firmware/config.h

@@ -13,7 +13,7 @@
 #define RESET_ESP_TIME_INTERVAL_MS   (60*60*12*1000) // reset every 12 hours
 #define WIND_SENSOR_MEAS_TIME_S          15
 #define WATCHDOG_TIMEOUT_MS           30000
-#define WIFI_CHECK_INTERVAL_MS       600000
+#define WIFI_CHECK_INTERVAL_MS        60000
 
 #define ENERGY_SAVING_ITERATIONS         30
 

firmware/firmware.ino

@@ -35,18 +35,17 @@ float (*sensors[VALUES])() = {};
 uint32_t update_sensor_cnt           = 0;
 uint32_t update_webserver_cnt        = 0;
 uint32_t update_windspeed_exceed_cnt = 0;
-uint32_t wifi_check_interval_counter = 0;
 
 const String wifiName = "oko-weather-" + DEVICE_NAME;
 
+uint32_t wifi_check_interval_counter = millis();
+
 WiFiManager wifiManager;
 
 uint8_t fsm_state = FSM_STATE_WU;
 
 uint8_t sensor_cnt = 0;
 
-boolean validData = false;
-
 //*************************************************************************//
 
 void debug(String x)
@@ -174,7 +173,7 @@ void initSensors()
 void wifiConnectionCheck()
 {
 
-  if ((wifi_check_interval_counter + WIFI_CHECK_INTERVAL_MS) > millis())
+  if (wifi_check_interval_counter + WIFI_CHECK_INTERVAL_MS > millis() or WiFi.status() == WL_CONNECTED)
   {
     // if check interval is not exceeded abort check
     return;
@@ -182,12 +181,6 @@ void wifiConnectionCheck()
 
   wifi_check_interval_counter = millis();
 
-  if (WiFi.status() == WL_CONNECTED)
-  {
-    // if we are connected
-    return;
-  }
-
   debug("no connection or time to check " + String(WiFi.status() == WL_CONNECTED));
 
   wifiConnect();
@@ -259,22 +252,33 @@ void loop()
   // Needed to give WIFI time to function properly
   delay(DELAY_LOOP_MS);
 
+  update_sensor_cnt == millis();
+
+#ifdef WEBUPDATER_FEATURE
+  update_webserver_cnt == millis();
+#endif
+
+#ifdef HTTP_CALL_ON_WINDSPEED_EXCEED
+  update_windspeed_exceed_cnt == millis();
+#endif
+
 }
 
 //*************************************************************************//
 
 void _loop()
 {
+  boolean validData = false;
 
   switch (fsm_state)
   {
 
     case FSM_STATE_WU:
-      //debug("web updater call if required");
+      debug("web updater call if required");
 #ifdef WEBUPDATER_FEATURE
-      if ((update_webserver_cnt + (UPDATE_WEBSERVER_INTVERVAL_S * 1000)) <= millis())
+      if (update_webserver_cnt + (UPDATE_WEBSERVER_INTVERVAL_S * 1000) <= millis())
       {
-        //debug("web updater call");
+        debug("web updater call");
         update_webserver_cnt = millis();
         doWebUpdater();
       }
@@ -285,20 +289,49 @@ void _loop()
     case FSM_STATE_WSE:
       debug("wind speed exceeded check if required");
 #ifdef HTTP_CALL_ON_WINDSPEED_EXCEED
-      if ((update_windspeed_exceed_cnt + (HTTP_CALL_ON_WINDSPEED_INTERVAL_S * 1000)) <= millis())
+      if (update_windspeed_exceed_cnt + (HTTP_CALL_ON_WINDSPEED_INTERVAL_S * 1000) <= millis())
       {
-        debug("reading wind sensor exceed");
+        debug("reading wind sensor because of exceed call functionality");
-
+        if (sensors[SENSOR_WINDSPEED])
+        {
+          // read from windspeed sensorSTATUS_LED_PIN
+          digitalWrite(STATUS_LED_PIN, HIGH);
+          currentSensorData[SENSOR_WINDSPEED] = sensors[SENSOR_WINDSPEED]();
+          digitalWrite(STATUS_LED_PIN, LOW);
+    
+          if (currentSensorData[SENSOR_WINDSPEED] >= HTTP_CALL_ON_WINDSPEED_EXCEED_MPS)
+          {
+            digitalWrite(STATUS_LED_PIN, HIGH);
+    
+            // call the url HTTP_CALL_ON_WINDSPEED_URL
+            WiFiClient client;
+            HTTPClient http;
+    
+            http.begin(client, String(HTTP_CALL_ON_WINDSPEED_URL).c_str());
+            // Send HTTP GET request
+            int httpResponseCode = http.GET();
+    
+            if (httpResponseCode > 0) {
+              String response = http.getString();
+              debug("http response code: " + String(httpResponseCode) + " = " + response);
+              // TODO handle response
+            }
+    
+            http.end();
+            debug("Called windspeed exceed callout");
+            digitalWrite(STATUS_LED_PIN, LOW);
+          }
+        } else {
+          currentSensorData[SENSOR_WINDSPEED] = nan("no value");
+        }
         update_windspeed_exceed_cnt = millis();
-
-        readWindSpeedExceed();
       }
 #endif
       fsm_state = FSM_STATE_RS;
       break;
 
     case FSM_STATE_RS:
-      //debug("reset time check if required");
+      debug("reset time check if required");
 #ifdef RESET_ESP_TIME_INTERVAL
       // if millis() reached interval restart ESP
       if (RESET_ESP_TIME_INTERVAL_MS <= millis())
@@ -312,15 +345,15 @@ void _loop()
       break;
 
     case FSM_STATE_WS:
-      //debug("disable measure of wind speed if required");
+      debug("disable measure of wind speed if required");
 #ifdef defined(BATTERY_POWERED) && defined(SENSOR_WIND)
       if (energySavingMode() == 1) {
         // Disable expensive tasks
         sensors[SENSOR_WINDSPEED] = 0;
-        //debug("read of wind sensor because of low battery disabled");
+        debug("read of wind sensor because of low battery disabled");
       } else {
         sensors[SENSOR_WINDSPEED] = &wind_speed;
-        //debug("read of wind sensor because of high battery enabled");
+        debug("read of wind sensor because of high battery enabled");
       }
 #endif
       sensor_cnt = 0;
@@ -328,8 +361,8 @@ void _loop()
       break;
 
     case FSM_STATE_US:
-      //debug("read sensor data check");
+      debug("read sensor data check");
-      if ((update_sensor_cnt + (UPDATE_SENSOR_INTERVAL_S * 1000)) <= millis())
+      if (update_sensor_cnt + (UPDATE_SENSOR_INTERVAL_S * 1000) <= millis())
       {
         debug("read sensor data " + String(sensor_cnt));
         if (sensors[sensor_cnt]) {
@@ -368,15 +401,11 @@ void _loop()
       {
         if (currentSensorData[i] != 0)
         {
+          // send data only if valid data is available
+          pushToInfluxDB(DEVICE_NAME, currentSensorData);
           validData = true;
         }
       }
-
-      if (validData == true)
-      {
-        // send data only if valid data is available
-        pushToInfluxDB(DEVICE_NAME, currentSensorData);
-      }
 #endif
       fsm_state = FSM_STATE_SD;
       break;
@@ -398,52 +427,12 @@ void _loop()
   //delay(100); // TODO warum hier ein delay?
 
   //debug("FSM state = " + String(fsm_state));
-  /*if (fsm_state == FSM_STATE_WU)
+  if (fsm_state == FSM_STATE_WU)
   {
     debug("----------");
-  }*/
-}
-
-//*************************************************************************//
-
-void readWindSpeedExceed()
-{
-  if (sensors[SENSOR_WINDSPEED])
-  {
-    // read from windspeed sensorSTATUS_LED_PIN
-    digitalWrite(STATUS_LED_PIN, HIGH);
-    currentSensorData[SENSOR_WINDSPEED] = sensors[SENSOR_WINDSPEED]();
-    digitalWrite(STATUS_LED_PIN, LOW);
-
-    if (currentSensorData[SENSOR_WINDSPEED] >= HTTP_CALL_ON_WINDSPEED_EXCEED_MPS)
-    {
-      digitalWrite(STATUS_LED_PIN, HIGH);
-
-      // call the url HTTP_CALL_ON_WINDSPEED_URL
-      WiFiClient client;
-      HTTPClient http;
-
-      http.begin(client, String(HTTP_CALL_ON_WINDSPEED_URL).c_str());
-      // Send HTTP GET request
-      int httpResponseCode = http.GET();
-
-      if (httpResponseCode > 0) {
-        String response = http.getString();
-        debug("http response code: " + String(httpResponseCode) + " = " + response);
-        // TODO handle response
-      }
-
-      http.end();
-      debug("Called windspeed exceed callout");
-      digitalWrite(STATUS_LED_PIN, LOW);
-    }
-  } else {
-    currentSensorData[SENSOR_WINDSPEED] = nan("no value");
   }
 }
 
-//*************************************************************************//
-
 void logToSerial(float sensorValues[])
 {
   Serial.println("");
@@ -457,5 +446,3 @@ void logToSerial(float sensorValues[])
   Serial.println("Bat charge state: " + String(sensorValues[SENSOR_BATCHARGESTATE]));
   Serial.println("Energy saving: " + String(sensorValues[SENSOR_ESAVEMODE]));
 }
-
-//*************************************************************************//

firmware/webUpdater.ino

@@ -101,7 +101,7 @@ void showHTMLMain(void)
 #ifdef HOMEBRIDGE_WEBSTAT
 "<br><a href=\"http://" + _webUpdater_ip + ":8080/hbWebstat\">homebridge websatt</a><br>"
 #endif
-"<br><br><table>"
+"<table>"
 TR_TD_START_STR + "temperature"   + TD_TD_MID_STR + String(_webUpdater_sensValues[SENSOR_TEMPERATURE]) + TR_TD_END_STR
 TR_TD_START_STR + "humidity"      + TD_TD_MID_STR + String(_webUpdater_sensValues[SENSOR_HUMIDITY])    + TR_TD_END_STR
 TR_TD_START_STR + "light"         + TD_TD_MID_STR + String(_webUpdater_sensValues[SENSOR_LIGHT])       + TR_TD_END_STR