esphome:
  name: weatherstation
  platform: ESP8266
  board: d1_mini

i2c:
  - id: bus_a
    sda: 4 # D2
    scl: 5 # D1
    scan: true

apds9960:
    address: 0x39
    update_interval: 300s

sensor:
  #
  #################### wind sensor
  - platform: pulse_counter
    pin: 
      # pin D8
      number: GPIO15
      mode: INPUT_PULLUP # TODO check if required
    unit_of_measurement: 'm/s' ##change to m/s if metric
    name: 'wind_speed'
    icon: 'mdi:weather-windy'
    id: my_wind
    count_mode:
      rising_edge: DISABLE
      falling_edge: INCREMENT
    internal_filter: 50us
    update_interval: 300s 
    #rotations_per_sec = pulses/2/60
    #circ_m=0.09*2*3.14 = 0.5652
    #mps = 1.18*circ_m*rotations_per_sec
    #mps = 1.18*0.5652/2/60 =0,0055578
    filters:
      - multiply: 0.0055578 #use for m/s
      # - multiply: 2.237 #m/s to mph
      # - sliding_window_moving_average:
      #     window_size: 4
      #     send_every: 1
      #- multiply: 0.04973 #1.492mph switch to close 1/sec per spec, pulse/sec (/60/2)*1.492
      #- multiply: 0.0124327986 #m/s * mph conversion

  #################### apds9960 sensor i2c
  - platform: apds9960
    type: CLEAR
    name: "APDS9960_clear_channel"

  - platform: bme280
    temperature:
      name: "BME280_temperature"
      id: bme280_temperature
    pressure:
      name: "BME280_ressure"
      id: bme280_pressure
    humidity:
      name: "BME280 Relative Humidity"
      id: bme280_humidity
    address: 0x76
    update_interval: 300s

  - platform: template
    name: "altitude"
    lambda: |-
      const float STANDARD_SEA_LEVEL_PRESSURE = 1013.25; //in hPa, see note
      return ((id(bme280_temperature).state + 273.15) / 0.0065) *
        (powf((STANDARD_SEA_LEVEL_PRESSURE / id(bme280_pressure).state), 0.190234) - 1); // in meter
    update_interval: 300s
    icon: 'mdi:signal'
    unit_of_measurement: 'm'

  - platform: template
    name: "absolute_humidity"
    lambda: |-
      const float mw = 18.01534;    // molar mass of water g/mol
      const float r = 8.31447215;   // Universal gas constant J/mol/K
      return (6.112 * powf(2.718281828, (17.67 * id(bme280_temperature).state) /
        (id(bme280_temperature).state + 243.5)) * id(bme280_humidity).state * mw) /
        ((273.15 + id(bme280_temperature).state) * r); // in grams/m^3
    accuracy_decimals: 2
    update_interval: 300s
    icon: 'mdi:water'
    unit_of_measurement: 'g/m³'

  - platform: template
    name: "dew_point"
    lambda: |-
      return (243.5*(log(id(bme280_humidity).state/100)+((17.67*id(bme280_temperature).state)/
      (243.5+id(bme280_temperature).state)))/(17.67-log(id(bme280_humidity).state/100)-
      ((17.67*id(bme280_temperature).state)/(243.5+id(bme280_temperature).state))));
    unit_of_measurement: °C
    update_interval: 300s
    icon: 'mdi:thermometer-alert'

  # battery power adc
  - platform: adc
    pin: A0
    name: "battery_power"
    update_interval: 300s

binary_sensor:
  # battery charged pin
  - platform: gpio
    pin:
      number: 12 # D6
      mode:
        input: true
        pullup: false
    name: "battery_charged"

  # battery charging pin
  - platform: gpio
    pin:
      number: 14 # D5
      mode:
        input: true
        pullup: false
    name: "battery_charging"

time:
  - platform: sntp
    id: my_time

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:
  password: "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"

wifi:
  ssid: UPC4556888
  password: emmydhvZ4faw
  manual_ip:
    # Set this to the IP of the ESP
    static_ip: 192.168.0.91
    # Set this to the IP address of the router. Often ends with .1
    gateway: 192.168.0.1
    # The subnet of the network. 255.255.255.0 works for most home networks.
    subnet: 255.255.255.0
    
captive_portal: