LED pin control macro and port config added. Some little bugfixes done.

firmware/globals.h

@@ -11,6 +11,13 @@
     #define MSG_TYPE_ANSWER_NOK 0x02
     #define MSG_TYPE_BAUDRATE   0x03
 
+/*****************************************************************************/
+
+    #define LED0_ON  PORTB &= ~(1 << PIN0);
+    #define LED0_OFF PORTB |=  (1 << PIN0);
+    #define LED1_ON  PORTB &= ~(1 << PIN1);
+    #define LED1_OFF PORTB |=  (1 << PIN1);
+
 /*****************************************************************************/
 
     #define EN_MUX_LINE0     \

firmware/main.c

@@ -78,16 +78,6 @@ int main(void)
 {
   SetupHardware();
 
-  eeprom_busy_wait();
-  baudrate = eeprom_read_dword(&eep_baudrate);
-
-  if (baudrate == 0xffffffff)
-  {
-    eeprom_busy_wait();
-    baudrate = 115200;
-    eeprom_write_dword(&eep_baudrate, baudrate);
-  }
-
   // initialize the command interpreter
   cc_init();
 
@@ -100,6 +90,8 @@ int main(void)
     CDC2_Task();
 
     USB_USBTask();
+
+    //uart_putc('1');
   }
 }
 
@@ -131,8 +123,24 @@ void SetupHardware(void)
   // set every pin to low
   EN_MUX_LINE0;
 
+  DDRB |= (1 << PIN0) | (1 << PIN1);
+
+  LED0_OFF;
+  LED1_OFF;
+
   /* UART Hardware Initialization */
+  eeprom_busy_wait();
+  baudrate = eeprom_read_dword(&eep_baudrate);
+
+  if (baudrate == 0xffffffff)
+  {
+    eeprom_busy_wait();
+    baudrate = 115200;
+    eeprom_write_dword(&eep_baudrate, baudrate);
+  }
+
   uart_init( UART_BAUD_SELECT(baudrate, F_CPU) );
+  sei();
 
   /* USB Hardware Initialization */
   USB_Init();
@@ -328,19 +336,27 @@ void CDC2_Task(void)
     }
   }
 
+  //return;
+
   //===========================================================================
   uint8_t outBuffer[OUTPUT_BUFFER_SIZE];
   // TODO read the USART data and send them to the host
   // Fill &Buffer with USART data or send the USART input buffer direct
   uint16_t cnt = 0;
-  uint8_t c = uart_getc();
+  int c = uart_getc();
   while (!(c & UART_NO_DATA) && cnt < OUTPUT_BUFFER_SIZE)
   {
+    //LED0_ON;
     outBuffer[cnt] = c;
     c = uart_getc();
     cnt++;
   }
 
+  /*
+  cnt = 1;
+  outBuffer[0] = '2';
+  */
+
   // send the data which was received from the uart connection
   if (cnt > 0)
   {