firmware/config.h

@@ -13,7 +13,7 @@
 #define RESET_ESP_TIME_INTERVAL_MS   (60*60*12*1000) // reset every 12 hours
 #define WIND_SENSOR_MEAS_TIME_S          15
 #define WATCHDOG_TIMEOUT_MS           30000
-#define WIFI_CHECK_INTERVAL_MS        60000
+#define WIFI_CHECK_INTERVAL_MS       600000
 
 #define ENERGY_SAVING_ITERATIONS         30
 

firmware/firmware.ino

@@ -35,17 +35,18 @@ float (*sensors[VALUES])() = {};
 uint32_t update_sensor_cnt           = 0;
 uint32_t update_webserver_cnt        = 0;
 uint32_t update_windspeed_exceed_cnt = 0;
+uint32_t wifi_check_interval_counter = 0;
 
 const String wifiName = "oko-weather-" + DEVICE_NAME;
 
-uint32_t wifi_check_interval_counter = millis();
-
 WiFiManager wifiManager;
 
 uint8_t fsm_state = FSM_STATE_WU;
 
 uint8_t sensor_cnt = 0;
 
+boolean validData = false;
+
 //*************************************************************************//
 
 void debug(String x)
@@ -173,7 +174,7 @@ void initSensors()
 void wifiConnectionCheck()
 {
 
-  if (wifi_check_interval_counter + WIFI_CHECK_INTERVAL_MS > millis() or WiFi.status() == WL_CONNECTED)
+  if ((wifi_check_interval_counter + WIFI_CHECK_INTERVAL_MS) > millis() or WiFi.status() == WL_CONNECTED)
   {
     // if check interval is not exceeded abort check
     return;
@@ -252,33 +253,22 @@ void loop()
   // Needed to give WIFI time to function properly
   delay(DELAY_LOOP_MS);
 
-  update_sensor_cnt == millis();
-
-#ifdef WEBUPDATER_FEATURE
-  update_webserver_cnt == millis();
-#endif
-
-#ifdef HTTP_CALL_ON_WINDSPEED_EXCEED
-  update_windspeed_exceed_cnt == millis();
-#endif
-
 }
 
 //*************************************************************************//
 
 void _loop()
 {
-  boolean validData = false;
 
   switch (fsm_state)
   {
 
     case FSM_STATE_WU:
-      debug("web updater call if required");
+      //debug("web updater call if required");
 #ifdef WEBUPDATER_FEATURE
-      if (update_webserver_cnt + (UPDATE_WEBSERVER_INTVERVAL_S * 1000) <= millis())
+      if ((update_webserver_cnt + (UPDATE_WEBSERVER_INTVERVAL_S * 1000)) <= millis())
       {
-        debug("web updater call");
+        //debug("web updater call");
         update_webserver_cnt = millis();
         doWebUpdater();
       }
@@ -289,49 +279,20 @@ void _loop()
     case FSM_STATE_WSE:
       debug("wind speed exceeded check if required");
 #ifdef HTTP_CALL_ON_WINDSPEED_EXCEED
-      if (update_windspeed_exceed_cnt + (HTTP_CALL_ON_WINDSPEED_INTERVAL_S * 1000) <= millis())
+      if ((update_windspeed_exceed_cnt + (HTTP_CALL_ON_WINDSPEED_INTERVAL_S * 1000)) <= millis())
       {
-        debug("reading wind sensor because of exceed call functionality");
+        debug("reading wind sensor exceed");
-        if (sensors[SENSOR_WINDSPEED])
+
-        {
-          // read from windspeed sensorSTATUS_LED_PIN
-          digitalWrite(STATUS_LED_PIN, HIGH);
-          currentSensorData[SENSOR_WINDSPEED] = sensors[SENSOR_WINDSPEED]();
-          digitalWrite(STATUS_LED_PIN, LOW);
-    
-          if (currentSensorData[SENSOR_WINDSPEED] >= HTTP_CALL_ON_WINDSPEED_EXCEED_MPS)
-          {
-            digitalWrite(STATUS_LED_PIN, HIGH);
-    
-            // call the url HTTP_CALL_ON_WINDSPEED_URL
-            WiFiClient client;
-            HTTPClient http;
-    
-            http.begin(client, String(HTTP_CALL_ON_WINDSPEED_URL).c_str());
-            // Send HTTP GET request
-            int httpResponseCode = http.GET();
-    
-            if (httpResponseCode > 0) {
-              String response = http.getString();
-              debug("http response code: " + String(httpResponseCode) + " = " + response);
-              // TODO handle response
-            }
-    
-            http.end();
-            debug("Called windspeed exceed callout");
-            digitalWrite(STATUS_LED_PIN, LOW);
-          }
-        } else {
-          currentSensorData[SENSOR_WINDSPEED] = nan("no value");
-        }
         update_windspeed_exceed_cnt = millis();
+
+        readWindSpeedExceed();
       }
 #endif
       fsm_state = FSM_STATE_RS;
       break;
 
     case FSM_STATE_RS:
-      debug("reset time check if required");
+      //debug("reset time check if required");
 #ifdef RESET_ESP_TIME_INTERVAL
       // if millis() reached interval restart ESP
       if (RESET_ESP_TIME_INTERVAL_MS <= millis())
@@ -345,15 +306,15 @@ void _loop()
       break;
 
     case FSM_STATE_WS:
-      debug("disable measure of wind speed if required");
+      //debug("disable measure of wind speed if required");
 #ifdef defined(BATTERY_POWERED) && defined(SENSOR_WIND)
       if (energySavingMode() == 1) {
         // Disable expensive tasks
         sensors[SENSOR_WINDSPEED] = 0;
-        debug("read of wind sensor because of low battery disabled");
+        //debug("read of wind sensor because of low battery disabled");
       } else {
         sensors[SENSOR_WINDSPEED] = &wind_speed;
-        debug("read of wind sensor because of high battery enabled");
+        //debug("read of wind sensor because of high battery enabled");
       }
 #endif
       sensor_cnt = 0;
@@ -361,8 +322,8 @@ void _loop()
       break;
 
     case FSM_STATE_US:
-      debug("read sensor data check");
+      //debug("read sensor data check");
-      if (update_sensor_cnt + (UPDATE_SENSOR_INTERVAL_S * 1000) <= millis())
+      if ((update_sensor_cnt + (UPDATE_SENSOR_INTERVAL_S * 1000)) <= millis())
       {
         debug("read sensor data " + String(sensor_cnt));
         if (sensors[sensor_cnt]) {
@@ -401,11 +362,15 @@ void _loop()
       {
         if (currentSensorData[i] != 0)
         {
-          // send data only if valid data is available
-          pushToInfluxDB(DEVICE_NAME, currentSensorData);
           validData = true;
         }
       }
+
+      if (validData == true)
+      {
+        // send data only if valid data is available
+        pushToInfluxDB(DEVICE_NAME, currentSensorData);
+      }
 #endif
       fsm_state = FSM_STATE_SD;
       break;
@@ -427,12 +392,52 @@ void _loop()
   //delay(100); // TODO warum hier ein delay?
 
   //debug("FSM state = " + String(fsm_state));
-  if (fsm_state == FSM_STATE_WU)
+  /*if (fsm_state == FSM_STATE_WU)
   {
     debug("----------");
+  }*/
+}
+
+//*************************************************************************//
+
+void readWindSpeedExceed()
+{
+  if (sensors[SENSOR_WINDSPEED])
+  {
+    // read from windspeed sensorSTATUS_LED_PIN
+    digitalWrite(STATUS_LED_PIN, HIGH);
+    currentSensorData[SENSOR_WINDSPEED] = sensors[SENSOR_WINDSPEED]();
+    digitalWrite(STATUS_LED_PIN, LOW);
+
+    if (currentSensorData[SENSOR_WINDSPEED] >= HTTP_CALL_ON_WINDSPEED_EXCEED_MPS)
+    {
+      digitalWrite(STATUS_LED_PIN, HIGH);
+
+      // call the url HTTP_CALL_ON_WINDSPEED_URL
+      WiFiClient client;
+      HTTPClient http;
+
+      http.begin(client, String(HTTP_CALL_ON_WINDSPEED_URL).c_str());
+      // Send HTTP GET request
+      int httpResponseCode = http.GET();
+
+      if (httpResponseCode > 0) {
+        String response = http.getString();
+        debug("http response code: " + String(httpResponseCode) + " = " + response);
+        // TODO handle response
+      }
+
+      http.end();
+      debug("Called windspeed exceed callout");
+      digitalWrite(STATUS_LED_PIN, LOW);
+    }
+  } else {
+    currentSensorData[SENSOR_WINDSPEED] = nan("no value");
   }
 }
 
+//*************************************************************************//
+
 void logToSerial(float sensorValues[])
 {
   Serial.println("");
@@ -446,3 +451,5 @@ void logToSerial(float sensorValues[])
   Serial.println("Bat charge state: " + String(sensorValues[SENSOR_BATCHARGESTATE]));
   Serial.println("Energy saving: " + String(sensorValues[SENSOR_ESAVEMODE]));
 }
+
+//*************************************************************************//

firmware/webUpdater.ino

@@ -101,7 +101,7 @@ void showHTMLMain(void)
 #ifdef HOMEBRIDGE_WEBSTAT
 "<br><a href=\"http://" + _webUpdater_ip + ":8080/hbWebstat\">homebridge websatt</a><br>"
 #endif
-"<table>"
+"<br><br><table>"
 TR_TD_START_STR + "temperature"   + TD_TD_MID_STR + String(_webUpdater_sensValues[SENSOR_TEMPERATURE]) + TR_TD_END_STR
 TR_TD_START_STR + "humidity"      + TD_TD_MID_STR + String(_webUpdater_sensValues[SENSOR_HUMIDITY])    + TR_TD_END_STR
 TR_TD_START_STR + "light"         + TD_TD_MID_STR + String(_webUpdater_sensValues[SENSOR_LIGHT])       + TR_TD_END_STR