort the loop because all is done
}
// 5. send a measurement end message to the host
// MSG_TYPE_MEAS_END_INFO
sendSOM();
Serial.write(MSG_TYPE_MEAS_END_INFO);
sendEOM();
si5351.output_enable(SI5351_CLK0, 0); // disable clock output 0
}