Moved Homebridge webstat to webUpdater logic. Fixed Windspeed calculation. Added a interval firmware reset functionality.

firmware/config.h

@@ -24,6 +24,13 @@
 #define POWERSAVING_SLEEP_S             600
 #define EMERGENCY_SLEEP_S            172800 // Sleep for 2 days to recover
 #define ENERGY_SAVING_ITERATIONS         30
+#define WIFI_MINIMUM_SIGNAL_QUALITY      10 // percent
+#define RESET_ESP_TIME_INTERVAL_MS  3600000
+
+#define ROTOR_LENGTH_KM              0.000105
+#define WIND_SENSOR_MEAS_TIME_S           5.0
+#define SEC_TO_HOUR_FACTOR      (60.0 * 60.0)
+#define COUNT_TO_KMH            ((TWO_PI * ROTOR_LENGTH_KM /  WIND_SENSOR_MEAS_TIME_S) * SEC_TO_HOUR_FACTOR)
 
 #define BAT_LOW_VOLTAGE                 3.6
 #define BAT_EMERGENCY_DEEPSLEEP_VOLTAGE 3.5
@@ -48,5 +55,6 @@
 #define BME_ADDRESS 0x76
 
 #define INITIAL_WEBSERVER_TIME   20
+#define WEB_UPDATER_HTTP_PORT  8080
 
 #endif

firmware/firmware.ino

@@ -26,14 +26,15 @@ WiFiManager wifiManager;
 
 //*************************************************************************//
 
-void debug(String x) {
+void debug(String x)
+{
 #ifdef DEBUG
   Serial.println(x);
 #endif
 }
 
-
-void setup() {
+void setup()
+{
 
 #if defined(DEBUG) || defined(SERIAL_FEATURE)
   Serial.begin(115200);
@@ -60,16 +61,29 @@ void setup() {
   // Establish WiFi connection
   String wifiName = "oko-weather-" + DEVICE_NAME;
 
-  wifiManager.setMinimumSignalQuality(16);
-  wifiManager.setConnectTimeout(WIFI_AUTOCONNECT_TIMEOUT_S); // the time in seconds to wait for the known wifi connection
-  wifiManager.setTimeout(WIFI_CONFIG_PORTAL_TIMEOUT_S); // the time in seconds to wait for the user to configure the device
+  wifiManager.setMinimumSignalQuality(WIFI_MINIMUM_SIGNAL_QUALITY);
+  // the time in seconds to wait for the known wifi connection
+  wifiManager.setConnectTimeout(WIFI_AUTOCONNECT_TIMEOUT_S);
+  // the time in seconds to wait for the user to configure the device
+  wifiManager.setTimeout(WIFI_CONFIG_PORTAL_TIMEOUT_S);
 
-  while (!wifiManager.autoConnect(wifiName.c_str(), "DEADBEEF"))
+#ifdef SLEEP_IF_NO_WLAN_CONNECTION
+  while
+#endif
+#ifndef SLEEP_IF_NO_WLAN_CONNECTION
+  if
+#endif
+        (!wifiManager.autoConnect(wifiName.c_str(), "DEADBEEF"))
   {
     debug("WiFi connection failed, try again in 5 seconds...");
     // If autoconnect to WLAN failed and no client connected, go to deep sleep
-    //ESP.deepSleep(POWERSAVING_SLEEP_S * 1000000, WAKE_RF_DEFAULT);
+#ifdef SLEEP_IF_NO_WLAN_CONNECTION
+    ESP.deepSleep(POWERSAVING_SLEEP_S * 1000000, WAKE_RF_DEFAULT);
+    delay(100);
+#endif
+#ifndef SLEEP_IF_NO_WLAN_CONNECTION
     delay(5000);
+#endif
   }
 
   debug("Connected!");
@@ -125,6 +139,15 @@ void setup() {
   //It's magic! leave in
   delay(100);
 
+#ifdef RESET_ESP_TIMEINTERVAL
+  // if millis() reached interval (1h) restart ESP
+  if (millis() >= RESET_ESP_TIME_INTERVAL_MS)
+  {
+    // TODO test
+    ESP.restart();
+  }
+#endif
+
 #ifdef BATTERY_POWERED
   debug("battery powered");
   _loop();

firmware/hb_webstat_srv.ino

@@ -1,30 +0,0 @@
-
-// Port des Web Servers auf 80 setzen
-
-#ifdef HOMEBRIDGE_WEBSTAT
-
-WiFiServer hb_webstat_server(80);
-
-const char *hb_ws_msg_start = "{\"temperature\": ";
-const char *hb_ws_msg_mid   = "\"humidity\": ";
-const char *hb_ws_msg_end   = "}";
-
-void hb_webstat_setup()
-{
-	hb_webstat_server.begin()
-}
-
-void hb_webstat_send(floar currentSensorDfloar currentSensorData[]ata[])
-{
-	WiFiClient client = server.available();
-
-	if (client.available()) {
-		client.print(hb_ws_msg_start);
-		client.print(String(currentSensorData[0],2));
-		client.print(hb_ws_msg_mid);
-		client.print(hb_ws_msg_end);
-	}
-}
-
-#endif
-      

firmware/influxdb.ino

@@ -1,7 +1,9 @@
 #include <InfluxDbClient.h> // from bib manager
 
+#include "config_user.h"
+
 // Data point
-Point sensor("weatherstation");
+Point sensor(DEVICE_NAME);
 
 // Init variables to influxdb config - doesn't talk to database
 InfluxDBClient client(INFLUXDB_URL, INFLUXDB_ORG, INFLUXDB_BUCKET, INFLUXDB_TOKEN);

firmware/sensor_wind.ino

@@ -1,9 +1,11 @@
+
 #include "config_user.h"
+#include "config.h"
 
-int anemometerRotations = 0;
-unsigned long currentTime = 0;
+unsigned int anemometerRotations = 0;
 
-ICACHE_RAM_ATTR void _anemometerInterrupt() {
+ICACHE_RAM_ATTR void _anemometerInterrupt()
+{
   anemometerRotations++;
 #ifdef DEBUG
   Serial.print("*");
@@ -12,12 +14,13 @@ ICACHE_RAM_ATTR void _anemometerInterrupt() {
 
 float wind_speed() {
   anemometerRotations = 0;
-  currentTime = millis();
+
   int interruptNumber = digitalPinToInterrupt(ANEMOMETER_PIN);
 
   attachInterrupt(interruptNumber, _anemometerInterrupt, RISING);
-  delay(1000 * 5);
+  delay(1000 * WIND_SENSOR_MEAS_TIME_S); // time to measure
   detachInterrupt(interruptNumber);
 
-  return (float)anemometerRotations / 5.0 * 2.4;
+  return (float)anemometerRotations * COUNT_TO_KMH;
+
 }

firmware/webUpdater.ino

@@ -13,13 +13,23 @@
 #include <WiFiClient.h>
 #include <WiFiManager.h>         // WiFiManager from bib manager
 
-ESP8266WebServer httpServer(8080);
+#include "config.h"
+#include "config_user.h"
+
+ESP8266WebServer httpServer(WEB_UPDATER_HTTP_PORT);
 ESP8266HTTPUpdateServer httpUpdater;
 
 String _webUpdater_ip = "127.0.0.1";
 String _webUpdater_dev = "unknown";
 float  _webUpdater_sensValues[VALUES];
 
+String hb_ws_msg_start     = "{";
+String hb_ws_msg_temp      = "\"temperature\": ";
+String hb_ws_msg_humi      = "\"humidity\": ";
+String hb_ws_msg_light     = "\"light\": ";
+String hb_ws_msg_windspeed = "\"windspeed\": ";
+String hb_ws_msg_end       = "}";
+
 void setupWebUpdater(String device, String ip)
 {
   debug("Starting WebUpdater... " + ip);
@@ -30,6 +40,9 @@ void setupWebUpdater(String device, String ip)
 
   httpServer.on("/", showHTMLMain);
   httpServer.on("/resetWifiManager", resetWifiManager);
+#ifdef HOMEBRIDGE_WEBSTAT
+  httpServer.on("/hbWebstat", hb_webstat_send);
+#endif
 
   httpServer.begin();
 
@@ -42,13 +55,15 @@ void doWebUpdater(void)
   httpServer.handleClient();
 }
 
-void setSensorData(float sensorValues[]) {
+void setSensorData(float sensorValues[])
+{
   for (uint8_t i = 0; i < VALUES; i++) {
     _webUpdater_sensValues[i] = sensorValues[i];
   }
 }
 
-void showHTMLMain(void) {
+void showHTMLMain(void)
+{
   String message = "<html><head><title>OKO Weatherstation - " + String(_webUpdater_dev) + "</title>"
 "<meta http-equiv=\"refresh\" content=\"20\">"
 "</head><body>"
@@ -66,6 +81,20 @@ void showHTMLMain(void) {
   httpServer.send(200, "text/html", message);
 }
 
+void hb_webstat_send(void)
+{
+  httpServer.send(200, "text/html", hb_ws_msg_start +
+                                    hb_ws_msg_temp +
+                                    String(_webUpdater_sensValues[SENSOR_TEMPERATURE], 2) +
+                                    hb_ws_msg_humi +
+                                    String(_webUpdater_sensValues[SENSOR_HUMIDITY], 2) +
+                                    hb_ws_msg_light +
+                                    String(_webUpdater_sensValues[SENSOR_LIGHT], 2) +
+                                    hb_ws_msg_windspeed +
+                                    String(_webUpdater_sensValues[SENSOR_WINDSPEED], 2) +
+                                    hb_ws_msg_end);
+}
+
 void resetWifiManager()
 {
 
@@ -79,9 +108,11 @@ void resetWifiManager()
   httpServer.send(200, "text/html", message);
 
   // Erase WiFi Credentials, enable, compile, flash, disable and reflash.
-  WiFiManager.resetSettings();
+  WiFiManager wifiManager;
+  wifiManager.resetSettings();
 
   delay(5000);
 
+  // manual reset after restart is required
   ESP.restart();
 }