#include #include #include #include // WiFiManager #include // https://github.com/hwwong/ESP8266Influxdb auchecken und den ordner in das arduino\library verzeichnis kopieren #include // PAckage Adafruit Unified Sensor #include // Adafruit APDS9960 - https://www.makerfabs.com/index.php?route=product/product&product_id=281 #include // BME280 - https://www.roboter-bausatz.de/1704/bmp280-barometer-luftdrucksensor?gclid=EAIaIQobChMIlpumj8Hp2wIVFWYbCh01PgmFEAQYAyABEgIwBvD_BwE #include "config.h" /** <<<<<<< HEAD Whishlist: - Webserver for /metrics endpoint (Prometheus) - Show current sensor values over simple webpage - Push sensor values to various 3rd party services (https://openweathermap.org/) - MQTT? - Buffer sensor values if there is no WIFI connection - Configure weather station over http webinterface - OTA firmware update TODO: - https://sminghub.github.io/Sming/about/ - https://github.com/marvinroger/homie-esp8266 */ ======= * Whishlist: * - Webserver for /metrics endpoint (Prometheus) * - Show current sensor values over simple webpage * - Push sensor values to various 3rd party services (https://openweathermap.org/) * - MQTT? * * - Buffer sensor values if there is no WIFI connection * - Configure weather station over http webinterface * - OTA firmware update * * TODO: * - https://sminghub.github.io/Sming/about/ * - https://github.com/marvinroger/homie-esp8266 */ >>>>>>> d5aee1ca54127dd46df8934c2512bcf1b9cc1bfa float currentSensorData[5] = {0.0, 0.0, 0.0, 0.0, 0.0}; WiFiManager wifiManager; Influxdb influxdb(INFLUXDB_HOST, INFLUXDB_PORT); Adafruit_APDS9960 apds; Adafruit_BME280 bme; void setup() { #ifdef DEBUG Serial.begin(115200); #endif //WiFi.disconnect(); // enable to remove the wifi credentials // Pin settings pinMode(STATUS_LED_PIN, OUTPUT); //pinMode(ANEMOMETER_PIN, INPUT_PULLUP); // Establish WiFi connection String wifiName = "oko-weather-" + String(ESP.getChipId()); wifiManager.setMinimumSignalQuality(15); if (!wifiManager.autoConnect(wifiName.c_str(), "DEADBEEF")) { #ifdef DEBUG Serial.println("WiFi connection failed, we reboot ..."); #endif ESP.reset(); delay(1000); } #ifdef DEBUG Serial.println("Connected!"); #endif // Open the InfluxDB session influxdb.opendb(INFLUXDB_DB, INFLUXDB_USER, INFLUXDB_PASS); // Initialize and configure the sensors apds.begin(); apds.enableColor(true); bool status = bme.begin(0x76); if (!status) { Serial.println("Could not find a valid BME280 sensor, check wiring!"); while (1); } delay(100); } void loop() { digitalWrite(STATUS_LED_PIN, LOW); #ifdef DEBUG Serial.println("---"); digitalWrite(STATUS_LED_PIN, HIGH); #endif currentSensorData[SENSOR_TEMPERATURE] = fetchTemperature(); <<<<<<< HEAD currentSensorData[SENSOR_HUMIDITY] = fetchHumidity(); currentSensorData[SENSOR_LIGHT] = fetchLight(); currentSensorData[SENSOR_WINDSPEED] = fetchWindspeed(); currentSensorData[SENSOR_PRESSURE] = fetchPressure(); #ifdef DEBUG Serial.println(""); Serial.println("Current readings:"); Serial.println("Temperature: " + String(currentSensorData[SENSOR_TEMPERATURE]) + " °C"); Serial.println("Humidity: " + String(currentSensorData[SENSOR_HUMIDITY]) + " %"); Serial.println("Light: " + String(currentSensorData[SENSOR_LIGHT]) + " Lumen"); Serial.println("Windspeed: " + String(currentSensorData[SENSOR_WINDSPEED]) + " km/h"); Serial.println("Pressure: " + String(currentSensorData[SENSOR_PRESSURE]) + " hPa"); #endif pushToInfluxDB(DEVICE_NAME, currentSensorData); delay(UPDATE_INTERVAL * 1000); } ======= Serial.print("*"); currentSensorData[SENSOR_HUMIDITY] = fetchHumidity(); Serial.print("*"); currentSensorData[SENSOR_LIGHT] = fetchLight(); Serial.print("*"); currentSensorData[SENSOR_WINDSPEED] = fetchWindspeed(); Serial.print("*"); currentSensorData[SENSOR_PRESSURE] = fetchPressure(); Serial.println("*"); #ifdef DEBUG Serial.println(""); Serial.println("Current readings:"); Serial.println("Temperature: " + String(currentSensorData[SENSOR_TEMPERATURE]) + " °C"); Serial.println("Humidity: " + String(currentSensorData[SENSOR_HUMIDITY]) + " %"); Serial.println("Light: " + String(currentSensorData[SENSOR_LIGHT]) + " Lumen"); Serial.println("Windspeed: " + String(currentSensorData[SENSOR_WINDSPEED]) + " Km/h"); Serial.println("Pressure: " + String(currentSensorData[SENSOR_PRESSURE]) + " hPa"); #endif pushToInfluxDB(DEVICE_NAME, currentSensorData); delay(UPDATE_INTERVAL*1000); } >>>>>>> d5aee1ca54127dd46df8934c2512bcf1b9cc1bfa