uvk5-cec-chirp-driver/README.md

A CHIRP driver which supports the HF firmware from KD8CEC.

http://www.hamskey.com/2024/04/introduction-to-uv-k5-hf-05-fullband.html#more
https://github.com/phdlee/uvk5cec

Starting with firmware version 0.5 HF.

The base of the chirp driver is based on https://www.universirius.com/preppers/quansheng-uv-k5-manuale-del-firmware-ijv_2-9r5/#Firmware-IJV

## EEPROM content for 0.5 HF:

Address: 0x0D60  
Content:  
for(uint16_t i = 0; i < sizeof(MR_ChannelAttributes); i++) { ChannelAttributes_t *att = &MR_ChannelAttributes[i]; if(att->__val == 0xff){ att->__val = 0; att->band = 0xf; } }  

Address: 0x0E70  
Content:  
0: CHAN_1_CALL  
1: SQUELCH_LEVEL  
2: TX_TIMEOUT_TIMER  
3: NOAA_AUTO_SCAN  
4: KEY_LOCK  
5: VOX_SWITCH  
6: VOX_LEVEL  
7: MIC_SENSITIVITY  

Address: 0x0E78  
Content:  
0: BACKLIGHT_MAX (0x0f) & BACKLIGHT_MIN (0xf0 >> 4)
1: CHANNEL_DISPLAY_MODE  
2: CROSS_BAND_RX_TX  
3: BATTERY_SAVE  
4: DUAL_WATCH  
5: BACKLIGHT_TIME  
6: TAIL_TONE_ELIMINATION  
7: VFO_OPEN  

Address: 0x0E80  
Content:  
0: ScreenChannel[0]  
1: ScreenChannel[1]  
2: MrChannel[0]  
3: MrChannel[1]  
4: FreqChannel[0]  
5: FreqChannel[1]  
6: NoaaChannel[0]  
7: NoaaChannel[1]  

Address: 0x0E90  
Content:  
0: BEEP_CONTROL (0x01) & KEY_M_LONG_PRESS_ACTION (>> 1)
1: KEY_1_SHORT_PRESS_ACTION  
2: KEY_1_LONG_PRESS_ACTION  
3: KEY_2_SHORT_PRESS_ACTION  
4: KEY_2_LONG_PRESS_ACTION  
5: SCAN_RESUME_MODE  
6: AUTO_KEYPAD_LOCK  
7: POWER_ON_DISPLAY_MODE  

Address: 0x0E98  
Content:  
0: memcpy(&POWER_ON_PASSWORD, Data, 4)  

Address: 0x0EA0  
Content:  
0: VOICE_PROMPT  
1: S0_LEVEL  
2: S9_LEVEL  

Address: 0x0EA8  
Content:  
0: ALARM_MODE  
1: ROGER  
2: REPEATER_TAIL_TONE_ELIMINATION  
3: TX_VFO  
4: BATTERY_TYPE  

Address: 0x0EB0
Content:
EEPROM_WELCOMESTRING1 (16 byte)
EEPROM_WELCOMESTRING2 (16 byte)

Address: 0x0ED0  
Content:  
0: DTMF_SIDE_TONE  
1: DTMF_SEPARATE_CODE  
2: DTMF_GROUP_CALL_CODE  
3: DTMF_DECODE_RESPONSE  
4: DTMF_auto_reset_time  
5: DTMF_PRELOAD_TIME  
6: DTMF_FIRST_CODE_PERSIST_TIME  
7: DTMF_HASH_CODE_PERSIST_TIME  

Address: 0x0ED8  
Content:  
0: DTMF_CODE_PERSIST_TIME  
1: DTMF_CODE_INTERVAL_TIME  
2: PERMIT_REMOTE_KILL  

Address: 0x0EE0  
Content:  
0: memcpy(ANI_DTMF_ID, Data, sizeof(ANI_DTMF_ID))  

Address: 0x0EE8  
Content:  
0: memcpy(KILL_CODE, Data, sizeof(KILL_CODE))  

Address: 0x0EF0  
Content:  
0: memcpy(REVIVE_CODE, Data, sizeof(REVIVE_CODE))  

Address: 0x0EF8  
Content:  
0: memcpy(DTMF_UP_CODE, Data, sizeof(DTMF_UP_CODE))  

Address: 0x0F08  
Content:  
0: memcpy(DTMF_DOWN_CODE, Data, sizeof(DTMF_DOWN_CODE))  

Address: 0x0F18  
Content:  
0: SCAN_LIST_DEFAULT  
1: SCAN_LIST_ENABLED[0]  
2: SCANLIST_PRIORITY_CH1[0]  
3: SCANLIST_PRIORITY_CH2[0]  
4: SCAN_LIST_ENABLED[1]  
5: SCANLIST_PRIORITY_CH1[1]  
6: SCANLIST_PRIORITY_CH2[1]  

Address: 0x0F30  
Content:  
bHasCustomAesKey: true/false  

Address: 0x0F40  
Content:  
0: F_LOCK  
1: 350TX  
2: KILLED  
3: 200TX  
4: 500TX  
5: 350EN  
6: ScrambleEnable  
7: live_DTMF_decoder  

Address: CEC_EEPROM_START1 = 0x1D50
Content:  
LiveSeekMode  
CW_KEYTYPE  
CW_SPEED  
CW_TONE