lumini_p30_control/firmware/firmware.ino

283 lines
6.7 KiB
C++

//********************************//
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <ESP8266HTTPUpdateServer.h>
#include <ESP8266WebServer.h>
#include <WiFiManager.h>
#include <ArduinoJson.h>
#include <EEPROM.h>
#include <FS.h>
#include "config.h"
//********* preprocessor block *********//
#ifdef DEVELOPMENT
#define LIGHT_NAME "Dimmable Hue Light (DEV)"
#else
#define LIGHT_NAME LIGHT_NAME_STR
#endif
//********* Config block *********//
// blue, warmwhite, purple, white&red&green
// blau, schwarz, rot, weiß
// ch1, ch2, ch3, ch4
// D1, D2, D7, D5
uint8_t pins[LIGHTS_COUNT] = { 5, 4, 13, 14 };
#ifndef DEVELOPMENT
IPAddress strip_ip (192, 168, 0, 26); // choose an unique IP Adress
#endif
#ifdef DEVELOPMENT
IPAddress strip_ip (192, 168, 0, 27); // choose an unique IP Adress
#endif
IPAddress gateway_ip (192, 168, 0, 1); // Router IP
IPAddress subnet_mask(255, 255, 255, 0);
IPAddress dns (192, 168, 0, 1);
//********************************//
#define LIGHT_VERSION 2.1
#define LAST_STATE_STARTUP_LIGHT_LAST_STATE 0
#define LAST_STATE_STARTUP_LIGHT_ON_STATE 1
#define LAST_STATE_STARTUP_LIGHT_OFF_STATE 2
#define LIGHT_STATE_ON 1
#define LIGHT_STATE_OFF 0
#define TIMING_CONTROL_ENABLED 1
#define TIMING_CONTROL_DISABLED 0
#define SCENE_RELEAX 0
#define SCENE_BRIGHT 1
#define SCENE_NIGHTLY 2
//********************************//
uint8_t scene;
uint8_t tc_enabled;
uint8_t tc_enabled_old;
bool light_state[LIGHTS_COUNT];
bool in_transition;
int default_transitiontime = 4; // 4 = 4 seconds
uint16_t transitiontime[LIGHTS_COUNT];
uint16_t bri[LIGHTS_COUNT];
uint16_t current_pwm[LIGHTS_COUNT];
float step_level[LIGHTS_COUNT];
float current_bri[LIGHTS_COUNT];
byte mac[6];
ESP8266WebServer server(80);
ESP8266HTTPUpdateServer httpUpdateServer;
uint32_t last_lightengine_activity = 0;
//********************************//
void setup()
{
EEPROM.begin(256);
SPIFFS.begin();
Serial.begin(SERIAL_BAUD_RATE);
Serial.flush();
delay(1000);
//Serial.println("Flash size: " + (String)ESP.getFlashChipSize());
Dir dir = SPIFFS.openDir("/");
Serial.println("\n\nSPIFFS directory content:");
while (dir.next())
{
String fileName = dir.fileName();
size_t fileSize = dir.fileSize();
Serial.printf("Datei Name: %s, Größe: %s\n", fileName.c_str(), formatBytes(fileSize).c_str());
}
if (EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS) == 0)
{
WiFi.config(strip_ip, gateway_ip, subnet_mask, dns);
}
read_eeprom_config();
for (int j = 0; j < 200; j++)
{
lightEngine();
}
WiFi.mode(WIFI_STA);
WiFiManager wifiManager;
wifiManager.setConfigPortalTimeout(120);
wifiManager.autoConnect(LIGHT_NAME);
IPAddress myIP = WiFi.localIP();
Serial.print("IP: ");
Serial.println(myIP);
analogWriteFreq(PWM_FREQ);
if (!light_state[0])
{
// Show that we are connected
analogWrite(pins[0], 100);
delay(500);
analogWrite(pins[0], 0);
}
WiFi.macAddress(mac);
pinMode(LED_BUILTIN, OUTPUT); // Initialize the LED_BUILTIN pin as an output
digitalWrite(LED_BUILTIN, HIGH); // Turn the LED off by making the voltage HIGH
httpUpdateServer.setup(&server); // start http server
init_webserver();
Serial.println("Init timinc control");
tc_init();
Serial.println("Starting webserver");
server.begin();
} // end of setup
//********************************//
void loop()
{
static uint8_t state = 0;
switch (state)
{
case 0:
server.handleClient();
state = 1;
ESP.wdtFeed();
break;
case 1:
lightEngine();
state = 2;
ESP.wdtFeed();
case 2:
tc_update_loop();
state = 3;
ESP.wdtFeed();
break;
case 3:
test_pwm_main();
state = 0;
ESP.wdtFeed();
break;
default:
state = 0;
}
delay(10);
}
//********************************//
void read_eeprom_config()
{
// -------------------- //
uint8_t tmp = EEPROM.read(EEPROM_TIMING_CONTROL_ENABLED_ADDRESS);
if (tmp == TIMING_CONTROL_DISABLED)
{
tc_enabled = TIMING_CONTROL_DISABLED;
} else if (tmp == TIMING_CONTROL_ENABLED)
{
tc_enabled = TIMING_CONTROL_ENABLED;
} else {
// Write default value
EEPROM.write(EEPROM_TIMING_CONTROL_ENABLED_ADDRESS, TIMING_CONTROL_DISABLED);
EEPROM.commit();
tc_enabled = TIMING_CONTROL_DISABLED;
Serial.println("Written default timing control config to EEPROM (disabled)");
}
Serial.println("Timing Control status: " + (String)tc_enabled);
// -------------------- //
if (EEPROM.read(EEPROM_LAST_STATE_STARTUP_ADDRESS) > 2)
{
// set the default value on uninitialized EEPROM
EEPROM.write(EEPROM_LAST_STATE_STARTUP_ADDRESS, 0);
EEPROM.commit();
Serial.println("Written default 'last state' config to EEPROM");
}
Serial.println("Last state startup setting: " + (String)EEPROM.read(EEPROM_LAST_STATE_STARTUP_ADDRESS));
if (EEPROM.read(EEPROM_SCENE_ADDRESS) > 2)
{
// set the default value on uninitialized EEPROM
EEPROM.write(EEPROM_SCENE_ADDRESS, 0);
EEPROM.commit();
Serial.println("Written default scene config to EEPROM");
}
Serial.println("Scene setting: " + (String)EEPROM.read(EEPROM_SCENE_ADDRESS));
// -------------------- //
#ifdef USE_STATIC_IP
if (EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS) > 1)
{
EEPROM.write(EEPROM_DYNAMIC_IP_ADDRESS, 0);
EEPROM.commit();
Serial.println("Written default dynamic IP setting (disabled) to EEPROM");
}
#else
if (EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS) > 1)
{
EEPROM.write(EEPROM_DYNAMIC_IP_ADDRESS, 1);
EEPROM.commit();
Serial.println("Written default dynamic IP setting (enabled) to EEPROM");
}
#endif
Serial.println("Dynamic IP setting: " + (String)EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS));
// -------------------- //
for (uint8_t light = 0; light < LIGHTS_COUNT; light++)
{
apply_scene(EEPROM.read(EEPROM_SCENE_ADDRESS), light);
step_level[light] = bri[light] / 150.0;
if (EEPROM.read(EEPROM_LAST_STATE_STARTUP_ADDRESS) == LAST_STATE_STARTUP_LIGHT_LAST_STATE ||
(EEPROM.read(EEPROM_LAST_STATE_STARTUP_ADDRESS) == LAST_STATE_STARTUP_LIGHT_ON_STATE &&
EEPROM.read(EEPROM_LAST_STATE_ADDRESS + light) == LIGHT_STATE_ON))
{
light_state[light] = true; // set the light state to on
}
Serial.println("light[" + (String)light + "] = " + (String)light_state[light]);
}
}
//********************************//
String formatBytes(size_t bytes)
{
if (bytes < 1024)
{
return String(bytes) + " B";
} else if (bytes < (1024 * 1024))
{
return String(bytes / 1024.0) + " KB";
} else if (bytes < (1024 * 1024 * 1024))
{
return String(bytes / 1024.0 / 1024.0) + " MB";
} else {
return String(bytes / 1024.0 / 1024.0 / 1024.0) + " GB";
}
}
//********************************//