firmware/config.h

@@ -10,7 +10,7 @@
 #define DELAY_LOOP_MS                    50
 #define POWERSAVING_SLEEP_S             600
 #define EMERGENCY_SLEEP_S            172800 // Sleep for 2 days to recover
-#define RESET_ESP_TIME_INTERVAL_MS   (60*60*3*1000) // (60*60*6*1000) // reset every 3 hours
+#define RESET_ESP_TIME_INTERVAL_MS   (60*60*12*1000) // reset every 12 hours
 #define WIND_SENSOR_MEAS_TIME_S          15
 #define INITIAL_WEBSERVER_TIME           20
 

firmware/config_user.h.example

@@ -13,7 +13,6 @@
 String DEVICE_NAME = "weatherstation";
 
 // Enable/Disable features
-//#define WEBUPDATER_FEATURE
 #define INFLUXDB_FEATURE
 #define INFLUXDB_VERSION 1 // 1 or 2
 #define SERIAL_FEATURE

firmware/firmware.ino

@@ -27,7 +27,9 @@
 // constant variables
 
 const uint8_t VALUES = 8; // see constants.h file - count of number of SENSOR_ defines
-float currentSensorData[VALUES] = {nanf("no value"), nanf("no value"), nanf("no value"), nanf("no value"), nanf("no value"), nanf("no value"), nanf("no value"), nanf("no value")};
+float currentSensorData[VALUES] = { nanf("no value"), nanf("no value"), nanf("no value"),
+                                    nanf("no value"), nanf("no value"), nanf("no value"),
+                                    nanf("no value"), nanf("no value") };
 float (*sensors[VALUES])() = {};
 
 uint16_t update_sensor_cnt           = 0;
@@ -36,8 +38,26 @@ uint16_t update_windspeed_exceed_cnt = 0;
 
 boolean validData = false;
 
+const String wifiName = "oko-weather-" + DEVICE_NAME;
+
+uint32_t wifi_check_interval_counter = millis();
+
 WiFiManager wifiManager;
 
+typedef enum fsm_states_et {
+  FSM_STATE_WU,
+  FSM_STATE_WSE,
+  FSM_STATE_RS,
+  FSM_STATE_BP,
+  FSM_STATE_WS,
+  FSM_STATE_US,
+  FSM_STATE_SC,
+  FSM_STATE_ID,
+  FSM_STATE_SD
+} t_fsm_states;
+
+t_fsm_states fsm_state = FSM_STATE_WU;
+
 //*************************************************************************//
 
 void debug(String x)
@@ -47,6 +67,8 @@ void debug(String x)
 #endif
 }
 
+//*************************************************************************//
+
 void setup()
 {
 
@@ -73,13 +95,54 @@ void setup()
   criticalBatCheck();
 #endif
 
-  wifiConnectionCheck();
+  wifiConnect();
   debug("Connected!");
 
 #ifdef INFLUXDB_FEATURE
   influxdb_begin();
 #endif
 
+  initSensors();
+
+#ifdef WEBUPDATER_FEATURE
+#ifndef BATTERY_POWERED
+  setupWebUpdater(DEVICE_NAME, WiFi.localIP().toString());
+#endif
+#endif
+
+  //It's magic! leave in
+  delay(100);
+
+#ifdef BATTERY_POWERED
+  debug("battery powered");
+  _loop();
+
+  digitalWrite(STATUS_LED_PIN, LOW);
+
+  criticalBatCheck();
+
+  WiFi.mode(WIFI_OFF);
+  WiFi.forceSleepBegin();
+
+  debug("deep sleep");
+
+  // the ESP.deepSleep requires microseconds as input, after the
+  // sleep the system will run into the setup routine
+  ESP.deepSleep(POWERSAVING_SLEEP_S * 1000000, WAKE_RF_DEFAULT);
+  delay(100);
+#endif
+
+#ifdef ENABLE_WATCHDOG
+  // Enable the internal watchdog
+  ESP.wdtEnable(WATCHDOG_TIMEOUT_MS);
+#endif
+
+}
+
+//*************************************************************************//
+
+void initSensors()
+{
   // Initialize and configure the sensors
 #ifdef SENSOR_APDS9930
   if (sensor_apds9930_begin()) {
@@ -111,47 +174,29 @@ void setup()
   sensors[SENSOR_BATCHARGESTATE] = &battery_charging;
   sensors[SENSOR_ESAVEMODE] = &isEnergySavingMode;
 #endif
-
-#ifdef WEBUPDATER_FEATURE
-#ifndef BATTERY_POWERED
-  setupWebUpdater(DEVICE_NAME, WiFi.localIP().toString());
-#endif
-#endif
-
-  //It's magic! leave in
-  delay(100);
-
-#ifdef BATTERY_POWERED
-  debug("battery powered");
-  _loop();
-
-  digitalWrite(STATUS_LED_PIN, LOW);
-
-  criticalBatCheck();
-
-  WiFi.mode(WIFI_OFF);
-  WiFi.forceSleepBegin();
-
-  debug("deep sleep");
-
-  // the ESP.deepSleep requires microseconds as input, after the sleep the system will run into the setup routine
-  ESP.deepSleep(POWERSAVING_SLEEP_S * 1000000, WAKE_RF_DEFAULT);
-  delay(100);
-#endif
-
-#ifdef ENABLE_WATCHDOG
-  // Enable the internal watchdog
-  ESP.wdtEnable(WATCHDOG_TIMEOUT_MS);
-#endif
-
 }
 
 //*************************************************************************//
 
 void wifiConnectionCheck()
 {
-  // Establish WiFi connection
+
-  String wifiName = "oko-weather-" + DEVICE_NAME;
+  if (millis() - wifi_check_interval_counter < WIFI_CHECK_INVERVAL_MS)
+  {
+    // if check interval is not exceeded abort check
+    return;
+  }
+
+  wifi_check_interval_counter = millis();
+
+  wifiConnect();
+
+}
+
+void wifiConnect()
+{
+
+  // Establish WiFi connection if not already applied
 
   wifiManager.setMinimumSignalQuality(WIFI_MINIMUM_SIGNAL_QUALITY);
   // the time in seconds to wait for the known wifi connection
@@ -161,7 +206,6 @@ void wifiConnectionCheck()
 
   while (!wifiManager.autoConnect(wifiName.c_str(), "DEADBEEF"))
   {
-    debug("WiFi connection failed, try again in 5 seconds...");
     // If autoconnect to WLAN failed and no client connected, go to deep sleep
 #ifdef SLEEP_IF_NO_WLAN_CONNECTION
     ESP.deepSleep(POWERSAVING_SLEEP_S * 1000000, WAKE_RF_DEFAULT);
@@ -169,6 +213,7 @@ void wifiConnectionCheck()
 #endif
 #ifndef SLEEP_IF_NO_WLAN_CONNECTION
     // sleep a few seconds and go on trying to connect
+    debug("WiFi connection failed, try again in 5 seconds...");
     delay(5000);
 #endif
   }
@@ -191,6 +236,8 @@ void criticalBatCheck()
 }
 #endif
 
+//*************************************************************************//
+
 void loop()
 {
 
@@ -223,122 +270,158 @@ void loop()
 
 }
 
+//*************************************************************************//
+
 void _loop()
 {
 
+  switch (fsm_state)
+  {
+
+    case FSM_STATE_WU:
 #ifdef WEBUPDATER_FEATURE
-  if (UPDATE_WEBSERVER_INTVERVAL_S * 1000 / DELAY_LOOP_MS <= update_webserver_cnt)
+      if (UPDATE_WEBSERVER_INTVERVAL_S * 1000 / DELAY_LOOP_MS <= update_webserver_cnt)
-  {
-    update_webserver_cnt = 0;
-    doWebUpdater();
-  }
-#endif
-
-#ifdef HTTP_CALL_ON_WINDSPEED_EXCEED
-  if (HTTP_CALL_ON_WINDSPEED_INTERVAL_S * 1000 / DELAY_LOOP_MS <= update_windspeed_exceed_cnt)
-  {
-    debug("Reading wind sensor because of exceed call functionality");
-    if (sensors[SENSOR_WINDSPEED])
-    {
-      // read from windspeed sensorSTATUS_LED_PIN
-      digitalWrite(STATUS_LED_PIN, HIGH);
-      currentSensorData[SENSOR_WINDSPEED] = sensors[SENSOR_WINDSPEED]();
-      digitalWrite(STATUS_LED_PIN, LOW);
-
-      if (currentSensorData[SENSOR_WINDSPEED] >= HTTP_CALL_ON_WINDSPEED_EXCEED_MPS)
       {
-        digitalWrite(STATUS_LED_PIN, HIGH);
+        update_webserver_cnt = 0;
-
+        doWebUpdater();
-        // call the url HTTP_CALL_ON_WINDSPEED_URL
-        WiFiClient client;
-        HTTPClient http;
-
-        http.begin(client, String(HTTP_CALL_ON_WINDSPEED_URL).c_str());
-        // Send HTTP GET request
-        int httpResponseCode = http.GET();
-
-        if (httpResponseCode > 0) {
-          String response = http.getString();
-#ifdef DEBUG
-          Serial.println("http response code: " + String(httpResponseCode) + " = " + response);
-#endif
-          // TODO handle response
-        }
-
-        http.end();
-        debug("Called windspeed exceed callout");
-        digitalWrite(STATUS_LED_PIN, LOW);
       }
-    } else {
-      currentSensorData[SENSOR_WINDSPEED] = nan("no value");
-    }
-    update_windspeed_exceed_cnt = 0;
-  }
 #endif
+      fsm_state = FSM_STATE_WSE;
+      break;
 
+    case FSM_STATE_WSE:
+#ifdef HTTP_CALL_ON_WINDSPEED_EXCEED
+      if (HTTP_CALL_ON_WINDSPEED_INTERVAL_S * 1000 / DELAY_LOOP_MS <= update_windspeed_exceed_cnt)
+      {
+        debug("Reading wind sensor because of exceed call functionality");
+        if (sensors[SENSOR_WINDSPEED])
+        {
+          // read from windspeed sensorSTATUS_LED_PIN
+          digitalWrite(STATUS_LED_PIN, HIGH);
+          currentSensorData[SENSOR_WINDSPEED] = sensors[SENSOR_WINDSPEED]();
+          digitalWrite(STATUS_LED_PIN, LOW);
+    
+          if (currentSensorData[SENSOR_WINDSPEED] >= HTTP_CALL_ON_WINDSPEED_EXCEED_MPS)
+          {
+            digitalWrite(STATUS_LED_PIN, HIGH);
+    
+            // call the url HTTP_CALL_ON_WINDSPEED_URL
+            WiFiClient client;
+            HTTPClient http;
+    
+            http.begin(client, String(HTTP_CALL_ON_WINDSPEED_URL).c_str());
+            // Send HTTP GET request
+            int httpResponseCode = http.GET();
+    
+            if (httpResponseCode > 0) {
+              String response = http.getString();
+#ifdef DEBUG
+              Serial.println("http response code: " + String(httpResponseCode) + " = " + response);
+#endif
+              // TODO handle response
+            }
+    
+            http.end();
+            debug("Called windspeed exceed callout");
+            digitalWrite(STATUS_LED_PIN, LOW);
+          }
+        } else {
+          currentSensorData[SENSOR_WINDSPEED] = nan("no value");
+        }
+        update_windspeed_exceed_cnt = 0;
+      }
+#endif
+      fsm_state = FSM_STATE_RS;
+      break;
+
+    case FSM_STATE_RS:
 #ifdef RESET_ESP_TIME_INTERVAL
-  // if millis() reached interval restart ESP
+      // if millis() reached interval restart ESP
-  if (RESET_ESP_TIME_INTERVAL_MS <= millis())
+      if (RESET_ESP_TIME_INTERVAL_MS <= millis())
-  {
+      {
-    debug("Resetting firmware intentionally");
+        debug("Resetting firmware intentionally");
-    // Push reset button after flashing once or do a manual power cycle to get the functionality working.
+        // Push reset button after flashing once or do a manual power cycle to get the functionality working.
-    ESP.restart();
+        ESP.restart();
-  }
+      }
 #endif
+      fsm_state = FSM_STATE_BP;
+      break;
 
+    case FSM_STATE_BP:
 #ifndef BATTERY_POWERED
-  if (UPDATE_SENSOR_INTERVAL_S * 1000 / DELAY_LOOP_MS > update_sensor_cnt)
+      if (UPDATE_SENSOR_INTERVAL_S * 1000 / DELAY_LOOP_MS > update_sensor_cnt)
-  {
+      {
-    return;
+        return;
-  }
+      }
 #endif
+      fsm_state = FSM_STATE_WS;
+      break;
 
+    case FSM_STATE_WS:
 #ifdef defined(BATTERY_POWERED) && defined(SENSOR_WIND)
-  if (energySavingMode() == 1) {
+      if (energySavingMode() == 1) {
-    // Disable expensive tasks
+        // Disable expensive tasks
-    sensors[SENSOR_WINDSPEED] = 0;
+        sensors[SENSOR_WINDSPEED] = 0;
-  } else {
+      } else {
-    sensors[SENSOR_WINDSPEED] = &wind_speed;
+        sensors[SENSOR_WINDSPEED] = &wind_speed;
-  }
+      }
 #endif
+      fsm_state = FSM_STATE_US;
+      break;
 
-  update_sensor_cnt = 0;
+    case FSM_STATE_US:
-  for (uint8_t i = 0; i < VALUES; i++)
+      update_sensor_cnt = 0;
-  {
+      for (uint8_t i = 0; i < VALUES; i++)
-    if (sensors[i]) {
+      {
-      currentSensorData[i] = sensors[i]();
+        if (sensors[i]) {
-    } else {
+          currentSensorData[i] = sensors[i]();
-      currentSensorData[i] = nan("no value");
+        } else {
-    }
+          currentSensorData[i] = nan("no value");
-  }
+        }
+      }
+      fsm_state = FSM_STATE_SC;
+      break;
 
+    case FSM_STATE_SC:
 #ifdef SERIAL_FEATURE
-  logToSerial(currentSensorData);
+      logToSerial(currentSensorData);
 #endif
+      fsm_state = FSM_STATE_ID;
+      break;
 
-  delay(100);
+  //delay(100); // TODO warum?
 
+    case FSM_STATE_ID:
 #ifdef INFLUXDB_FEATURE
+      for (uint8_t i = 0; i < 5 and validData == false; i++)
+      {
+        if (currentSensorData[i] != 0)
+        {
+          validData = true; // at least one value is not zero, the data
+        }
+      }
     
-  for (uint8_t i = 0; i < 5 and validData == false; i++)
+      if (validData == true)
-  {
+      {
-    if (currentSensorData[i] != 0)
+        // send data only if valid data is available
-    {
+        pushToInfluxDB(DEVICE_NAME, currentSensorData);
-      validData = true; // at least one value is not zero, the data
+      }
-    }
-  }
-
-  if (validData == true)
-  {
-    // send data only if valid data is available
-    pushToInfluxDB(DEVICE_NAME, currentSensorData);
-  }
 #endif
+      fsm_state = FSM_STATE_SD;
+      break;
 
+    case FSM_STATE_SD:
 #ifdef WEBUPDATER_FEATURE
-  setSensorData(currentSensorData);
+      setSensorData(currentSensorData);
 #endif
+      fsm_state = FSM_STATE_WU;
+      break;
 
+    default:
+      fsm_state = FSM_STATE_WU;
+      break;
+
+  } // close of switch
 }
 
 void logToSerial(float sensorValues[])

firmware/influxdb.ino

@@ -7,6 +7,8 @@
 
 Influxdb _influxdb(INFLUXDB_HOST, INFLUXDB_PORT);
 
+const String msg = "weather,device=" + device + " ";
+
 void influxdb_begin() {
   // Init variables to influxdb config - doesn't talk to database
   _influxdb.opendb(INFLUXDB_DB, INFLUXDB_USER, INFLUXDB_PASS);
@@ -16,7 +18,6 @@ void pushToInfluxDB(String device, float sensorValues[]) {
   uint8_t tries = 0;
   boolean addComma = false;
 
-  String msg = "weather,device=" + device + " ";
   if (!(isnan(sensorValues[SENSOR_TEMPERATURE])))
   {
     msg += "temperature=" + String(sensorValues[SENSOR_TEMPERATURE]);
@@ -172,7 +173,8 @@ void pushToInfluxDB(String device, float sensorValues[]) {
 
 }
 
-void _writePoint() {
+void _writePoint()
+{
 
   // wait unitl ready
   do {

firmware/webUpdater.ino

@@ -23,15 +23,19 @@ String _webUpdater_ip = "127.0.0.1";
 String _webUpdater_dev = "unknown";
 float  _webUpdater_sensValues[VALUES];
 
-String hb_ws_msg_start     = "{";
+const String hb_ws_msg_start     = "{";
-String hb_ws_msg_temp      = "\"temperature\": ";
+const String hb_ws_msg_temp      = "\"temperature\": ";
-String hb_ws_msg_humi      = "\"humidity\": ";
+const String hb_ws_msg_humi      = "\"humidity\": ";
-String hb_ws_msg_light     = "\"lightlevel\": ";
+const String hb_ws_msg_light     = "\"lightlevel\": ";
-String hb_ws_msg_windspeed = "\"windspeed\": ";
+const String hb_ws_msg_windspeed = "\"windspeed\": ";
-String hb_ws_msg_pressure  = "\"pressure\": ";
+const String hb_ws_msg_pressure  = "\"pressure\": ";
-String hb_ws_msg_timestamp = "\"timestamp\": ";
+const String hb_ws_msg_timestamp = "\"timestamp\": ";
-String hb_ws_msg_valid     = "\"valid\": ";
+const String hb_ws_msg_valid     = "\"valid\": ";
-String hb_ws_msg_end       = "}";
+const String hb_ws_msg_end       = "}";
+
+#define TR_TD_START_STR "<tr><td>"
+#define TR_TD_END_STR   "</td></tr>"
+#define TD_TD_MID_STR   "</td><td>"
 
 boolean wuValidData = false;
 
@@ -87,20 +91,22 @@ void showHTMLMain(void)
 "</head><body>"
 "<br><a href=\"http://" + _webUpdater_ip + ":8080/update\">firmware update</a><br><br>"
 "<table>"
-"<tr><td>temperature</td><td>" + String(_webUpdater_sensValues[SENSOR_TEMPERATURE]) + "</td></tr>"
+TR_TD_START_STR + "temperature"   + TD_TD_MID_STR + String(_webUpdater_sensValues[SENSOR_TEMPERATURE]) + TR_TD_END_STR
-"<tr><td>humidity</td><td>" + String(_webUpdater_sensValues[SENSOR_HUMIDITY]) + "</td></tr>"
+TR_TD_START_STR + "humidity"      + TD_TD_MID_STR + String(_webUpdater_sensValues[SENSOR_HUMIDITY])    + TR_TD_END_STR
-"<tr><td>light</td><td>" + String(_webUpdater_sensValues[SENSOR_LIGHT]) + "</td></tr>"
+TR_TD_START_STR + "light"         + TD_TD_MID_STR + String(_webUpdater_sensValues[SENSOR_LIGHT])       + TR_TD_END_STR
-"<tr><td>windspeed</td><td>" + String(_webUpdater_sensValues[SENSOR_WINDSPEED]) + "</td></tr>"
+TR_TD_START_STR + "windspeed"     + TD_TD_MID_STR + String(_webUpdater_sensValues[SENSOR_WINDSPEED])   + TR_TD_END_STR
-"<tr><td>pressure</td><td>" + String(_webUpdater_sensValues[SENSOR_PRESSURE]) + "</td></tr>"
+TR_TD_START_STR + "pressure"      + TD_TD_MID_STR + String(_webUpdater_sensValues[SENSOR_PRESSURE])    + TR_TD_END_STR
-"<tr><td>batvoltage</td><td>" + String(_webUpdater_sensValues[SENSOR_BAT_VOLTAGE]) + "</td></tr>"
+TR_TD_START_STR + "batvoltage"    + TD_TD_MID_STR + String(_webUpdater_sensValues[SENSOR_BAT_VOLTAGE]) + TR_TD_END_STR
-"<tr><td>millis</td><td>" + String(millis()) + "</td></tr>"
+TR_TD_START_STR + "millis"        + TD_TD_MID_STR + String(millis())                                   + TR_TD_END_STR
-"<tr><td>valid</td><td>" + String(wuValidData) + "</td></tr>"
+TR_TD_START_STR + "valid"         + TD_TD_MID_STR + String(wuValidData)                                + TR_TD_END_STR
+TR_TD_START_STR + "wifi rssi"     + TD_TD_MID_STR + WiFi.RSSI()                                        + TR_TD_END_STR
 "</table>"
 "</body></html>";
 
   httpServer.send(200, "text/html", message);
 }
 
+#ifdef HOMEBRIDGE_WEBSTAT
 void hb_webstat_send(void)
 {
   String msg = hb_ws_msg_start +
@@ -128,6 +134,7 @@ void hb_webstat_send(void)
 
   httpServer.send(200, "text/html", msg);
 }
+#endif
 
 void resetWifiManager()
 {
@@ -151,6 +158,8 @@ void resetWifiManager()
   ESP.restart();
 }
 
+#ifdef DEBUG_WINDSPEED_MEASUREMENT
+#ifdef SENSOR_WIND
 void measureWindspeed()
 {
 
@@ -168,3 +177,5 @@ void measureWindspeed()
   httpServer.send(200, "text/html", message);
 
 }
+#endif
+#endif