131 lines
3.4 KiB
C++
Executable file
131 lines
3.4 KiB
C++
Executable file
/*
|
|
Repeating Wifi Web Client
|
|
|
|
This sketch connects to a a web server and makes a request
|
|
using an Arduino Wifi shield.
|
|
|
|
Circuit:
|
|
* WiFi shield attached to pins SPI pins and pin 7
|
|
|
|
created 23 April 2012
|
|
modified 31 May 2012
|
|
by Tom Igoe
|
|
modified 13 Jan 2014
|
|
by Federico Vanzati
|
|
|
|
http://www.arduino.cc/en/Tutorial/WifiWebClientRepeating
|
|
This code is in the public domain.
|
|
*/
|
|
|
|
#include <SPI.h>
|
|
#include <WiFi.h>
|
|
|
|
char ssid[] = "yourNetwork"; // your network SSID (name)
|
|
char pass[] = "secretPassword"; // your network password
|
|
int keyIndex = 0; // your network key Index number (needed only for WEP)
|
|
|
|
int status = WL_IDLE_STATUS;
|
|
|
|
// Initialize the Wifi client library
|
|
WiFiClient client;
|
|
|
|
// server address:
|
|
char server[] = "www.arduino.cc";
|
|
//IPAddress server(64,131,82,241);
|
|
|
|
unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds
|
|
const unsigned long postingInterval = 10L * 1000L; // delay between updates, in milliseconds
|
|
|
|
void setup() {
|
|
//Initialize serial and wait for port to open:
|
|
Serial.begin(9600);
|
|
while (!Serial) {
|
|
; // wait for serial port to connect. Needed for native USB port only
|
|
}
|
|
|
|
// check for the presence of the shield:
|
|
if (WiFi.status() == WL_NO_SHIELD) {
|
|
Serial.println("WiFi shield not present");
|
|
// don't continue:
|
|
while (true);
|
|
}
|
|
|
|
String fv = WiFi.firmwareVersion();
|
|
if (fv != "1.1.0") {
|
|
Serial.println("Please upgrade the firmware");
|
|
}
|
|
|
|
// attempt to connect to Wifi network:
|
|
while (status != WL_CONNECTED) {
|
|
Serial.print("Attempting to connect to SSID: ");
|
|
Serial.println(ssid);
|
|
// Connect to WPA/WPA2 network. Change this line if using open or WEP network:
|
|
status = WiFi.begin(ssid, pass);
|
|
|
|
// wait 10 seconds for connection:
|
|
delay(10000);
|
|
}
|
|
// you're connected now, so print out the status:
|
|
printWifiStatus();
|
|
}
|
|
|
|
void loop() {
|
|
// if there's incoming data from the net connection.
|
|
// send it out the serial port. This is for debugging
|
|
// purposes only:
|
|
while (client.available()) {
|
|
char c = client.read();
|
|
Serial.write(c);
|
|
}
|
|
|
|
// if ten seconds have passed since your last connection,
|
|
// then connect again and send data:
|
|
if (millis() - lastConnectionTime > postingInterval) {
|
|
httpRequest();
|
|
}
|
|
|
|
}
|
|
|
|
// this method makes a HTTP connection to the server:
|
|
void httpRequest() {
|
|
// close any connection before send a new request.
|
|
// This will free the socket on the WiFi shield
|
|
client.stop();
|
|
|
|
// if there's a successful connection:
|
|
if (client.connect(server, 80)) {
|
|
Serial.println("connecting...");
|
|
// send the HTTP PUT request:
|
|
client.println("GET /latest.txt HTTP/1.1");
|
|
client.println("Host: www.arduino.cc");
|
|
client.println("User-Agent: ArduinoWiFi/1.1");
|
|
client.println("Connection: close");
|
|
client.println();
|
|
|
|
// note the time that the connection was made:
|
|
lastConnectionTime = millis();
|
|
} else {
|
|
// if you couldn't make a connection:
|
|
Serial.println("connection failed");
|
|
}
|
|
}
|
|
|
|
|
|
void printWifiStatus() {
|
|
// print the SSID of the network you're attached to:
|
|
Serial.print("SSID: ");
|
|
Serial.println(WiFi.SSID());
|
|
|
|
// print your WiFi shield's IP address:
|
|
IPAddress ip = WiFi.localIP();
|
|
Serial.print("IP Address: ");
|
|
Serial.println(ip);
|
|
|
|
// print the received signal strength:
|
|
long rssi = WiFi.RSSI();
|
|
Serial.print("signal strength (RSSI):");
|
|
Serial.print(rssi);
|
|
Serial.println(" dBm");
|
|
}
|
|
|
|
|