Output hexdump file will be stored into the /tmp folder now.

README.md

@@ -9,142 +9,142 @@ The base of the chirp driver is based on https://www.universirius.com/preppers/q
 
 ## EEPROM content for 0.5 HF:
 
-Address: 0x0D60  
-Content:  
-for(uint16_t i = 0; i < sizeof(MR_ChannelAttributes); i++) { ChannelAttributes_t *att = &MR_ChannelAttributes[i]; if(att->__val == 0xff){ att->__val = 0; att->band = 0xf; } }  
+Address: 0x0D60
+Content:
+for(uint16_t i = 0; i < sizeof(MR_ChannelAttributes); i++) { ChannelAttributes_t *att = &MR_ChannelAttributes[i]; if(att->__val == 0xff){ att->__val = 0; att->band = 0xf; } }
 
-Address: 0x0E70  
-Content:  
-0: CHAN_1_CALL  
-1: SQUELCH_LEVEL  
-2: TX_TIMEOUT_TIMER  
-3: NOAA_AUTO_SCAN  
-4: KEY_LOCK  
-5: VOX_SWITCH  
-6: VOX_LEVEL  
-7: MIC_SENSITIVITY  
+Address: 0x0E70
+Content:
+0: CHAN_1_CALL
+1: SQUELCH_LEVEL
+2: TX_TIMEOUT_TIMER
+3: NOAA_AUTO_SCAN
+4: KEY_LOCK
+5: VOX_SWITCH
+6: VOX_LEVEL
+7: MIC_SENSITIVITY
 
-Address: 0x0E78  
-Content:  
+Address: 0x0E78
+Content:
 0: BACKLIGHT_MAX (0x0f) & BACKLIGHT_MIN (0xf0 >> 4)
-1: CHANNEL_DISPLAY_MODE  
-2: CROSS_BAND_RX_TX  
-3: BATTERY_SAVE  
-4: DUAL_WATCH  
-5: BACKLIGHT_TIME  
-6: TAIL_TONE_ELIMINATION  
-7: VFO_OPEN  
+1: CHANNEL_DISPLAY_MODE
+2: CROSS_BAND_RX_TX
+3: BATTERY_SAVE
+4: DUAL_WATCH
+5: BACKLIGHT_TIME
+6: TAIL_TONE_ELIMINATION
+7: VFO_OPEN
 
-Address: 0x0E80  
-Content:  
-0: ScreenChannel[0]  
-1: ScreenChannel[1]  
-2: MrChannel[0]  
-3: MrChannel[1]  
-4: FreqChannel[0]  
-5: FreqChannel[1]  
-6: NoaaChannel[0]  
-7: NoaaChannel[1]  
+Address: 0x0E80
+Content:
+0: ScreenChannel[0]
+1: ScreenChannel[1]
+2: MrChannel[0]
+3: MrChannel[1]
+4: FreqChannel[0]
+5: FreqChannel[1]
+6: NoaaChannel[0]
+7: NoaaChannel[1]
 
-Address: 0x0E90  
-Content:  
+Address: 0x0E90
+Content:
 0: BEEP_CONTROL (0x01) & KEY_M_LONG_PRESS_ACTION (>> 1)
-1: KEY_1_SHORT_PRESS_ACTION  
-2: KEY_1_LONG_PRESS_ACTION  
-3: KEY_2_SHORT_PRESS_ACTION  
-4: KEY_2_LONG_PRESS_ACTION  
-5: SCAN_RESUME_MODE  
-6: AUTO_KEYPAD_LOCK  
-7: POWER_ON_DISPLAY_MODE  
+1: KEY_1_SHORT_PRESS_ACTION
+2: KEY_1_LONG_PRESS_ACTION
+3: KEY_2_SHORT_PRESS_ACTION
+4: KEY_2_LONG_PRESS_ACTION
+5: SCAN_RESUME_MODE
+6: AUTO_KEYPAD_LOCK
+7: POWER_ON_DISPLAY_MODE
 
-Address: 0x0E98  
-Content:  
-0: memcpy(&POWER_ON_PASSWORD, Data, 4)  
+Address: 0x0E98
+Content:
+0: memcpy(&POWER_ON_PASSWORD, Data, 4)
 
-Address: 0x0EA0  
-Content:  
-0: VOICE_PROMPT  
-1: S0_LEVEL  
-2: S9_LEVEL  
+Address: 0x0EA0
+Content:
+0: VOICE_PROMPT
+1: S0_LEVEL
+2: S9_LEVEL
 
-Address: 0x0EA8  
-Content:  
-0: ALARM_MODE  
-1: ROGER  
-2: REPEATER_TAIL_TONE_ELIMINATION  
-3: TX_VFO  
-4: BATTERY_TYPE  
+Address: 0x0EA8
+Content:
+0: ALARM_MODE
+1: ROGER
+2: REPEATER_TAIL_TONE_ELIMINATION
+3: TX_VFO
+4: BATTERY_TYPE
 
 Address: 0x0EB0
 Content:
 EEPROM_WELCOMESTRING1 (16 byte)
 EEPROM_WELCOMESTRING2 (16 byte)
 
-Address: 0x0ED0  
-Content:  
-0: DTMF_SIDE_TONE  
-1: DTMF_SEPARATE_CODE  
-2: DTMF_GROUP_CALL_CODE  
-3: DTMF_DECODE_RESPONSE  
-4: DTMF_auto_reset_time  
-5: DTMF_PRELOAD_TIME  
-6: DTMF_FIRST_CODE_PERSIST_TIME  
-7: DTMF_HASH_CODE_PERSIST_TIME  
+Address: 0x0ED0
+Content:
+0: DTMF_SIDE_TONE
+1: DTMF_SEPARATE_CODE
+2: DTMF_GROUP_CALL_CODE
+3: DTMF_DECODE_RESPONSE
+4: DTMF_auto_reset_time
+5: DTMF_PRELOAD_TIME
+6: DTMF_FIRST_CODE_PERSIST_TIME
+7: DTMF_HASH_CODE_PERSIST_TIME
 
-Address: 0x0ED8  
-Content:  
-0: DTMF_CODE_PERSIST_TIME  
-1: DTMF_CODE_INTERVAL_TIME  
-2: PERMIT_REMOTE_KILL  
+Address: 0x0ED8
+Content:
+0: DTMF_CODE_PERSIST_TIME
+1: DTMF_CODE_INTERVAL_TIME
+2: PERMIT_REMOTE_KILL
 
-Address: 0x0EE0  
-Content:  
-0: memcpy(ANI_DTMF_ID, Data, sizeof(ANI_DTMF_ID))  
+Address: 0x0EE0
+Content:
+0: memcpy(ANI_DTMF_ID, Data, sizeof(ANI_DTMF_ID))
 
-Address: 0x0EE8  
-Content:  
-0: memcpy(KILL_CODE, Data, sizeof(KILL_CODE))  
+Address: 0x0EE8
+Content:
+0: memcpy(KILL_CODE, Data, sizeof(KILL_CODE))
 
-Address: 0x0EF0  
-Content:  
-0: memcpy(REVIVE_CODE, Data, sizeof(REVIVE_CODE))  
+Address: 0x0EF0
+Content:
+0: memcpy(REVIVE_CODE, Data, sizeof(REVIVE_CODE))
 
-Address: 0x0EF8  
-Content:  
-0: memcpy(DTMF_UP_CODE, Data, sizeof(DTMF_UP_CODE))  
+Address: 0x0EF8
+Content:
+0: memcpy(DTMF_UP_CODE, Data, sizeof(DTMF_UP_CODE))
 
-Address: 0x0F08  
-Content:  
-0: memcpy(DTMF_DOWN_CODE, Data, sizeof(DTMF_DOWN_CODE))  
+Address: 0x0F08
+Content:
+0: memcpy(DTMF_DOWN_CODE, Data, sizeof(DTMF_DOWN_CODE))
 
-Address: 0x0F18  
-Content:  
-0: SCAN_LIST_DEFAULT  
-1: SCAN_LIST_ENABLED[0]  
-2: SCANLIST_PRIORITY_CH1[0]  
-3: SCANLIST_PRIORITY_CH2[0]  
-4: SCAN_LIST_ENABLED[1]  
-5: SCANLIST_PRIORITY_CH1[1]  
-6: SCANLIST_PRIORITY_CH2[1]  
+Address: 0x0F18
+Content:
+0: SCAN_LIST_DEFAULT
+1: SCAN_LIST_ENABLED_1
+2: SCANLIST_PRIORITY_CH1_1
+3: SCANLIST_PRIORITY_CH2_1
+4: SCAN_LIST_ENABLED_2
+5: SCANLIST_PRIORITY_CH1_2
+6: SCANLIST_PRIORITY_CH2_2
 
-Address: 0x0F30  
-Content:  
-bHasCustomAesKey: true/false  
+Address: 0x0F30
+Content:
+bHasCustomAesKey: true/false
 
-Address: 0x0F40  
-Content:  
-0: F_LOCK  
-1: 350TX  
-2: KILLED  
-3: 200TX  
-4: 500TX  
-5: 350EN  
-6: ScrambleEnable  
-7: live_DTMF_decoder  
+Address: 0x0F40
+Content:
+0: F_LOCK
+1: 350TX
+2: KILLED
+3: 200TX
+4: 500TX
+5: 350EN
+6: ScrambleEnable
+7: live_DTMF_decoder
 
 Address: CEC_EEPROM_START1 = 0x1D50
-Content:  
-LiveSeekMode  
-CW_KEYTYPE  
-CW_SPEED  
-CW_TONE  
+Content:
+LiveSeekMode
+CW_KEYTYPE
+CW_SPEED
+CW_TONE

uvk5_CEC_05_HF_DO4KLA.py

@@ -630,7 +630,7 @@ def do_download(radio):
 
     if DEBUG_WRITE_RADIO_HEXDUMP:
         hex_data = _convert_to_intel_hex(eeprom)
-        _save_to_hex_file(hex_data, "radio_dump.hex")
+        _save_to_hex_file(hex_data, "/tmp/radio_dump.hex")
 
     return memmap.MemoryMapBytes(eeprom)