weatherstation/firmware/libraries/WiFi/extras/wifiHD/src/board_init.h
Kai Lauterbach 0cf171093b Libraries
2022-05-09 09:34:49 +02:00

314 lines
10 KiB
C
Executable file

/*! \page License
* Copyright (C) 2009, H&D Wireless AB All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of H&D Wireless AB may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY H&D WIRELESS AB ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
* SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef STARTUP_H
#define STARTUP_H
#include <board.h>
#include <wl_api.h> /* defines SPB104, SPB105 */
void board_init(void);
/*
*
* EVK1100
* ---------------------------------------------------------------------------
*
*/
#if BOARD == EVK1100
/* USART0 physical assignment */
#define BOARD_RS232_0 AVR32_USART1
#define BOARD_RS232_0_TX \
{ AVR32_USART1_TXD_0_0_PIN, AVR32_USART1_TXD_0_0_FUNCTION }
#define BOARD_RS232_0_RX \
{ AVR32_USART1_RXD_0_0_PIN, AVR32_USART1_RXD_0_0_FUNCTION }
/* USART1 physical assignment */
#define BOARD_RS232_1 AVR32_USART0
#define BOARD_RS232_1_TX \
{ AVR32_USART0_TXD_0_0_PIN, AVR32_USART0_TXD_0_0_FUNCTION }
#define BOARD_RS232_1_RX \
{ AVR32_USART0_RXD_0_0_PIN, AVR32_USART0_RXD_0_0_FUNCTION },
/* Clocks */
#define USE_PLL
#define OSC 0
#define PLL_MUL 10
/* Wifi (SPB104 only) */
#if defined(EXT_BOARD)
#if EXT_BOARD == SPB104
#define WL_SPI AVR32_SPI1 /* Pin 8 NC, so no irq support if using SD-slot */
#define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */
#define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI1_TX
#define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI1_RX
#define WL_SPI_CS 1
#define WL_SPI_NPCS0 { AVR32_SPI1_NPCS_0_0_PIN, AVR32_SPI1_NPCS_0_0_FUNCTION }
#define WL_SPI_NPCS { AVR32_SPI1_NPCS_1_0_PIN, AVR32_SPI1_NPCS_1_0_FUNCTION }
#define WL_SPI_MISO { AVR32_SPI1_MISO_0_0_PIN, AVR32_SPI1_MISO_0_0_FUNCTION }
#define WL_SPI_MOSI { AVR32_SPI1_MOSI_0_0_PIN, AVR32_SPI1_MOSI_0_0_FUNCTION }
#define WL_SPI_SCK { AVR32_SPI1_SCK_0_0_PIN, AVR32_SPI1_SCK_0_0_FUNCTION }
#endif
#endif /* EXT_BOARD */
/*
*
* EVK1101
* ---------------------------------------------------------------------------
*
*/
#elif BOARD == EVK1101
/* USART0 physical assignment */
#define BOARD_RS232_0 AVR32_USART1
#define BOARD_RS232_0_TX \
{ AVR32_USART1_TXD_0_0_PIN, AVR32_USART1_TXD_0_0_FUNCTION }
#define BOARD_RS232_0_RX \
{ AVR32_USART1_RXD_0_0_PIN, AVR32_USART1_RXD_0_0_FUNCTION }
/* Clocks */
#define USE_PLL
#define OSC 0
#define PLL_MUL 9
/* Wifi (SPB104 only) */
#if defined(EXT_BOARD)
#if EXT_BOARD == SPB104 /* Pin 8 NC, so no irq support if using SD-slot */
#define WL_SPI AVR32_SPI
#define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */
#define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI_TX
#define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI_RX
#define WL_SPI_CS 1
#if EXT_BOARD == SPB105
#define WL_SHUTDOWN_PIN AVR32_PIN_PA06
#define WL_POWER_PIN AVR32_PIN_PA30
#endif
#define WL_SPI_NPCS0 { AVR32_SPI_NPCS_0_0_PIN, AVR32_SPI_NPCS_0_0_FUNCTION }
#define WL_SPI_NPCS { AVR32_SPI_NPCS_1_0_PIN, AVR32_SPI_NPCS_1_0_FUNCTION }
#define WL_SPI_MISO { AVR32_SPI_MISO_0_0_PIN, AVR32_SPI_MISO_0_0_FUNCTION }
#define WL_SPI_MOSI { AVR32_SPI_MOSI_0_0_PIN, AVR32_SPI_MOSI_0_0_FUNCTION }
#define WL_SPI_SCK { AVR32_SPI_SCK_0_0_PIN, AVR32_SPI_SCK_0_0_FUNCTION }
#endif
#endif /* EXT_BOARD */
/*
*
* EVK1104
* ---------------------------------------------------------------------------
*
*/
#elif BOARD == EVK1104 /* EVK1104 */
/* USART0 physical assignment */
#define BOARD_RS232_0 AVR32_USART1
#define BOARD_RS232_0_TX \
{ AVR32_USART1_TXD_0_0_PIN, AVR32_USART1_TXD_0_0_FUNCTION }
#define BOARD_RS232_0_RX \
{ AVR32_USART1_RXD_0_0_PIN, AVR32_USART1_RXD_0_0_FUNCTION }
/* Clocks */
#define USE_PLL
#define OSC 0
#define PLL_MUL 9 /* for some reason we cant use 66 MHz */
/* Wifi (SDIO: SPB104 only; SPI: SPB105 only) */
#if defined(EXT_BOARD)
#if EXT_BOARD == SPB105
#define WL_SPI AVR32_SPI0
#define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI0_TX
#define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI0_RX
#define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */
#define WL_SHUTDOWN_PIN AVR32_PIN_PA17 /* Pin 8 on RF-head -> Pin 4 on wifi */
#define WL_IRQ_PIN AVR32_PIN_PA18 /* Pin 6 on RF-head -> Pin 3 on wifi */
#define WL_IRQ AVR32_GPIO_IRQ_2
#define WL_SPI_CS 3
#define WL_SPI_NPCS { AVR32_SPI0_NPCS_3_1_PIN, AVR32_SPI0_NPCS_3_1_FUNCTION }
#define WL_SPI_MISO { AVR32_SPI0_MISO_0_0_PIN, AVR32_SPI0_MISO_0_0_FUNCTION }
#define WL_SPI_MOSI { AVR32_SPI0_MOSI_0_0_PIN, AVR32_SPI0_MOSI_0_0_FUNCTION }
#define WL_SPI_SCK { AVR32_SPI0_SCK_0_0_PIN, AVR32_SPI0_SCK_0_0_FUNCTION }
#elif EXT_BOARD == SPB104
#ifdef SDIO_SLOT_A
#define WL_SDIO_CLK { AVR32_MCI_CLK_0_PIN, AVR32_MCI_CLK_0_FUNCTION }
#define WL_SDIO_CMD { AVR32_MCI_CMD_0_PIN, AVR32_MCI_CMD_0_FUNCTION }
#define WL_SDIO_DAT0 { AVR32_MCI_DATA_0_PIN, AVR32_MCI_DATA_0_FUNCTION }
#define WL_SDIO_DAT1 { AVR32_MCI_DATA_1_PIN, AVR32_MCI_DATA_1_FUNCTION }
#define WL_SDIO_DAT2 { AVR32_MCI_DATA_2_PIN, AVR32_MCI_DATA_2_FUNCTION }
#define WL_SDIO_DAT3 { AVR32_MCI_DATA_3_PIN, AVR32_MCI_DATA_3_FUNCTION }
#else
#define WL_SDIO_CLK { AVR32_MCI_CLK_0_PIN, AVR32_MCI_CLK_0_FUNCTION }
#define WL_SDIO_CMD { AVR32_MCI_CMD_1_0_PIN, AVR32_MCI_CMD_1_0_FUNCTION }
#define WL_SDIO_DAT0 { AVR32_MCI_DATA_8_0_PIN, AVR32_MCI_DATA_8_0_FUNCTION }
#define WL_SDIO_DAT1 { AVR32_MCI_DATA_9_0_PIN, AVR32_MCI_DATA_9_0_FUNCTION }
#define WL_SDIO_DAT2 { AVR32_MCI_DATA_10_0_PIN, AVR32_MCI_DATA_10_0_FUNCTION }
#define WL_SDIO_DAT3 { AVR32_MCI_DATA_11_0_PIN, AVR32_MCI_DATA_11_0_FUNCTION }
#endif
#endif
#endif /* EXT_BOARD */
/*
*
* EVK1105
* ---------------------------------------------------------------------------
*
*/
#elif BOARD == EVK1105 /* EVK1105 */
/* USART0 physical assignment */
#define BOARD_RS232_0 AVR32_USART0
#define BOARD_RS232_0_TX \
{ AVR32_USART0_TXD_0_0_PIN, AVR32_USART0_TXD_0_0_FUNCTION }
#define BOARD_RS232_0_RX \
{ AVR32_USART0_RXD_0_0_PIN, AVR32_USART0_RXD_0_0_FUNCTION }
/* Clocks */
#define USE_PLL
#define OSC 1
#define PLL_MUL 10
/* Wifi SPB104/SPB105 */
#if defined(EXT_BOARD)
#define WL_SPI AVR32_SPI0
#define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI0_TX
#define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI0_RX
#if EXT_BOARD == SPB105
#define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */
#define WL_SHUTDOWN_PIN AVR32_PIN_PB31 /* Pin 8 on RF-head -> Pin 4 on wifi */
#define WL_IRQ_PIN AVR32_PIN_PB30 /* Pin 6 on RF-head -> Pin 3 on wifi */
#define WL_IRQ AVR32_GPIO_IRQ_7
#define WL_SPI_CS 2
#elif EXT_BOARD == SPB104
#define WL_SPI_CLOCK_DIVIDER 3 /* due to adapter */
#define WL_SPI_CS 1
#endif
#define WL_SPI_NPCS0 { AVR32_SPI0_NPCS_0_0_PIN, AVR32_SPI0_NPCS_0_0_FUNCTION }
#if WL_SPI_CS == 1
#define WL_SPI_NPCS { AVR32_SPI0_NPCS_1_0_PIN, AVR32_SPI0_NPCS_1_0_FUNCTION }
#elif WL_SPI_CS == 2
#define WL_SPI_NPCS { AVR32_SPI0_NPCS_2_0_PIN, AVR32_SPI0_NPCS_2_0_FUNCTION }
#endif
#define WL_SPI_MISO { AVR32_SPI0_MISO_0_0_PIN, AVR32_SPI0_MISO_0_0_FUNCTION }
#define WL_SPI_MOSI { AVR32_SPI0_MOSI_0_0_PIN, AVR32_SPI0_MOSI_0_0_FUNCTION }
#define WL_SPI_SCK { AVR32_SPI0_SCK_0_0_PIN, AVR32_SPI0_SCK_0_0_FUNCTION }
#endif /* EXT_BOARD */
/*
*
* ARDUINO
* ---------------------------------------------------------------------------
*
*/
#elif BOARD == ARDUINO /* ARDUINO */
/* USART0 physical assignment */
#define BOARD_RS232_1 AVR32_USART1
#define BOARD_RS232_1_TX \
{ AVR32_USART1_TXD_0_0_PIN, AVR32_USART1_TXD_0_0_FUNCTION }
#define BOARD_RS232_1_RX \
{ AVR32_USART1_RXD_0_0_PIN, AVR32_USART1_RXD_0_0_FUNCTION }
/* Clocks */
#define USE_PLL
#define OSC 0
#define PLL_MUL 8
#define WL_SPI AVR32_SPI1
#define WL_PDCA_PID_TX AVR32_PDCA_PID_SPI1_TX
#define WL_PDCA_PID_RX AVR32_PDCA_PID_SPI1_RX
#define WL_SHUTDOWN_PIN AVR32_PIN_PA09
#define WL_IRQ_PIN AVR32_PIN_PA03
/*
* WL_IRQ_# = (WL_IRQ_PIN / 32) * 4 + (WL_IRQ_PIN / 8) % 4
* 3 => 0 * 4 + 0 = 0
*/
#define WL_IRQ AVR32_GPIO_IRQ_0
#define WL_SPI_CS 0
#define WL_RESET_PIN AVR32_PIN_PA07
#define WL_EXTERNAL_RESET 1
#define WL_SPI_NPCS { AVR32_SPI1_NPCS_0_0_PIN, AVR32_SPI1_NPCS_0_0_FUNCTION }
#define WL_SPI_MISO { AVR32_SPI1_MISO_0_0_PIN, AVR32_SPI1_MISO_0_0_FUNCTION }
#define WL_SPI_MOSI { AVR32_SPI1_MOSI_0_0_PIN, AVR32_SPI1_MOSI_0_0_FUNCTION }
#define WL_SPI_SCK { AVR32_SPI1_SCK_0_0_PIN, AVR32_SPI1_SCK_0_0_FUNCTION }
#endif /* EVKxxxx */
#if OSC == 0
# define FOSC FOSC0 /* 12 MHz */
#else
# define FOSC FOSC1 /* 11.2896 MHz */
#endif
#ifdef USE_PLL
# define FMCK_HZ ((FOSC * (PLL_MUL + 1)) / 2)
#else
# define FMCK_HZ FOSC
#endif
#define FCPU_HZ FMCK_HZ
#define FHSB_HZ FCPU_HZ
#define FPBB_HZ FMCK_HZ
#define FPBA_HZ FMCK_HZ
#ifndef CONFIG_CONSOLE_PORT
#define CONFIG_CONSOLE_PORT BOARD_RS232_1
#endif
#endif