esphome_config/esphome_run_weatherstation.sh

@@ -1,2 +0,0 @@
-
-sudo docker-compose exec esphome esphome run /config/weatherstation.yml

esphome_config/weatherstation.yml

@@ -1,179 +0,0 @@
-esphome:
-  name: weatherstation
-  platform: ESP8266
-  board: d1_mini
-
-i2c:
-  - id: bus_a
-    sda: 4 # D2
-    scl: 5 # D1
-    scan: true
-
-apds9960:
-    address: 0x39
-    update_interval: 300s
-
-sensor:
-  #
-  #################### wind sensor
-  - platform: pulse_counter
-    pin: 
-      # pin D8
-      number: GPIO15
-      mode: INPUT # TODO check if required
-    unit_of_measurement: 'm/s' ##change to m/s if metric
-    name: 'wind_speed'
-    icon: 'mdi:weather-windy'
-    id: my_wind
-    count_mode:
-      rising_edge: DISABLE
-      falling_edge: INCREMENT
-    internal_filter: 50us
-    update_interval: 60s
-    #rotations_per_sec = pulses/2/60
-    #circ_m=0.09*2*3.14 = 0.5652
-    #mps = 1.18*circ_m*rotations_per_sec
-    #mps = 1.18*0.5652/2/60 =0,0055578
-    filters:
-      - multiply: 0.0055578 #use for m/s
-      # - multiply: 2.237 #m/s to mph
-      # - sliding_window_moving_average:
-      #     window_size: 4
-      #     send_every: 1
-      #- multiply: 0.04973 #1.492mph switch to close 1/sec per spec, pulse/sec (/60/2)*1.492
-      #- multiply: 0.0124327986 #m/s * mph conversion
-
-  #################### apds9960 sensor i2c
-  - platform: apds9960
-    type: CLEAR
-    name: "APDS9960_clear_channel"
-  - platform: apds9960
-    type: RED
-    name: "APDS9960_red_channel"
-    id: apds9960_red
-  - platform: apds9960
-    type: GREEN
-    name: "APDS9960_green_channel"
-    id: apds9960_green
-  - platform: apds9960
-    type: BLUE
-    name: "APDS9960_blue_channel"
-    id: apds9960_blue
-  # TODO fix calculation to get lux instead of a percentual value
-  #
-  # Code from Adafruit_APDS9960 lib:
-  # illuminance = (-0.32466F * r) + (1.57837F * g) + (-0.73191F * b);
-  #
-  # Code from: https://esphome.io/api/apds9960_8cpp_source.html
-  # 180:   float red_perc = (uint_red / float(UINT16_MAX)) * 100.0f;
-  # 181:   float green_perc = (uint_green / float(UINT16_MAX)) * 100.0f;
-  # 182:   float blue_perc = (uint_blue / float(UINT16_MAX)) * 100.0f;
-  - platform: template
-    name: "light"
-    lambda: |-
-      const float perc_to_raw = 65535.0 / 100.0;
-      const float   red_to_lux = -0.32466;
-      const float green_to_lux =  1.57837;
-      const float  blue_to_lux = -0.73191;
-      return ((red_to_lux * id(apds9960_red).raw_state) + (green_to_lux * id(apds9960_green).raw_state) + (blue_to_lux * id(apds9960_blue).raw_state)) * perc_to_raw;
-    update_interval: 300s
-    accuracy_decimals: 2
-    unit_of_measurement: 'lux'
-
-  #################### bme280 sensor i2c
-  - platform: bme280
-    temperature:
-      name: "BME280_temperature"
-      id: bme280_temperature
-    pressure:
-      name: "BME280_ressure"
-      id: bme280_pressure
-    humidity:
-      name: "BME280 Relative Humidity"
-      id: bme280_humidity
-    address: 0x76
-    update_interval: 300s
-
-  - platform: template
-    name: "altitude"
-    lambda: |-
-      const float STANDARD_SEA_LEVEL_PRESSURE = 1013.25; //in hPa, see note
-      return ((id(bme280_temperature).state + 273.15) / 0.0065) *
-        (powf((STANDARD_SEA_LEVEL_PRESSURE / id(bme280_pressure).state), 0.190234) - 1); // in meter
-    update_interval: 300s
-    icon: 'mdi:signal'
-    unit_of_measurement: 'm'
-
-  - platform: template
-    name: "absolute_humidity"
-    lambda: |-
-      const float mw = 18.01534;    // molar mass of water g/mol
-      const float r = 8.31447215;   // Universal gas constant J/mol/K
-      return (6.112 * powf(2.718281828, (17.67 * id(bme280_temperature).state) /
-        (id(bme280_temperature).state + 243.5)) * id(bme280_humidity).state * mw) /
-        ((273.15 + id(bme280_temperature).state) * r); // in grams/m^3
-    accuracy_decimals: 2
-    update_interval: 300s
-    icon: 'mdi:water'
-    unit_of_measurement: 'g/m³'
-
-  - platform: template
-    name: "dew_point"
-    lambda: |-
-      return (243.5*(log(id(bme280_humidity).state/100)+((17.67*id(bme280_temperature).state)/
-      (243.5+id(bme280_temperature).state)))/(17.67-log(id(bme280_humidity).state/100)-
-      ((17.67*id(bme280_temperature).state)/(243.5+id(bme280_temperature).state))));
-    unit_of_measurement: °C
-    update_interval: 300s
-    icon: 'mdi:thermometer-alert'
-
-  # battery power adc
-  - platform: adc
-    pin: A0
-    name: "battery_power"
-    update_interval: 300s
-
-binary_sensor:
-  # battery charged pin
-  - platform: gpio
-    pin:
-      number: 12 # D6
-      mode:
-        input: true
-        pullup: false
-    name: "battery_charged"
-
-  # battery charging pin
-  - platform: gpio
-    pin:
-      number: 14 # D5
-      mode:
-        input: true
-        pullup: false
-    name: "battery_charging"
-
-time:
-  - platform: sntp
-    id: my_time
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-  password: "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"
-
-wifi:
-  ssid: UPC4556888
-  password: emmydhvZ4faw
-  manual_ip:
-    # Set this to the IP of the ESP
-    static_ip: 192.168.0.91
-    # Set this to the IP address of the router. Often ends with .1
-    gateway: 192.168.0.1
-    # The subnet of the network. 255.255.255.0 works for most home networks.
-    subnet: 255.255.255.0
-    
-captive_portal:

esphome_firmware/weatherstation.yml

@@ -1,146 +0,0 @@
-esphome:
-  name: weatherstation
-  platform: ESP8266
-  board: d1_mini
-
-i2c:
-  - id: bus_a
-    sda: 4 # D2
-    scl: 5 # D1
-    scan: true
-
-apds9960:
-    address: 0x39
-    update_interval: 300s
-
-sensor:
-  #
-  #################### wind sensor
-  - platform: pulse_counter
-    pin: 
-      # pin D8
-      number: GPIO15
-      mode: INPUT_PULLUP # TODO check if required
-    unit_of_measurement: 'm/s' ##change to m/s if metric
-    name: 'wind_speed'
-    icon: 'mdi:weather-windy'
-    id: my_wind
-    count_mode:
-      rising_edge: DISABLE
-      falling_edge: INCREMENT
-    internal_filter: 50us
-    update_interval: 300s 
-    #rotations_per_sec = pulses/2/60
-    #circ_m=0.09*2*3.14 = 0.5652
-    #mps = 1.18*circ_m*rotations_per_sec
-    #mps = 1.18*0.5652/2/60 =0,0055578
-    filters:
-      - multiply: 0.0055578 #use for m/s
-      # - multiply: 2.237 #m/s to mph
-      # - sliding_window_moving_average:
-      #     window_size: 4
-      #     send_every: 1
-      #- multiply: 0.04973 #1.492mph switch to close 1/sec per spec, pulse/sec (/60/2)*1.492
-      #- multiply: 0.0124327986 #m/s * mph conversion
-
-  #################### apds9960 sensor i2c
-  - platform: apds9960
-    type: CLEAR
-    name: "APDS9960_clear_channel"
-
-  - platform: bme280
-    temperature:
-      name: "BME280_temperature"
-      id: bme280_temperature
-    pressure:
-      name: "BME280_ressure"
-      id: bme280_pressure
-    humidity:
-      name: "BME280 Relative Humidity"
-      id: bme280_humidity
-    address: 0x76
-    update_interval: 300s
-
-  - platform: template
-    name: "altitude"
-    lambda: |-
-      const float STANDARD_SEA_LEVEL_PRESSURE = 1013.25; //in hPa, see note
-      return ((id(bme280_temperature).state + 273.15) / 0.0065) *
-        (powf((STANDARD_SEA_LEVEL_PRESSURE / id(bme280_pressure).state), 0.190234) - 1); // in meter
-    update_interval: 300s
-    icon: 'mdi:signal'
-    unit_of_measurement: 'm'
-
-  - platform: template
-    name: "absolute_humidity"
-    lambda: |-
-      const float mw = 18.01534;    // molar mass of water g/mol
-      const float r = 8.31447215;   // Universal gas constant J/mol/K
-      return (6.112 * powf(2.718281828, (17.67 * id(bme280_temperature).state) /
-        (id(bme280_temperature).state + 243.5)) * id(bme280_humidity).state * mw) /
-        ((273.15 + id(bme280_temperature).state) * r); // in grams/m^3
-    accuracy_decimals: 2
-    update_interval: 300s
-    icon: 'mdi:water'
-    unit_of_measurement: 'g/m³'
-
-  - platform: template
-    name: "dew_point"
-    lambda: |-
-      return (243.5*(log(id(bme280_humidity).state/100)+((17.67*id(bme280_temperature).state)/
-      (243.5+id(bme280_temperature).state)))/(17.67-log(id(bme280_humidity).state/100)-
-      ((17.67*id(bme280_temperature).state)/(243.5+id(bme280_temperature).state))));
-    unit_of_measurement: °C
-    update_interval: 300s
-    icon: 'mdi:thermometer-alert'
-
-  # battery power adc
-  - platform: adc
-    pin: A0
-    name: "battery_power"
-    update_interval: 300s
-
-binary_sensor:
-  # battery charged pin
-  - platform: gpio
-    pin:
-      number: 12 # D6
-      mode:
-        input: true
-        pullup: false
-    name: "battery_charged"
-
-  # battery charging pin
-  - platform: gpio
-    pin:
-      number: 14 # D5
-      mode:
-        input: true
-        pullup: false
-    name: "battery_charging"
-
-time:
-  - platform: sntp
-    id: my_time
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-
-ota:
-  password: "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"
-
-wifi:
-  ssid: UPC4556888
-  password: emmydhvZ4faw
-  manual_ip:
-    # Set this to the IP of the ESP
-    static_ip: 192.168.0.91
-    # Set this to the IP address of the router. Often ends with .1
-    gateway: 192.168.0.1
-    # The subnet of the network. 255.255.255.0 works for most home networks.
-    subnet: 255.255.255.0
-    
-captive_portal:

firmware/config.h

@@ -18,7 +18,7 @@
 
 #define WIFI_AUTOCONNECT_TIMEOUT_S      120
 #define WIFI_CONFIG_PORTAL_TIMEOUT_S    120
-#define UPDATE_SENSOR_INTERVAL_S         10
+#define UPDATE_SENSOR_INTERVAL_S        300
 #define UPDATE_WEBSERVER_INTVERVAL_S      1
 #define DELAY_LOOP_MS                    50
 #define POWERSAVING_SLEEP_S             600

firmware/firmware.ino

@@ -1,4 +1,4 @@
-// Standard ESP8266 libs
+// Standard ESP8266 libs from project folder
 #include <ESP8266mDNS.h>
 #include <ESP8266HTTPUpdateServer.h>
 #include <ESP8266WiFi.h>
@@ -6,7 +6,7 @@
 #include <ESP8266WebServer.h>
 
 #include <WiFiClient.h>          // WiFiClient
-#include <WiFiManager.h>         // WiFiManager
+#include <WiFiManager.h>         // WiFiManager from bib manager
 
 // Project includes
 #include "config.h"
@@ -35,7 +35,7 @@ void debug(String x) {
 
 void setup() {
 
-  // Erase WiFi Credentials (maybe this will work ...)
+  // Erase WiFi Credentials, enable, compile, flash, disable and reflash.
   //WiFi.disconnect(true);
   //delay(2000);
   //ESP.reset();
@@ -118,6 +118,12 @@ void setup() {
 #ifndef BATTERY_POWERED
   setupWebUpdater(DEVICE_NAME, WiFi.localIP().toString());
 #endif
+#endif
+
+#ifdef HOMEBRIDGE_WEBSTAT
+#ifndef BATTERY_POWERED
+  hb_webstat_server_setup();
+#endif
 #endif
 
   //It's magic! leave in
@@ -192,7 +198,6 @@ void _loop() {
   }
 #endif
 
-
 #ifdef defined(BATTERY_POWERED) && defined(SENSOR_WIND)
   if (energySavingMode() == 1) {
     // Disable expensive tasks
@@ -225,6 +230,11 @@ void _loop() {
 #ifdef WEBUPDATER_FEATURE
   setSensorData(currentSensorData);
 #endif
+
+#ifdef HOMEBRIDGE_WEBSTAT
+  hb_webstat_loop(currentSensorData);
+#endif
+
 }
 
 void logToSerial(float sensorValues[]) {

firmware/hb_webstat_srv.ino

@@ -0,0 +1,30 @@
+
+// Port des Web Servers auf 80 setzen
+
+#ifdef HOMEBRIDGE_WEBSTAT
+
+WiFiServer hb_webstat_server(80);
+
+const char *hb_ws_msg_start = "{\"temperature\": ";
+const char *hb_ws_msg_mid   = "\"humidity\": ";
+const char *hb_ws_msg_end   = "}";
+
+void hb_webstat_setup()
+{
+	hb_webstat_server.begin()
+}
+
+void hb_webstat_send(floar currentSensorDfloar currentSensorData[]ata[])
+{
+	WiFiClient client = server.available();
+
+	if (client.available()) {
+		client.print(hb_ws_msg_start);
+		client.print(String(currentSensorData[0],2));
+		client.print(hb_ws_msg_mid);
+		client.print(hb_ws_msg_end);
+	}
+}
+
+#endif
+      

firmware/influxdb.ino

@@ -1,76 +1,103 @@
-#include <ESP8266Influxdb.h>     // https://github.com/hwwong/ESP8266Influxdb
+#include <InfluxDbClient.h> // from bib manager
 
-Influxdb _influxdb(INFLUXDB_HOST, INFLUXDB_PORT);
+// Data point
+Point sensor("weatherstation");
+
+// Init variables to influxdb config - doesn't talk to database
+InfluxDBClient client(INFLUXDB_URL, INFLUXDB_ORG, INFLUXDB_BUCKET, INFLUXDB_TOKEN);
 
 void influxdb_begin() {
-  // Init variables to influxdb config - doesn't talk to database
+
-  _influxdb.opendb(INFLUXDB_DB, INFLUXDB_USER, INFLUXDB_PASS);
+  // Check server connection
+  if (client.validateConnection()) {
+    // success
+#ifdef DEBUG
+    Serial.print("InfluxDB connect success\n");
+#endif
+  } else {
+    // fail
+#ifdef DEBUG
+    Serial.print("InfluxDB connect failed\n");
+#endif
+  }
+
 }
 
 void pushToInfluxDB(String device, float sensorValues[]) {
-  uint8_t tries = 0;
-  boolean addComma = false;
 
-  String msg = "weather,device=" + device + " ";
   if (!(isnan(sensorValues[SENSOR_TEMPERATURE])))
   {
-    msg += "temperature=" + String(sensorValues[SENSOR_TEMPERATURE]);
+    sensor.clearFields();
-    addComma = true;
+    sensor.addField("temperature", sensorValues[SENSOR_TEMPERATURE]);
+    _writePoint();
   }
   if (!(isnan(sensorValues[SENSOR_HUMIDITY])))
   {
-    if (true == addComma)
+    sensor.clearFields();
-      msg += ",";
+    sensor.addField("humidity", sensorValues[SENSOR_HUMIDITY]);
-    msg += "humidity=" + String(sensorValues[SENSOR_HUMIDITY]);
+    _writePoint();
-    addComma = true;
   }
   if (!(isnan(sensorValues[SENSOR_LIGHT])))
   {
-    if (true == addComma)
+    sensor.clearFields();
-      msg += ",";
+    sensor.addField("light", sensorValues[SENSOR_LIGHT]);
-    msg += "light=" + String(sensorValues[SENSOR_LIGHT]);
+    _writePoint();
-    addComma = true;
   }
   if (!(isnan(sensorValues[SENSOR_WINDSPEED])))
   {
-    if (true == addComma)
+    sensor.clearFields();
-      msg += ",";
+    sensor.addField("windspeed", sensorValues[SENSOR_WINDSPEED]);
-    msg += "windspeed=" + String(sensorValues[SENSOR_WINDSPEED]);
+    _writePoint();
-    addComma = true;
   }
   if (!(isnan(sensorValues[SENSOR_PRESSURE])))
   {
-    if (true == addComma)
+    sensor.clearFields();
-      msg += ",";
+    sensor.addField("pressure", sensorValues[SENSOR_PRESSURE]);
-    msg += "pressure=" + String(sensorValues[SENSOR_PRESSURE]);
+    _writePoint();
-    addComma = true;
   }
   if (!(isnan(sensorValues[SENSOR_BAT_VOLTAGE])))
   {
-    if (true == addComma)
+    sensor.clearFields();
-      msg += ",";
+    sensor.addField("batvoltage", sensorValues[SENSOR_BAT_VOLTAGE]);
-    msg += "batvoltage=" + String(sensorValues[SENSOR_BAT_VOLTAGE]);
+    _writePoint();
-    addComma = true;
   }
   if (!(isnan(sensorValues[SENSOR_ESAVEMODE])))
   {
-    if (true == addComma)
+    sensor.clearFields();
-      msg += ",";
+    sensor.addField("esavemode", sensorValues[SENSOR_ESAVEMODE]);
-    msg += "esavemode=" + String(sensorValues[SENSOR_ESAVEMODE]);
+    _writePoint();
-    addComma = true;
   }
   if (!(isnan(sensorValues[SENSOR_BATCHARGESTATE])))
   {
-    if (true == addComma)
+    sensor.clearFields();
-      msg += ",";
+    sensor.addField("batchargestate", sensorValues[SENSOR_BATCHARGESTATE]);
-    msg += "batchargestate=" + String(sensorValues[SENSOR_BATCHARGESTATE]);
+    _writePoint();
-    addComma = true;
+  }
+
+}
+
+void _writePoint() {
+
+  // wait unitl ready
+  do {
+#ifdef DEBUG
+    Serial.print("InfluxDB: waiting for write ready\n");
+#endif
+  } while (client.canSendRequest() == false);
+
+  // Write point
+  if (!client.writePoint(sensor)) {
+#ifdef DEBUG
+    Serial.print("InfluxDB write failed: ");
+    Serial.println(client.getLastErrorMessage());
+    Serial.print("\nErrorcode: ");
+    Serial.println(client.getLastStatusCode());
+    Serial.print("\n");
+#endif
+  } else {
+#ifdef DEBUG
+    Serial.print("InfluxDB write done\n");
+#endif    
   }
 
-  debug(msg);
-
-  do {
-    tries++;
-    _influxdb.write(msg);
-  } while (_influxdb.response() != DB_SUCCESS and tries < 5);
 }