44 lines
2.3 KiB
C
44 lines
2.3 KiB
C
|
|
#define VERSION_STR "2.0.0"
|
|
|
|
#define USE_STATIC_IP //! uncomment to enable Static IP Adress
|
|
|
|
#define SERIAL_BAUD_RATE 115200
|
|
|
|
#define LOCAL_TIMEZONE_STRING "CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00" // Berlin, Germany - https://sites.google.com/a/usapiens.com/opnode/time-zones
|
|
|
|
//#define DEVELOPMENT
|
|
|
|
#define LIGHT_NAME "Lumini/Lominie Pixie30/P30 light control" // default light name
|
|
#define LIGHT_NAME_DEV_POSTFIX " (DEV)"
|
|
|
|
#define LIGHTS_COUNT 4 // do not modify because luminie p30 only has 4 channel, never set above 80
|
|
|
|
#define EEPROM_LAST_STATE_STARTUP_ADDRESS 0 // startup behavior is used for all lights
|
|
#define EEPROM_SCENE_ADDRESS 1 // scene is used for all of the lights
|
|
#define EEPROM_TIMING_CONTROL_ENABLED_ADDRESS 2
|
|
#define EEPROM_DYNAMIC_IP_ADDRESS 3
|
|
#define EEPROM_LAST_STATE_ADDRESS 4 // the first "last state" information for the first light
|
|
#define EEPROM_TIMING_DATA_ADDRESS (EEPROM_LAST_STATE_ADDRESS + LIGHTS_COUNT) // Stored data date per light ELE_USED; HH; MM; CH1; CH2; CH3; CH4;
|
|
#define EEPROM_IP_ADDRESS (EEPROM_TIMING_DATA_ADDRESS + 60) // 10 blocks of 6 byte per timing control data block = 60 byte EEPROM space
|
|
#define EEPROM_GW_ADDRESS (EEPROM_IP_ADDRESS + 4) // step 4 byte further IP
|
|
#define EEPROM_NM_ADDRESS (EEPROM_GW_ADDRESS + 4) // step 4 byte further GW
|
|
#define EEPROM_DNS_ADDRESS (EEPROM_NM_ADDRESS + 4) // step 4 byte further NM
|
|
|
|
#define BRI_MOD_STEPS_PER_SEC 5 // 1000ms / 40ms delay in loop / 4 functions called separately by FSM => 6.25 calls of the tc update function per second maximum => 5 step should be ok
|
|
|
|
#define TIME_CHECK_INTERVAL_MS (60000UL) // 60 second interval
|
|
#define TIME_LIGHTENGINE_INTERVAL_MS (1000UL / BRI_MOD_STEPS_PER_SEC) // BRI_MOD_STEPS_PER_SEC steps per second to in-/decrease the brightness
|
|
|
|
#define MY_NTP_SERVER "de.pool.ntp.org"
|
|
|
|
// 10 bit PWM
|
|
#define PWM_FREQ (500UL)
|
|
#define PWM_OFF 0 // 0V
|
|
#define PWM_MIN 0 // 0V - minimum light amount (~1%)
|
|
#define PWM_MAX 255 // 24V - maximum light amount (100%)
|
|
#define BRI_TO_PWM_FACTOR 1.0 // 24V-0V = 24V range
|
|
|
|
#define PWM_TEST_INTERVA_MS 1000
|
|
#define TEST_PWM_CHG_CNT 1
|