Read sensor data code replaced by separate function.

.gitignore

@@ -4,3 +4,4 @@ firmware/.DS_Store
 schematics/#auto_saved_files#
 schematics/_autosave-oko-weatherstation.sch
 firmware.ino.bin
+firmware/extract me in arduino libraries folder.zip

firmware/firmware.ino

@@ -30,16 +30,6 @@ const uint8_t VALUES = 8; // see constants.h file - count of number of SENSOR_ d
 float currentSensorData[VALUES] = { nanf("no value"), nanf("no value"), nanf("no value"),
                                     nanf("no value"), nanf("no value"), nanf("no value"),
                                     nanf("no value"), nanf("no value") };
-float (*sensors[VALUES])() = {};
-
-uint8_t sensor_value[] = { SENSOR_TEMPERATURE,
-                           SENSOR_HUMIDITY,
-                           SENSOR_LIGHT,
-                           SENSOR_WINDSPEED,
-                           SENSOR_PRESSURE,
-                           SENSOR_BAT_VOLTAGE,
-                           SENSOR_ESAVEMODE,
-                           SENSOR_BATCHARGESTATE };
 
 uint32_t update_sensor_cnt           = 0;
 uint32_t update_webserver_cnt        = 0;
@@ -56,6 +46,8 @@ uint8_t sensor_cnt = 0;
 
 boolean validData = false;
 
+boolean do_not_read_windsensor = false;
+
 //*************************************************************************//
 
 void debug(String x)
@@ -147,35 +139,84 @@ void initSensors()
 {
   // Initialize and configure the sensors
 #ifdef SENSOR_APDS9930
-  if (sensor_apds9930_begin()) {
+  if (sensor_apds9930_begin();
-    sensors[SENSOR_LIGHT] = &apds9930_light;
-  }
 #endif
 
 #ifdef SENSOR_APDS9960
-  if (sensor_apds9960_begin()) {
+  sensor_apds9960_begin();
-    sensors[SENSOR_LIGHT] = &apds9960_light;
-  }
 #endif
 
 #ifdef SENSOR_BME280
   //Temperature + pressure
-  if (sensor_bme280_begin(BME_ADDRESS)) {
+  sensor_bme280_begin(BME_ADDRESS);
-    sensors[SENSOR_TEMPERATURE] = &bme280_temperature;
-    sensors[SENSOR_HUMIDITY]    = &bme280_humidity;
-    sensors[SENSOR_PRESSURE]    = &bme280_pressure;
-  }
 #endif
+}
 
+float readSensors(uint8_t s)
+{
+  float ret = nan("no value");
+
+  switch(s)
+  {
+    case SENSOR_LIGHT: // Initialize and configure the sensors
+#ifdef SENSOR_APDS9930
+      ret = apds9930_light();
+#endif
+#ifdef SENSOR_APDS9960
+      ret = apds9960_light();
+#endif
+      break;
+
+    case SENSOR_TEMPERATURE:
+#ifdef SENSOR_BME280
+      ret = bme280_temperature();
+#endif
+      break;
+
+    case SENSOR_HUMIDITY:
+#ifdef SENSOR_BME280
+      ret = bme280_humidity();
+#endif
+      break;
+
+    case SENSOR_PRESSURE:
+#ifdef SENSOR_BME280
+      ret = bme280_pressure();
+#endif
+      break;
+
+    case SENSOR_WINDSPEED:
 #ifdef SENSOR_WIND
-  sensors[SENSOR_WINDSPEED] = &wind_speed;
+      if (do_not_read_windsensor == false)
+      {
+        ret = wind_speed();
+      }
 #endif
+      break;
 
+    case SENSOR_BAT_VOLTAGE:
 #ifdef SENSOR_BATTERY
-  sensors[SENSOR_BAT_VOLTAGE]    = &battery_voltage;
+      ret = battery_voltage();
-  sensors[SENSOR_BATCHARGESTATE] = &battery_charging;
-  sensors[SENSOR_ESAVEMODE]      = &isEnergySavingMode;
 #endif
+      break;
+
+    case SENSOR_ESAVEMODE:
+#ifdef SENSOR_BATTERY
+      ret = battery_charging();
+#endif
+      break;
+
+    case SENSOR_BATCHARGESTATE:
+#ifdef SENSOR_BATTERY
+      ret = isEnergySavingMode();
+#endif
+      break;
+
+    default:
+      break;
+  }
+
+  return ret;
 }
 
 //*************************************************************************//
@@ -294,7 +335,7 @@ void _loop()
       break;
 
     case FSM_STATE_WSE:
-      debug("wind speed exceeded check if required");
+      //debug("wind speed exceeded check if required");
 #ifdef HTTP_CALL_ON_WINDSPEED_EXCEED
       if ((update_windspeed_exceed_cnt + (HTTP_CALL_ON_WINDSPEED_INTERVAL_S * 1000)) <= millis())
       {
@@ -332,11 +373,14 @@ void _loop()
 #ifdef defined(BATTERY_POWERED) && defined(SENSOR_WIND)
       if (energySavingMode() == 1) {
         // Disable expensive tasks
-        sensors[SENSOR_WINDSPEED] = 0;
+        //sensors[SENSOR_WINDSPEED] = 0;
         //debug("read of wind sensor because of low battery disabled");
+        do_not_read_windsensor = true;
+
       } else {
-        sensors[SENSOR_WINDSPEED] = &wind_speed;
+        //sensors[SENSOR_WINDSPEED] = &wind_speed;
         //debug("read of wind sensor because of high battery enabled");
+        do_not_read_windsensor = false;
       }
 #endif
       sensor_cnt = 0;
@@ -348,35 +392,30 @@ void _loop()
       if ((update_sensor_cnt + (UPDATE_SENSOR_INTERVAL_S * 1000)) <= millis())
       {
         debug("read sensor data " + String(sensor_cnt));
-        if (sensors[sensor_cnt])
-        {
-          debug("sensors[sensor_value[" + String(sensor_cnt) + " ]]=" + String((int)sensors[sensor_value[sensor_cnt]]) + ":" + String(sensor_value[sensor_cnt]));
-          currentSensorData[sensor_cnt] = sensors[sensor_value[sensor_cnt]]();
-          //currentSensorData[sensor_cnt] = sensor_cnt;
 
-        } else {
+        currentSensorData[sensor_cnt] = readSensors(sensor_cnt);
-
-          debug("sensors[sensor_value[" + String(sensor_cnt) + "]]=nan");
-          currentSensorData[sensor_cnt] = nan("no value");
-        }
   
         if (sensor_cnt < VALUES)
         {
           sensor_cnt++;
           fsm_state = FSM_STATE_US; // jump to same state again, more sensors to read
+
         } else {
+
           update_sensor_cnt = millis();
           sensor_cnt = 0;
           fsm_state = FSM_STATE_SC; // next state
         }
+
       } else {
-        debug("skip read sensor data");
+
+        //debug("skip read sensor data");
         fsm_state = FSM_STATE_WU; // no new data, reset FSM
       }
       break;
 
     case FSM_STATE_SC:
-      debug("log to serial if required");
+      //debug("log to serial if required");
 #ifdef SERIAL_FEATURE
       logToSerial(currentSensorData);
 #endif
@@ -384,7 +423,7 @@ void _loop()
       break;
 
     case FSM_STATE_ID:
-      debug("send data to influxdb if required");
+      //debug("send data to influxdb if required");
 #ifdef INFLUXDB_FEATURE
       for (uint8_t i = 0; i < 5 and validData == false; i++)
       {
@@ -404,7 +443,7 @@ void _loop()
       break;
 
     case FSM_STATE_SD:
-      debug("set sensor data in webupdater if required");
+      //debug("set sensor data in webupdater if required");
 #ifdef WEBUPDATER_FEATURE
       setSensorData(currentSensorData);
 #endif
@@ -430,43 +469,39 @@ void _loop()
 
 void readWindSpeedExceed()
 {
-  if (sensors[SENSOR_WINDSPEED])
+
+  // read from windspeed sensorSTATUS_LED_PIN
+  digitalWrite(STATUS_LED_PIN, HIGH);
+  currentSensorData[SENSOR_WINDSPEED] = readSensors(SENSOR_WINDSPEED);
+  digitalWrite(STATUS_LED_PIN, LOW);
+
+  if (currentSensorData[SENSOR_WINDSPEED] >= HTTP_CALL_ON_WINDSPEED_EXCEED_MPS)
   {
-    // read from windspeed sensorSTATUS_LED_PIN
     digitalWrite(STATUS_LED_PIN, HIGH);
-    currentSensorData[SENSOR_WINDSPEED] = sensors[SENSOR_WINDSPEED]();
-    digitalWrite(STATUS_LED_PIN, LOW);
 
-    if (currentSensorData[SENSOR_WINDSPEED] >= HTTP_CALL_ON_WINDSPEED_EXCEED_MPS)
+    // call the url HTTP_CALL_ON_WINDSPEED_URL
-    {
+    WiFiClient client;
-      digitalWrite(STATUS_LED_PIN, HIGH);
+    HTTPClient http;
 
-      // call the url HTTP_CALL_ON_WINDSPEED_URL
+    http.begin(client, String(HTTP_CALL_ON_WINDSPEED_URL).c_str());
-      WiFiClient client;
+    // Send HTTP GET request
-      HTTPClient http;
+    int httpResponseCode = http.GET();
 
-      http.begin(client, String(HTTP_CALL_ON_WINDSPEED_URL).c_str());
+    if (httpResponseCode > 0) {
-      // Send HTTP GET request
+      String response = http.getString();
-      int httpResponseCode = http.GET();
+      debug("http response code: " + String(httpResponseCode) + " = " + response);
-
+      // TODO handle response
-      if (httpResponseCode > 0) {
-        String response = http.getString();
-        debug("http response code: " + String(httpResponseCode) + " = " + response);
-        // TODO handle response
-      }
-
-      http.end();
-      debug("Called windspeed exceed callout");
-      digitalWrite(STATUS_LED_PIN, LOW);
     }
 
+    http.end();
+    debug("Called windspeed exceed callout");
+    digitalWrite(STATUS_LED_PIN, LOW);
+  }
+
 #ifdef WEBUPDATER_FEATURE
-    setSensorData(currentSensorData);
+  setSensorData(currentSensorData);
 #endif
 
-  } else {
-    currentSensorData[SENSOR_WINDSPEED] = nan("no value");
-  }
 }
 
 //*************************************************************************//

firmware/webUpdater.ino

@@ -210,7 +210,7 @@ void measureWindspeed()
 
 #ifdef USE_LOGGER
 
-#define LOGFILE_SIZE 20
+#define LOGFILE_SIZE 25
 
 String logfile[LOGFILE_SIZE];