weatherstation/firmware/config_user.h.example

// Copy this file to config_user.h and adjust it to your needs.

#ifndef __CONFIG_USER_H__
#define __CONFIG_USER_H__

// Debug output on the serial console
#define DEBUG

// Device name
// WARNING: Keep the name short! If your access point did not show up, you
// maybe have a TOO LONG SSID!
String DEVICE_NAME = "weatherstation";

/********************************************************************************/

// Enable/Disable general features
#define BATTERY_POWERED

// retries to connect after 5 seconds or starts the wifimanager
//#define SLEEP_IF_NO_WLAN_CONNECTION

#define INFLUXDB_FEATURE
#define INFLUXDB_VERSION 1 // 1 or 2
//#define LOG_MILLIS_TO_INFLUXDB

//#define SERIAL_FEATURE

#define SENSOR_WIND
#define SENSOR_APDS9960
//#define SENSOR_APDS9930
#define SENSOR_BME280
//#define SENSOR_BMP280
#define SENSOR_BATTERY

//#define BAT_PINS_D34

/********************************************************************************/
// not available or recommended for battery mode
/********************************************************************************/

//#define DISABLE_WIFIMANAGER
// Restarts the firmware every n seconds
//#define RESET_ESP_TIME_INTERVAL
//#define ENABLE_WATCHDOG
//#define WEBUPDATER_FEATURE
// only available in case that webupdater is enabled
//#define USE_LOGGER
// only possible if webupdater is also enabled
//#define HOMEBRIDGE_WEBSTAT
// for debugging windspeed measurement only, trigger and results are handled by webupdater
//#define DEBUG_WINDSPEED_MEASUREMENT
//#define HTTP_CALL_ON_WINDSPEED_EXCEED
//#define HTTP_CALL_SEND_JSON_DATA
//#define SHOW_SENSOR_DATA_ON_WEBUPDATER_MAIN_PAGE

/********************************************************************************/

// measurement correction factors
const float HUMIDITY_FACTOR = 1.0;
const float LIGHT_FACTOR    = 1.0;
const float TEMP_FACTOR     = 1.0;

/********************************************************************************/


// InfluxDB1 credentials
const char     *INFLUXDB_HOST = "hostname";
const uint16_t  INFLUXDB_PORT = 80;
const char     *INFLUXDB_DB   = "database";
const char     *INFLUXDB_USER = "user";
const char     *INFLUXDB_PASS = "password";

// InfluxDB2 credentials
/*
const char *INFLUXDB_URL    = "http://192.168.0.123:3124";
const char *INFLUXDB_ORG    = "home_org";
const char *INFLUXDB_BUCKET = "mybucket";
const char *INFLUXDB_TOKEN  = "your api token";

/********************************************************************************/

// enable HTTP_CALL_ON_WINDSPEED_EXCEED to enable this feature
#define HTTP_CALL_ON_WINDSPEED_EXCEED_MPS  5.0 // 5.0 m/s == 18 km/h
#define HTTP_CALL_ON_WINDSPEED_INTERVAL_S   60 // it's required to be bigger than WIND_SENSOR_MEAS_TIME_S
#define HTTP_CALL_ON_WINDSPEED_URL         "http://192.168.178.100:3001/button-windspeedexceed?event=click"

#define HTTP_CALL_SEND_JSON_DATA_INTERVAL_S 300
#define HTTP_CALL_SEND_JSON_DATA_URL        "http://192.168.178.123:80/html/index.html?json_weather_data="

// anemometer settings
// thingiverse anemometer settings: https://www.thingiverse.com/thing:2559929/files
#define ROTOR_LENGTH_CM                             8.25
#define ROTOR_LENGTH_M          (ROTOR_LENGTH_CM / 100.0)
//#define ROTOR_LENGTH_KM       (ROTOR_LENGTH_M / 1000.0) // configuration example for generalization
//#define SEC_TO_HOUR_FACTOR                (60.0 * 60.0) // configuration example for generalization
#define MPS_CORRECT_FACT                            9.28
//#define COUNT_TO_KMH          ((TWO_PI * ROTOR_LENGTH_KM / WIND_SENSOR_MEAS_TIME_S) * SEC_TO_HOUR_FACTOR) // configuration exampe for generalization
#define COUNT_TO_MPS             (TWO_PI * ROTOR_LENGTH_M  / WIND_SENSOR_MEAS_TIME_S)
// only this define is used for calculation, all other before are only used to describe the math v_wind = correction_factor * rotations * 2 * pi * radius / time_of_measurement_in_sec
// and if required the result has t be multiplied by another factor to convert it from m/s
#define WINDSPEED_FACTOR         (COUNT_TO_MPS * MPS_CORRECT_FACT)

// china aliexpress anemometer settings (calculation unknown) <add link here>
//#define WINDSPEED_FACTOR 2.4

/********************************************************************************/

#ifdef DISABLE_WIFIMANAGER
  // Set your Static IP address
  IPAddress local_IP(192, 168, 178, 123);
  // Set your Gateway IP address
  IPAddress gateway(192, 168, 178, 1);
  // Set subnet mask
  IPAddress subnet(255, 255, 255, 0);

  #define WIFI_SSID   "myWifi"         // WLAN Netzwerk
  #define WIFI_PASSWD "myPass"   // WLAN Passwort
#endif

/********************************************************************************/

#endif