133 lines
4.8 KiB
C++
Executable file
133 lines
4.8 KiB
C++
Executable file
/*
|
|
WiFi Web Server LED Blink
|
|
|
|
A simple web server that lets you blink an LED via the web.
|
|
This sketch will print the IP address of your WiFi Shield (once connected)
|
|
to the Serial monitor. From there, you can open that address in a web browser
|
|
to turn on and off the LED on pin 9.
|
|
|
|
If the IP address of your shield is yourAddress:
|
|
http://yourAddress/H turns the LED on
|
|
http://yourAddress/L turns it off
|
|
|
|
This example is written for a network using WPA encryption. For
|
|
WEP or WPA, change the Wifi.begin() call accordingly.
|
|
|
|
Circuit:
|
|
* WiFi shield attached
|
|
* LED attached to pin 9
|
|
|
|
created 25 Nov 2012
|
|
by Tom Igoe
|
|
*/
|
|
#include <SPI.h>
|
|
#include <WiFi.h>
|
|
|
|
char ssid[] = "yourNetwork"; // your network SSID (name)
|
|
char pass[] = "secretPassword"; // your network password
|
|
int keyIndex = 0; // your network key Index number (needed only for WEP)
|
|
|
|
int status = WL_IDLE_STATUS;
|
|
WiFiServer server(80);
|
|
|
|
void setup() {
|
|
Serial.begin(9600); // initialize serial communication
|
|
pinMode(9, OUTPUT); // set the LED pin mode
|
|
|
|
// check for the presence of the shield:
|
|
if (WiFi.status() == WL_NO_SHIELD) {
|
|
Serial.println("WiFi shield not present");
|
|
while (true); // don't continue
|
|
}
|
|
|
|
String fv = WiFi.firmwareVersion();
|
|
if (fv != "1.1.0") {
|
|
Serial.println("Please upgrade the firmware");
|
|
}
|
|
|
|
// attempt to connect to Wifi network:
|
|
while (status != WL_CONNECTED) {
|
|
Serial.print("Attempting to connect to Network named: ");
|
|
Serial.println(ssid); // print the network name (SSID);
|
|
|
|
// Connect to WPA/WPA2 network. Change this line if using open or WEP network:
|
|
status = WiFi.begin(ssid, pass);
|
|
// wait 10 seconds for connection:
|
|
delay(10000);
|
|
}
|
|
server.begin(); // start the web server on port 80
|
|
printWifiStatus(); // you're connected now, so print out the status
|
|
}
|
|
|
|
|
|
void loop() {
|
|
WiFiClient client = server.available(); // listen for incoming clients
|
|
|
|
if (client) { // if you get a client,
|
|
Serial.println("new client"); // print a message out the serial port
|
|
String currentLine = ""; // make a String to hold incoming data from the client
|
|
while (client.connected()) { // loop while the client's connected
|
|
if (client.available()) { // if there's bytes to read from the client,
|
|
char c = client.read(); // read a byte, then
|
|
Serial.write(c); // print it out the serial monitor
|
|
if (c == '\n') { // if the byte is a newline character
|
|
|
|
// if the current line is blank, you got two newline characters in a row.
|
|
// that's the end of the client HTTP request, so send a response:
|
|
if (currentLine.length() == 0) {
|
|
// HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
|
|
// and a content-type so the client knows what's coming, then a blank line:
|
|
client.println("HTTP/1.1 200 OK");
|
|
client.println("Content-type:text/html");
|
|
client.println();
|
|
|
|
// the content of the HTTP response follows the header:
|
|
client.print("Click <a href=\"/H\">here</a> turn the LED on pin 9 on<br>");
|
|
client.print("Click <a href=\"/L\">here</a> turn the LED on pin 9 off<br>");
|
|
|
|
// The HTTP response ends with another blank line:
|
|
client.println();
|
|
// break out of the while loop:
|
|
break;
|
|
} else { // if you got a newline, then clear currentLine:
|
|
currentLine = "";
|
|
}
|
|
} else if (c != '\r') { // if you got anything else but a carriage return character,
|
|
currentLine += c; // add it to the end of the currentLine
|
|
}
|
|
|
|
// Check to see if the client request was "GET /H" or "GET /L":
|
|
if (currentLine.endsWith("GET /H")) {
|
|
digitalWrite(9, HIGH); // GET /H turns the LED on
|
|
}
|
|
if (currentLine.endsWith("GET /L")) {
|
|
digitalWrite(9, LOW); // GET /L turns the LED off
|
|
}
|
|
}
|
|
}
|
|
// close the connection:
|
|
client.stop();
|
|
Serial.println("client disonnected");
|
|
}
|
|
}
|
|
|
|
void printWifiStatus() {
|
|
// print the SSID of the network you're attached to:
|
|
Serial.print("SSID: ");
|
|
Serial.println(WiFi.SSID());
|
|
|
|
// print your WiFi shield's IP address:
|
|
IPAddress ip = WiFi.localIP();
|
|
Serial.print("IP Address: ");
|
|
Serial.println(ip);
|
|
|
|
// print the received signal strength:
|
|
long rssi = WiFi.RSSI();
|
|
Serial.print("signal strength (RSSI):");
|
|
Serial.print(rssi);
|
|
Serial.println(" dBm");
|
|
// print where to go in a browser:
|
|
Serial.print("To see this page in action, open a browser to http://");
|
|
Serial.println(ip);
|
|
}
|