firmware/firmware.ino

@@ -30,7 +30,6 @@ const uint8_t VALUES = 8; // see constants.h file - count of number of SENSOR_ d
 float currentSensorData[VALUES] = { nanf("no value"), nanf("no value"), nanf("no value"),
                                     nanf("no value"), nanf("no value"), nanf("no value"),
                                     nanf("no value"), nanf("no value") };
-float (*sensors[VALUES])() = {};
 
 uint32_t update_sensor_cnt           = 0;
 uint32_t update_webserver_cnt        = 0;
@@ -47,6 +46,8 @@ uint8_t sensor_cnt = 0;
 
 boolean validData = false;
 
+boolean do_not_read_windsensor = false;
+
 //*************************************************************************//
 
 void debug(String x)
@@ -138,35 +139,84 @@ void initSensors()
 {
   // Initialize and configure the sensors
 #ifdef SENSOR_APDS9930
-  if (sensor_apds9930_begin()) {
+  if (sensor_apds9930_begin();
-    sensors[SENSOR_LIGHT] = &apds9930_light;
-  }
 #endif
 
 #ifdef SENSOR_APDS9960
-  if (sensor_apds9960_begin()) {
+  sensor_apds9960_begin();
-    sensors[SENSOR_LIGHT] = &apds9960_light;
-  }
 #endif
 
 #ifdef SENSOR_BME280
   //Temperature + pressure
-  if (sensor_bme280_begin(BME_ADDRESS)) {
+  sensor_bme280_begin(BME_ADDRESS);
-    sensors[SENSOR_TEMPERATURE] = &bme280_temperature;
-    sensors[SENSOR_HUMIDITY]    = &bme280_humidity;
-    sensors[SENSOR_PRESSURE]    = &bme280_pressure;
-  }
 #endif
+}
 
+float readSensors(uint8_t s)
+{
+  float ret = nan("no value");
+
+  switch(s)
+  {
+    case SENSOR_LIGHT: // Initialize and configure the sensors
+#ifdef SENSOR_APDS9930
+      ret = apds9930_light();
+#endif
+#ifdef SENSOR_APDS9960
+      ret = apds9960_light();
+#endif
+      break;
+
+    case SENSOR_TEMPERATURE:
+#ifdef SENSOR_BME280
+      ret = bme280_temperature();
+#endif
+      break;
+
+    case SENSOR_HUMIDITY:
+#ifdef SENSOR_BME280
+      ret = bme280_humidity();
+#endif
+      break;
+
+    case SENSOR_PRESSURE:
+#ifdef SENSOR_BME280
+      ret = bme280_pressure();
+#endif
+      break;
+
+    case SENSOR_WINDSPEED:
 #ifdef SENSOR_WIND
-  sensors[SENSOR_WINDSPEED] = &wind_speed;
+      if (do_not_read_windsensor == false)
+      {
+        ret = wind_speed();
+      }
 #endif
+      break;
 
+    case SENSOR_BAT_VOLTAGE:
 #ifdef SENSOR_BATTERY
-  sensors[SENSOR_BAT_VOLTAGE]    = &battery_voltage;
+      ret = battery_voltage();
-  sensors[SENSOR_BATCHARGESTATE] = &battery_charging;
-  sensors[SENSOR_ESAVEMODE]      = &isEnergySavingMode;
 #endif
+      break;
+
+    case SENSOR_ESAVEMODE:
+#ifdef SENSOR_BATTERY
+      ret = battery_charging();
+#endif
+      break;
+
+    case SENSOR_BATCHARGESTATE:
+#ifdef SENSOR_BATTERY
+      ret = isEnergySavingMode();
+#endif
+      break;
+
+    default:
+      break;
+  }
+
+  return ret;
 }
 
 //*************************************************************************//
@@ -323,12 +373,14 @@ void _loop()
 #ifdef defined(BATTERY_POWERED) && defined(SENSOR_WIND)
       if (energySavingMode() == 1) {
         // Disable expensive tasks
-        sensors[SENSOR_WINDSPEED] = 0;
+        //sensors[SENSOR_WINDSPEED] = 0;
         //debug("read of wind sensor because of low battery disabled");
+        do_not_read_windsensor = true;
 
       } else {
-        sensors[SENSOR_WINDSPEED] = &wind_speed;
+        //sensors[SENSOR_WINDSPEED] = &wind_speed;
         //debug("read of wind sensor because of high battery enabled");
+        do_not_read_windsensor = false;
       }
 #endif
       sensor_cnt = 0;
@@ -340,17 +392,8 @@ void _loop()
       if ((update_sensor_cnt + (UPDATE_SENSOR_INTERVAL_S * 1000)) <= millis())
       {
         debug("read sensor data " + String(sensor_cnt));
-        if (sensors[sensor_cnt])
-        {
-          debug("sensors[sensor_ids[" + String(sensor_cnt) + "]]=" + String((int)sensors[sensor_cnt]));
-          //currentSensorData[sensor_cnt] = sensors[sensor_cnt]();
-          currentSensorData[sensor_cnt] = sensor_cnt;
 
-        } else {
+        currentSensorData[sensor_cnt] = readSensors(sensor_cnt);
-
-          debug("sensors[" + String(sensor_cnt) + "]=nan");
-          currentSensorData[sensor_cnt] = nan("no value");
-        }
   
         if (sensor_cnt < VALUES)
         {
@@ -426,43 +469,39 @@ void _loop()
 
 void readWindSpeedExceed()
 {
-  if (sensors[SENSOR_WINDSPEED])
+
+  // read from windspeed sensorSTATUS_LED_PIN
+  digitalWrite(STATUS_LED_PIN, HIGH);
+  currentSensorData[SENSOR_WINDSPEED] = readSensors(SENSOR_WINDSPEED);
+  digitalWrite(STATUS_LED_PIN, LOW);
+
+  if (currentSensorData[SENSOR_WINDSPEED] >= HTTP_CALL_ON_WINDSPEED_EXCEED_MPS)
   {
-    // read from windspeed sensorSTATUS_LED_PIN
     digitalWrite(STATUS_LED_PIN, HIGH);
-    currentSensorData[SENSOR_WINDSPEED] = sensors[SENSOR_WINDSPEED]();
-    digitalWrite(STATUS_LED_PIN, LOW);
 
-    if (currentSensorData[SENSOR_WINDSPEED] >= HTTP_CALL_ON_WINDSPEED_EXCEED_MPS)
+    // call the url HTTP_CALL_ON_WINDSPEED_URL
-    {
+    WiFiClient client;
-      digitalWrite(STATUS_LED_PIN, HIGH);
+    HTTPClient http;
 
-      // call the url HTTP_CALL_ON_WINDSPEED_URL
+    http.begin(client, String(HTTP_CALL_ON_WINDSPEED_URL).c_str());
-      WiFiClient client;
+    // Send HTTP GET request
-      HTTPClient http;
+    int httpResponseCode = http.GET();
 
-      http.begin(client, String(HTTP_CALL_ON_WINDSPEED_URL).c_str());
+    if (httpResponseCode > 0) {
-      // Send HTTP GET request
+      String response = http.getString();
-      int httpResponseCode = http.GET();
+      debug("http response code: " + String(httpResponseCode) + " = " + response);
-
+      // TODO handle response
-      if (httpResponseCode > 0) {
-        String response = http.getString();
-        debug("http response code: " + String(httpResponseCode) + " = " + response);
-        // TODO handle response
-      }
-
-      http.end();
-      debug("Called windspeed exceed callout");
-      digitalWrite(STATUS_LED_PIN, LOW);
     }
 
+    http.end();
+    debug("Called windspeed exceed callout");
+    digitalWrite(STATUS_LED_PIN, LOW);
+  }
+
 #ifdef WEBUPDATER_FEATURE
-    setSensorData(currentSensorData);
+  setSensorData(currentSensorData);
 #endif
 
-  } else {
-    currentSensorData[SENSOR_WINDSPEED] = nan("no value");
-  }
 }
 
 //*************************************************************************//