Fixed light power state in webinterface. Fixed PWM range. Added some output to show the eeprom values read o startup. Newline before several { fixed.

firmware/firmware.ino

@@ -9,8 +9,8 @@
 #include "config.h"
 
 //********* Config block *********//
-
-uint8_t pins[LIGHTS_COUNT] = { 12, 15, 13, 14 };
+// ch1, ch2, ch3, ch4
+uint8_t pins[LIGHTS_COUNT] = { 14, 12, 15, 13 };
 
 IPAddress strip_ip(192, 168, 0, 26);   // choose an unique IP Adress
 IPAddress gateway_ip(192, 168, 0, 1);  // Router IP
@@ -37,9 +37,9 @@ IPAddress dns(192, 168, 0, 1);
 
 // 10 bit PWM
 #define PWM_OFF 0                // 0V
-#define PWM_MIN 640              // 15V - minimum light amount (~1%)
+#define PWM_MIN 0                // 0V - minimum light amount (~1%)
 #define PWM_MAX 1023             // 24V - maximum light amount (100%)
-#define BRI_TO_PWM_FACTOR 1.506  // 24V-15V = 9V range; 9V ≙ 1024-640 = 384 counts; 384/255 counts =~ 1,506 counts
+#define BRI_TO_PWM_FACTOR 4.012  // 24V-15V = 24V range
 
 //********************************//
 
@@ -177,6 +177,7 @@ void read_eeprom_config()
     {
       light_state[light] = true;  // set the light state to on
     }
+    Serial.println("light[" + (String)light + "] = " + (String)light_state[light]);
   }
 
   uint8_t tmp = EEPROM.read(EEPROM_TIMING_CONTROL_ENABLED_ADDRESS);
@@ -195,23 +196,29 @@ void read_eeprom_config()
     tc_enabled = TIMING_CONTROL_DISABLED;
   }
 
-  if (EEPROM.read(EEPROM_LAST_STATE_STARTUP_ADDRESS) == 255) {
+  Serial.println("tc_enabled = " + (String)tc_enabled);
+
+  if (EEPROM.read(EEPROM_LAST_STATE_STARTUP_ADDRESS) == 255)
+  {
     // set the default value on uninitialized EEPROM
     EEPROM.write(EEPROM_LAST_STATE_STARTUP_ADDRESS, 0);
     EEPROM.commit();
   }
 
 #ifdef USE_STATIC_IP
-  if (EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS) == 255) {
+  if (EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS) == 255)
+  {
     EEPROM.write(EEPROM_DYNAMIC_IP_ADDRESS, 0);
     EEPROM.commit();
   }
 #else
-  if (EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS) == 255) {
+  if (EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS) == 255)
+  {
     EEPROM.write(EEPROM_DYNAMIC_IP_ADDRESS, 1);
     EEPROM.commit();
   }
 #endif
+
 }
 
 //********************************//
@@ -222,13 +229,15 @@ void setup()
 
   Serial.begin(SERIAL_BAUD_RATE);
 
-  if (EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS) == 0) {
+  if (EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS) == 0)
+  {
     WiFi.config(strip_ip, gateway_ip, subnet_mask, dns);
   }
 
   read_eeprom_config();
 
-  for (int j = 0; j < 200; j++) {
+  for (int j = 0; j < 200; j++)
+  {
     lightEngine();
   }
 
@@ -241,7 +250,8 @@ void setup()
   Serial.print("IP: ");
   Serial.println(myIP);
 
-  if (!light_state[0]) {
+  if (!light_state[0])
+  {
     // Show that we are connected
     analogWrite(pins[0], 100);
     delay(500);
@@ -269,7 +279,9 @@ void loop()
   server.handleClient();
   lightEngine();
 
-  if (tc_enabled == TIMING_CONTROL_ENABLED) {
+  if (tc_enabled == TIMING_CONTROL_ENABLED)
+  {
+    //Serial.println("tc_enabled = " + (String)tc_enabled);
     tc_update_loop();
   }
 }
@@ -287,7 +299,8 @@ void handleNotFound()
   message += server.args();
   message += "\n";
 
-  for (uint8_t i = 0; i < server.args(); i++) {
+  for (uint8_t i = 0; i < server.args(); i++)
+  {
     message += " " + server.argName(i) + ": " + server.arg(i) + "\n";
   }
   server.send(404, "text/plain", message);
@@ -299,7 +312,8 @@ void init_webserver()
 {
 
 #ifndef DISABLE_WEB_CONTROL
-  server.on("/state", HTTP_PUT, []() {  // HTTP PUT request used to set a new light state
+  server.on("/state", HTTP_PUT, []()
+  {  // HTTP PUT request used to set a new light state
     DynamicJsonDocument root(1024);
     DeserializationError error = deserializeJson(root, server.arg("plain"));
 
@@ -307,38 +321,46 @@ void init_webserver()
       server.send(404, "text/plain", "FAIL. " + server.arg("plain"));
     } else {
 
-      for (JsonPair state : root.as<JsonObject>()) {
+      for (JsonPair state : root.as<JsonObject>())
+      {
         const char* key = state.key().c_str();
         int light = atoi(key) - 1;
         JsonObject values = state.value();
         int transitiontime = 4;
 
         uint8_t tmp = EEPROM.read(EEPROM_LAST_STATE_STARTUP_ADDRESS);
-        if (values.containsKey("on")) {
-          if (values["on"]) {
+        if (values.containsKey("on"))
+        {
+          if (values["on"])
+          {
             light_state[light] = true;
-            if (tmp == LAST_STATE_STARTUP_LIGHT_LAST_STATE && EEPROM.read(EEPROM_LAST_STATE_ADDRESS + light) == LIGHT_STATE_OFF) {
+            if (tmp == LAST_STATE_STARTUP_LIGHT_LAST_STATE && EEPROM.read(EEPROM_LAST_STATE_ADDRESS + light) == LIGHT_STATE_OFF)
+            {
               EEPROM.write(EEPROM_LAST_STATE_ADDRESS + light, LIGHT_STATE_ON);
             }
           } else {
             light_state[light] = false;
-            if (tmp == LAST_STATE_STARTUP_LIGHT_LAST_STATE && EEPROM.read(EEPROM_LAST_STATE_ADDRESS + light) == LIGHT_STATE_ON) {
+            if (tmp == LAST_STATE_STARTUP_LIGHT_LAST_STATE && EEPROM.read(EEPROM_LAST_STATE_ADDRESS + light) == LIGHT_STATE_ON)
+            {
               EEPROM.write(EEPROM_LAST_STATE_ADDRESS + light, LIGHT_STATE_OFF);
             }
           }
         }
 
-        if (values.containsKey("bri")) {
+        if (values.containsKey("bri"))
+        {
           bri[light] = values["bri"];
         }
 
-        if (values.containsKey("bri_inc")) {
+        if (values.containsKey("bri_inc"))
+        {
           bri[light] += (int)values["bri_inc"];
           if (bri[light] > 255) bri[light] = 255;
           else if (bri[light] < 1) bri[light] = 1;
         }
 
-        if (values.containsKey("transitiontime")) {
+        if (values.containsKey("transitiontime"))
+        {
           transitiontime = values["transitiontime"];
         }
         process_lightdata(light, transitiontime);
@@ -349,7 +371,8 @@ void init_webserver()
     }
   });
 
-  server.on("/state", HTTP_GET, []() {  // HTTP GET request used to fetch current light state
+  server.on("/state", HTTP_GET, []()
+  {  // HTTP GET request used to fetch current light state
     uint8_t light = server.arg("light").toInt() - 1;
     DynamicJsonDocument root(1024);
     root["on"] = light_state[light];
@@ -361,7 +384,8 @@ void init_webserver()
     server.send(200, "text/plain", output);
   });
 
-  server.on("/detect", []() {  // HTTP GET request used to discover the light type
+  server.on("/detect", []()
+  {  // HTTP GET request used to discover the light type
     char macString[32] = { 0 };
     sprintf(macString, "%02X:%02X:%02X:%02X:%02X:%02X", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
     DynamicJsonDocument root(1024);
@@ -377,7 +401,8 @@ void init_webserver()
     server.send(200, "text/plain", output);
   });
 
-  server.on("/tc_data_blocks", []() {
+  server.on("/tc_data_blocks", []()
+  {
     String output = tc_getJsonData();
 
     server.send(200, "application/json", output);
@@ -385,24 +410,29 @@ void init_webserver()
 
 #endif  // DISABLE_WEB_CONTROL
 
-  server.on("/", []() {
+  server.on("/", []()
+  {
 
 #ifndef DISABLE_WEB_CONTROL
     static float transitiontime = 4.0;
 
-    if (server.hasArg("transition")) {
+    if (server.hasArg("transition"))
+    {
       transitiontime = server.arg("transition").toFloat();
     }
 
     // startup behavior switch handling
-    if (server.hasArg("startup")) {
+    if (server.hasArg("startup"))
+    {
       int startup = server.arg("startup").toInt();
-      if (EEPROM.read(EEPROM_LAST_STATE_STARTUP_ADDRESS) != startup) {
+      if (EEPROM.read(EEPROM_LAST_STATE_STARTUP_ADDRESS) != startup)
+      {
         EEPROM.write(EEPROM_LAST_STATE_STARTUP_ADDRESS, startup);
 
         for (uint8_t i = 0; i < LIGHTS_COUNT; i++) {
           uint8_t tmp = (light_state[i] == true ? LIGHT_STATE_ON : LIGHT_STATE_OFF);
-          if (EEPROM.read(EEPROM_LAST_STATE_ADDRESS + i) != tmp) {
+          if (EEPROM.read(EEPROM_LAST_STATE_ADDRESS + i) != tmp)
+          {
             EEPROM.write(EEPROM_LAST_STATE_ADDRESS + i, tmp);
           }
         }
@@ -415,10 +445,14 @@ void init_webserver()
 #endif  // DISABLE_WEB_CONTROL
 
     // timing controller switch handling
-    if (server.hasArg("tc")) {
-      if (server.arg("tc") == "true") {
-        if (tc_enabled == TIMING_CONTROL_DISABLED) {
-          if (EEPROM.read(EEPROM_TIMING_CONTROL_ENABLED_ADDRESS) != TIMING_CONTROL_ENABLED) {
+    if (server.hasArg("tc"))
+    {
+      if (server.arg("tc") == "true")
+      {
+        if (tc_enabled == TIMING_CONTROL_DISABLED)
+        {
+          if (EEPROM.read(EEPROM_TIMING_CONTROL_ENABLED_ADDRESS) != TIMING_CONTROL_ENABLED)
+          {
             tc_enabled = TIMING_CONTROL_ENABLED;
             EEPROM.write(EEPROM_TIMING_CONTROL_ENABLED_ADDRESS, TIMING_CONTROL_ENABLED);
             EEPROM.commit();
@@ -429,9 +463,11 @@ void init_webserver()
 
       } else {  // tc is set to false or something else
 
-        if (tc_enabled == TIMING_CONTROL_ENABLED) {
+        if (tc_enabled == TIMING_CONTROL_ENABLED)
+        {
           tc_enabled = TIMING_CONTROL_DISABLED;
-          if (EEPROM.read(EEPROM_TIMING_CONTROL_ENABLED_ADDRESS) != TIMING_CONTROL_DISABLED) {
+          if (EEPROM.read(EEPROM_TIMING_CONTROL_ENABLED_ADDRESS) != TIMING_CONTROL_DISABLED)
+          {
             EEPROM.write(EEPROM_TIMING_CONTROL_ENABLED_ADDRESS, TIMING_CONTROL_DISABLED);
             EEPROM.commit();
             Serial.print("Timing control = ");
@@ -468,7 +504,8 @@ void init_webserver()
     // process the received data for every light
     for (int light = 0; light < LIGHTS_COUNT; light++) {
 
-      if (server.hasArg("bri" + (String)light)) {
+      if (server.hasArg("bri" + (String)light))
+      {
         bri[light] = (int)server.arg("bri" + (String)light).toInt();
         Serial.print("Brightness ");
         Serial.print(light);
@@ -715,6 +752,7 @@ void init_webserver()
 
     http_content += "<script>"
                     "function loadData() {" // load tc data and generate graph
+                    "console.log('----> generate graph <----');"
                     "$.getJSON('/tc_data_blocks', function(data) {"
                     "var currenttime = [];"
                     "var time = [];"
@@ -785,8 +823,9 @@ void init_webserver()
                     "if (indexFloat > index) {"
                     "index = indexFloat;"
                     "}"
-                    "console.log(\">>>\" + index);"
+                    "console.log(\"index in graph >>>\" + index);"
 
+                    // TODO in array dynamisch erzeugt umschreiben
                     "var trace1 = {"
                     "x: time,"
                     "y: channel1,"
@@ -815,6 +854,7 @@ void init_webserver()
                     "type: 'scatter',"
                     "mode: 'lines+markers',"
                     "};"
+
                     "var layout = {"
                     "title: 'Timing Control Data Blocks',"
                     "xaxis: {"
@@ -838,12 +878,14 @@ void init_webserver()
                     "}"
                     "}]"
                     "};"
-                    "Plotly.newPlot('plot_chart', [trace1, trace2, trace3, trace4], layout);"
+                    "Plotly.newPlot('plot_chart', [trace1, trace2, trace3, trace4], layout);" // TODO array der traces dynamisch erzeugen
                     "});"
                     "}"
                     "setInterval(loadData, 10000);"
                     "loadData();"
+
                     "function updateLightState() {" // load the light data from server and set on state and brightness
+                    "console.log('----> setting bri and power switch <----');"
                     "for (let i = 1; i <= 4; i++) {"
                     "const lightURL = `http://192.168.0.26/state?light=${i}`;"
                     "fetch(lightURL)"
@@ -855,12 +897,15 @@ void init_webserver()
                     "const onLinkOff = document.getElementById(`on${i - 1}_off`);"
                     "briSlider.value = data.bri;"
                     "briSliderVal.innerHTML = (Math.round((data.bri * 100.0 / 255.0) * 100) / 100).toFixed(2);"
-                    "if (data.on == 'true') {"
-                    "onLinkOn.classList.remove('pure-button-primary');"
-                    "onLinkOff.classList.add('pure-button-primary');"
-                    "} else {"
+                    "console.log('data.on ' + i + ' = ' + data.on);"
+                    "if (data.on == true) {"
+                    //"console.log('true');"
                     "onLinkOn.classList.add('pure-button-primary');"
                     "onLinkOff.classList.remove('pure-button-primary');"
+                    "} else {"
+                    //"console.log('false');"
+                    "onLinkOn.classList.remove('pure-button-primary');"
+                    "onLinkOff.classList.add('pure-button-primary');"
                     "}"
                     "})"
                     ".catch(error => console.error(error));"
@@ -871,6 +916,7 @@ void init_webserver()
 
                     // show pwm values in webinterface
                     "function updatePWMValues() {"
+                    "console.log('----> setting pwm data <----');"
                     "for (let i = 0; i < " + (String)LIGHTS_COUNT + "; i++) {"
                     "const lightID = i + 1;"
                     "const pwmElement = document.getElementById(`light${i}_pwm`);"
@@ -880,7 +926,7 @@ void init_webserver()
                     "fetch(url)"
                     ".then(response => response.json())"
                     ".then(data => {"
-                    "const pwmValue = ((Math.round((data.curpwm - ((data.curpwm >= 640.0) ? 640.0 : 0)) / 383.0 * 100.0) * 100.0) / 100.0).toFixed(2);" // pwm as % 640 to 1023
+                    "const pwmValue = ((Math.round((data.curpwm - ((data.curpwm >= " + (String)PWM_MIN+ ") ? " + (String)PWM_MIN + " : 0)) / " + (String)PWM_MAX + " * 100.0) * 100.0) / 100.0).toFixed(2);" // pwm as % PWM_MIN to PWM_MAX
                     "console.log('curpwm[' + i + '] = ' + data.curpwm + ' = ' + pwmValue);"
                     "pwmElement.innerText = pwmValue.toString();"
                     "pwmElement.value = pwmValue;"

firmware/timing_control.ino

@@ -117,8 +117,11 @@ void tc_init()
     }
   }
 
+  if (tc_enabled == TIMING_CONTROL_ENABLED)
+  {
+    Serial.println("tc_enabled = " + (String)tc_enabled);
     tc_update_main();
-
+  }
 }
 
 //********************************//