firmware/config.h

@@ -6,7 +6,7 @@
 #define WIFI_AUTOCONNECT_TIMEOUT_S       60
 #define WIFI_CONFIG_PORTAL_TIMEOUT_S    120
 #define UPDATE_SENSOR_INTERVAL_S        300
-#define UPDATE_WEBSERVER_INTVERVAL_MS   500 // Values greater than 1000 will negative affect availability of the webinterface
+#define UPDATE_WEBSERVER_INTVERVAL_S      1 // Do not change, bigger values will prevent using webupdater webinterface
 #define DELAY_LOOP_MS                   100
 #define POWERSAVING_SLEEP_S             600
 #define EMERGENCY_SLEEP_S            172800 // Sleep for 2 days to recover
@@ -14,7 +14,6 @@
 #define WIND_SENSOR_MEAS_TIME_S          15
 #define WATCHDOG_TIMEOUT_MS           30000
 #define WIFI_CHECK_INTERVAL_MS       120000
-#define INFLUXDB_TIMEOUT_MS            1000
 
 #define ENERGY_SAVING_ITERATIONS         30
 

firmware/firmware.ino

@@ -338,7 +338,7 @@ void _fsm_loop()
 {
 
 #ifdef WEBUPDATER_FEATURE
-  if ((update_webserver_cnt + (UPDATE_WEBSERVER_INTVERVAL_MS)) <= millis())
+  if ((update_webserver_cnt + (UPDATE_WEBSERVER_INTVERVAL_S * 1000)) <= millis())
   {
     //debug("web updater call");
     update_webserver_cnt = millis();
@@ -360,12 +360,9 @@ void _fsm_loop()
         // reset the wait timer to get a value every HTTP_CALL_ON_WINDSPEED_INTERVAL_S independently to the runtime of the measurement
         update_windspeed_exceed_cnt = millis();
 
-        // start measurement of wind speed
-        start_measure_wind();
-
+        start_measure_wind(); // start measurement of wind speed
         fsm_state = FSM_STATE_11; // wait untile the wind meas time exceeded
         break; // abort case here to prevent read of next sensor in list
-
       }
 #endif
       fsm_state = FSM_STATE_2;

firmware/influxdb.ino

@@ -176,35 +176,26 @@ void pushToInfluxDB(String device, float sensorValues[]) {
 void _writePoint()
 {
 
-  uint32_t _timeout = millis();
-
-  //debug("InfluxDB2: check connection");
-  do {
-  } while (client.validateConnection() and (_timeout + INFLUXDB_TIMEOUT_MS) <= millis());
-
-  if (! client.validateConnection())
-  {
-    debug("Can't write to InfluxDB2, timeout validating connection");
-    return;
-  }
-
-  _timeout = millis();
-
-  //debug("InfluxDB2: waiting for write ready");
   // wait unitl ready
   do {
-  } while (client.canSendRequest() == false and (_timeout + INFLUXDB_TIMEOUT_MS) <= millis());
-
-  if (! client.canSendRequest())
-  {
-    debug("Can't write to InfluxDB2, timeout canSendRequest");
-    return;
-  }
+#ifdef DEBUG
+    Serial.print("InfluxDB: waiting for write ready\n");
+#endif
+  } while (client.canSendRequest() == false);
 
   // Write point
-  if (!client.writePoint(sensor))
-  {
-    debug("InfluxDB2 write failed: " + String(client.getLastErrorMessage()) + " Err: " + String(client.getLastStatusCode()));
+  if (!client.writePoint(sensor)) {
+#ifdef DEBUG
+    Serial.print("InfluxDB write failed: ");
+    Serial.println(client.getLastErrorMessage());
+    Serial.print("\nErrorcode: ");
+    Serial.println(client.getLastStatusCode());
+    Serial.print("\n");
+#endif
+  } else {
+#ifdef DEBUG
+    Serial.print("InfluxDB write done\n");
+#endif    
   }
 
 }

firmware/sensor_wind.ino

@@ -25,11 +25,9 @@ float wind_speed()
 
 void start_measure_wind()
 {
-
   start_meas_wind_time = millis();
   anemometerRotations = 0;
   interruptNumber = digitalPinToInterrupt(ANEMOMETER_PIN);
-
 }
 
 boolean check_measure_wind_done()
@@ -44,6 +42,5 @@ boolean check_measure_wind_done()
 
 float measure_wind_result()
 {
-  start_meas_wind_time = 0;
   return (float)anemometerRotations * WINDSPEED_FACTOR;
 }