#include <ESP8266WiFi.h>
#include <DNSServer.h>
#include <ESP8266WebServer.h>
#include <WiFiManager.h>       // WiFiManager
#include <ESP8266Influxdb.h>   // https://github.com/hwwong/ESP8266Influxdb auchecken und den ordner in das arduino\library verzeichnis kopieren
#include <Adafruit_Sensor.h>   // PAckage Adafruit Unified Sensor
#include <Adafruit_APDS9960.h> // Adafruit APDS9960 - https://www.makerfabs.com/index.php?route=product/product&product_id=281
#include <Adafruit_BME280.h>   // BME280 - https://www.roboter-bausatz.de/1704/bmp280-barometer-luftdrucksensor?gclid=EAIaIQobChMIlpumj8Hp2wIVFWYbCh01PgmFEAQYAyABEgIwBvD_BwE

#include "config.h"

/**
   Whishlist:
   - Webserver for /metrics endpoint (Prometheus)
   - Show current sensor values over simple webpage
   - Push sensor values to various 3rd party services (https://openweathermap.org/)
   - MQTT?

   - Buffer sensor values if there is no WIFI connection
   - Configure weather station over http webinterface
   - OTA firmware update

   TODO:
   - https://sminghub.github.io/Sming/about/
   - https://github.com/marvinroger/homie-esp8266
*/

float currentSensorData[5] = {0.0, 0.0, 0.0, 0.0, 0.0};


WiFiManager wifiManager;
Influxdb influxdb(INFLUXDB_HOST, INFLUXDB_PORT);
Adafruit_APDS9960 apds;
Adafruit_BME280 bme;

void setup() {

#ifdef DEBUG
  Serial.begin(115200);
#endif

  //WiFi.disconnect(); // enable to remove the wifi credentials

  // Pin settings
  pinMode(STATUS_LED_PIN, OUTPUT);
  pinMode(ANEMOMETER_PIN, INPUT_PULLUP);

  // Establish WiFi connection
  String wifiName = "oko-weather-" + String(ESP.getChipId());
  wifiManager.setMinimumSignalQuality(15);
  if (!wifiManager.autoConnect(wifiName.c_str(), "DEADBEEF")) {
#ifdef DEBUG
    Serial.println("WiFi connection failed, we reboot ...");
#endif
    ESP.reset();
    delay(1000);
  }

#ifdef DEBUG
  Serial.println("Connected!");
#endif

  // Open the InfluxDB session
  influxdb.opendb(INFLUXDB_DB, INFLUXDB_USER, INFLUXDB_PASS);

  // Initialize and configure the sensors
  apds.begin();
  apds.enableColor(true);

  bool status = bme.begin(0x76);
  if (!status) {
    Serial.println("Could not find a valid BME280 sensor, check wiring!");
    while (1);
  }

  delay(100);
}

void loop() {

  digitalWrite(STATUS_LED_PIN, LOW);

#ifdef DEBUG
  Serial.println("---");
  digitalWrite(STATUS_LED_PIN, HIGH);
#endif
  currentSensorData[SENSOR_TEMPERATURE] = fetchTemperature();
  currentSensorData[SENSOR_HUMIDITY]    = fetchHumidity();
  currentSensorData[SENSOR_LIGHT]       = fetchLight();
  currentSensorData[SENSOR_WINDSPEED]   = fetchWindspeed();
  currentSensorData[SENSOR_PRESSURE]    = fetchPressure();

#ifdef DEBUG
  Serial.println("");
  Serial.println("Current readings:");
  Serial.println("Temperature: " + String(currentSensorData[SENSOR_TEMPERATURE]) + " °C");
  Serial.println("Humidity: " + String(currentSensorData[SENSOR_HUMIDITY]) + " %");
  Serial.println("Light: " + String(currentSensorData[SENSOR_LIGHT]) + " Lumen");
  Serial.println("Windspeed: " + String(currentSensorData[SENSOR_WINDSPEED]) + " km/h");
  Serial.println("Pressure: " + String(currentSensorData[SENSOR_PRESSURE]) + " hPa");
#endif

  pushToInfluxDB(DEVICE_NAME, currentSensorData);

  delay(UPDATE_INTERVAL * 1000);
}