weatherstation/firmware/libraries/Adafruit_BMP280_Library/Adafruit_BMP280.cpp

/*!
 *  @file Adafruit_BMP280.cpp
 *
 *  This is a library for the BMP280 orientation sensor
 *
 *  Designed specifically to work with the Adafruit BMP280 Sensor.
 *
 *  Pick one up today in the adafruit shop!
 *  ------> https://www.adafruit.com/product/2651
 *
 *  These sensors use I2C to communicate, 2 pins are required to interface.
 *
 *  Adafruit invests time and resources providing this open source code,
 *  please support Adafruit andopen-source hardware by purchasing products
 *  from Adafruit!
 *
 *  K.Townsend (Adafruit Industries)
 *
 *  BSD license, all text above must be included in any redistribution
 */

#include <Adafruit_BMP280.h>

/*!
 * @brief  BMP280 constructor using i2c
 * @param  *theWire
 *         optional wire
 */
Adafruit_BMP280::Adafruit_BMP280(TwoWire *theWire) {
  _wire = theWire;
  temp_sensor = new Adafruit_BMP280_Temp(this);
  pressure_sensor = new Adafruit_BMP280_Pressure(this);
}

/*!
 * @brief  BMP280 constructor using hardware SPI
 * @param  cspin
 *         cs pin number
 * @param  theSPI
 *         optional SPI object
 */
Adafruit_BMP280::Adafruit_BMP280(int8_t cspin, SPIClass *theSPI) {
  spi_dev = new Adafruit_SPIDevice(cspin, 1000000, SPI_BITORDER_MSBFIRST,
                                   SPI_MODE0, theSPI);
  temp_sensor = new Adafruit_BMP280_Temp(this);
  pressure_sensor = new Adafruit_BMP280_Pressure(this);
}

/*!
 * @brief  BMP280 constructor using bitbang SPI
 * @param  cspin
 *         The pin to use for CS/SSEL.
 * @param  mosipin
 *         The pin to use for MOSI.
 * @param  misopin
 *         The pin to use for MISO.
 * @param  sckpin
 *         The pin to use for SCK.
 */
Adafruit_BMP280::Adafruit_BMP280(int8_t cspin, int8_t mosipin, int8_t misopin,
                                 int8_t sckpin) {
  spi_dev = new Adafruit_SPIDevice(cspin, sckpin, misopin, mosipin);
  temp_sensor = new Adafruit_BMP280_Temp(this);
  pressure_sensor = new Adafruit_BMP280_Pressure(this);
}

Adafruit_BMP280::~Adafruit_BMP280(void) {
  if (spi_dev)
    delete spi_dev;
  if (i2c_dev)
    delete i2c_dev;
  if (temp_sensor)
    delete temp_sensor;
  if (pressure_sensor)
    delete pressure_sensor;
}

/*!
 *  Initialises the sensor.
 *  @param addr
 *         The I2C address to use (default = 0x77)
 *  @param chipid
 *         The expected chip ID (used to validate connection).
 *  @return True if the init was successful, otherwise false.
 */
bool Adafruit_BMP280::begin(uint8_t addr, uint8_t chipid) {
  if (spi_dev == NULL) {
    // I2C mode
    if (i2c_dev)
      delete i2c_dev;
    i2c_dev = new Adafruit_I2CDevice(addr, _wire);
    if (!i2c_dev->begin())
      return false;
  } else {
    // SPI mode
    if (!spi_dev->begin())
      return false;
  }

  // check if sensor, i.e. the chip ID is correct
  _sensorID = read8(BMP280_REGISTER_CHIPID);
  if (_sensorID != chipid)
    return false;

  readCoefficients();
  // write8(BMP280_REGISTER_CONTROL, 0x3F); /* needed? */
  setSampling();
  delay(100);
  return true;
}

/*!
 * Sets the sampling config for the device.
 * @param mode
 *        The operating mode of the sensor.
 * @param tempSampling
 *        The sampling scheme for temp readings.
 * @param pressSampling
 *        The sampling scheme for pressure readings.
 * @param filter
 *        The filtering mode to apply (if any).
 * @param duration
 *        The sampling duration.
 */
void Adafruit_BMP280::setSampling(sensor_mode mode,
                                  sensor_sampling tempSampling,
                                  sensor_sampling pressSampling,
                                  sensor_filter filter,
                                  standby_duration duration) {
  if (!_sensorID)
    return; // begin() not called yet
  _measReg.mode = mode;
  _measReg.osrs_t = tempSampling;
  _measReg.osrs_p = pressSampling;

  _configReg.filter = filter;
  _configReg.t_sb = duration;

  write8(BMP280_REGISTER_CONFIG, _configReg.get());
  write8(BMP280_REGISTER_CONTROL, _measReg.get());
}

/**************************************************************************/
/*!
    @brief  Writes an 8 bit value over I2C/SPI
*/
/**************************************************************************/
void Adafruit_BMP280::write8(byte reg, byte value) {
  byte buffer[2];
  buffer[1] = value;
  if (i2c_dev) {
    buffer[0] = reg;
    i2c_dev->write(buffer, 2);
  } else {
    buffer[0] = reg & ~0x80;
    spi_dev->write(buffer, 2);
  }
}

/*!
 *  @brief  Reads an 8 bit value over I2C/SPI
 *  @param  reg
 *          selected register
 *  @return value from selected register
 */
uint8_t Adafruit_BMP280::read8(byte reg) {
  uint8_t buffer[1];
  if (i2c_dev) {
    buffer[0] = uint8_t(reg);
    i2c_dev->write_then_read(buffer, 1, buffer, 1);
  } else {
    buffer[0] = uint8_t(reg | 0x80);
    spi_dev->write_then_read(buffer, 1, buffer, 1);
  }
  return buffer[0];
}

/*!
 *  @brief  Reads a 16 bit value over I2C/SPI
 */
uint16_t Adafruit_BMP280::read16(byte reg) {
  uint8_t buffer[2];

  if (i2c_dev) {
    buffer[0] = uint8_t(reg);
    i2c_dev->write_then_read(buffer, 1, buffer, 2);
  } else {
    buffer[0] = uint8_t(reg | 0x80);
    spi_dev->write_then_read(buffer, 1, buffer, 2);
  }
  return uint16_t(buffer[0]) << 8 | uint16_t(buffer[1]);
}

uint16_t Adafruit_BMP280::read16_LE(byte reg) {
  uint16_t temp = read16(reg);
  return (temp >> 8) | (temp << 8);
}

/*!
 *   @brief  Reads a signed 16 bit value over I2C/SPI
 */
int16_t Adafruit_BMP280::readS16(byte reg) { return (int16_t)read16(reg); }

int16_t Adafruit_BMP280::readS16_LE(byte reg) {
  return (int16_t)read16_LE(reg);
}

/*!
 *  @brief  Reads a 24 bit value over I2C/SPI
 */
uint32_t Adafruit_BMP280::read24(byte reg) {
  uint8_t buffer[3];

  if (i2c_dev) {
    buffer[0] = uint8_t(reg);
    i2c_dev->write_then_read(buffer, 1, buffer, 3);
  } else {
    buffer[0] = uint8_t(reg | 0x80);
    spi_dev->write_then_read(buffer, 1, buffer, 3);
  }
  return uint32_t(buffer[0]) << 16 | uint32_t(buffer[1]) << 8 |
         uint32_t(buffer[2]);
}

/*!
 *  @brief  Reads the factory-set coefficients
 */
void Adafruit_BMP280::readCoefficients() {
  _bmp280_calib.dig_T1 = read16_LE(BMP280_REGISTER_DIG_T1);
  _bmp280_calib.dig_T2 = readS16_LE(BMP280_REGISTER_DIG_T2);
  _bmp280_calib.dig_T3 = readS16_LE(BMP280_REGISTER_DIG_T3);

  _bmp280_calib.dig_P1 = read16_LE(BMP280_REGISTER_DIG_P1);
  _bmp280_calib.dig_P2 = readS16_LE(BMP280_REGISTER_DIG_P2);
  _bmp280_calib.dig_P3 = readS16_LE(BMP280_REGISTER_DIG_P3);
  _bmp280_calib.dig_P4 = readS16_LE(BMP280_REGISTER_DIG_P4);
  _bmp280_calib.dig_P5 = readS16_LE(BMP280_REGISTER_DIG_P5);
  _bmp280_calib.dig_P6 = readS16_LE(BMP280_REGISTER_DIG_P6);
  _bmp280_calib.dig_P7 = readS16_LE(BMP280_REGISTER_DIG_P7);
  _bmp280_calib.dig_P8 = readS16_LE(BMP280_REGISTER_DIG_P8);
  _bmp280_calib.dig_P9 = readS16_LE(BMP280_REGISTER_DIG_P9);
}

/*!
 * Reads the temperature from the device.
 * @return The temperature in degrees celsius.
 */
float Adafruit_BMP280::readTemperature() {
  int32_t var1, var2;
  if (!_sensorID)
    return NAN; // begin() not called yet

  int32_t adc_T = read24(BMP280_REGISTER_TEMPDATA);
  adc_T >>= 4;

  var1 = ((((adc_T >> 3) - ((int32_t)_bmp280_calib.dig_T1 << 1))) *
          ((int32_t)_bmp280_calib.dig_T2)) >>
         11;

  var2 = (((((adc_T >> 4) - ((int32_t)_bmp280_calib.dig_T1)) *
            ((adc_T >> 4) - ((int32_t)_bmp280_calib.dig_T1))) >>
           12) *
          ((int32_t)_bmp280_calib.dig_T3)) >>
         14;

  t_fine = var1 + var2;

  float T = (t_fine * 5 + 128) >> 8;
  return T / 100;
}

/*!
 * Reads the barometric pressure from the device.
 * @return Barometric pressure in Pa.
 */
float Adafruit_BMP280::readPressure() {
  int64_t var1, var2, p;
  if (!_sensorID)
    return NAN; // begin() not called yet

  // Must be done first to get the t_fine variable set up
  readTemperature();

  int32_t adc_P = read24(BMP280_REGISTER_PRESSUREDATA);
  adc_P >>= 4;

  var1 = ((int64_t)t_fine) - 128000;
  var2 = var1 * var1 * (int64_t)_bmp280_calib.dig_P6;
  var2 = var2 + ((var1 * (int64_t)_bmp280_calib.dig_P5) << 17);
  var2 = var2 + (((int64_t)_bmp280_calib.dig_P4) << 35);
  var1 = ((var1 * var1 * (int64_t)_bmp280_calib.dig_P3) >> 8) +
         ((var1 * (int64_t)_bmp280_calib.dig_P2) << 12);
  var1 =
      (((((int64_t)1) << 47) + var1)) * ((int64_t)_bmp280_calib.dig_P1) >> 33;

  if (var1 == 0) {
    return 0; // avoid exception caused by division by zero
  }
  p = 1048576 - adc_P;
  p = (((p << 31) - var2) * 3125) / var1;
  var1 = (((int64_t)_bmp280_calib.dig_P9) * (p >> 13) * (p >> 13)) >> 25;
  var2 = (((int64_t)_bmp280_calib.dig_P8) * p) >> 19;

  p = ((p + var1 + var2) >> 8) + (((int64_t)_bmp280_calib.dig_P7) << 4);
  return (float)p / 256;
}

/*!
 * @brief Calculates the approximate altitude using barometric pressure and the
 * supplied sea level hPa as a reference.
 * @param seaLevelhPa
 *        The current hPa at sea level.
 * @return The approximate altitude above sea level in meters.
 */
float Adafruit_BMP280::readAltitude(float seaLevelhPa) {
  float altitude;

  float pressure = readPressure(); // in Si units for Pascal
  pressure /= 100;

  altitude = 44330 * (1.0 - pow(pressure / seaLevelhPa, 0.1903));

  return altitude;
}

/*!
 * Calculates the pressure at sea level (QNH) from the specified altitude,
 * and atmospheric pressure (QFE).
 * @param  altitude      Altitude in m
 * @param  atmospheric   Atmospheric pressure in hPa
 * @return The approximate pressure in hPa
 */
float Adafruit_BMP280::seaLevelForAltitude(float altitude, float atmospheric) {
  // Equation taken from BMP180 datasheet (page 17):
  // http://www.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf

  // Note that using the equation from wikipedia can give bad results
  // at high altitude.  See this thread for more information:
  // http://forums.adafruit.com/viewtopic.php?f=22&t=58064
  return atmospheric / pow(1.0 - (altitude / 44330.0), 5.255);
}

/*!
    @brief  calculates the boiling point  of water by a given pressure
    @param pressure pressure in hPa
    @return temperature in °C
*/

float Adafruit_BMP280::waterBoilingPoint(float pressure) {
  // Magnusformular for calculation of the boiling point of water at a given
  // pressure
  return (234.175 * log(pressure / 6.1078)) /
         (17.08085 - log(pressure / 6.1078));
}

/*!
    @brief  Take a new measurement (only possible in forced mode)
    @return true if successful, otherwise false
 */
bool Adafruit_BMP280::takeForcedMeasurement() {
  // If we are in forced mode, the BME sensor goes back to sleep after each
  // measurement and we need to set it to forced mode once at this point, so
  // it will take the next measurement and then return to sleep again.
  // In normal mode simply does new measurements periodically.
  if (_measReg.mode == MODE_FORCED) {
    // set to forced mode, i.e. "take next measurement"
    write8(BMP280_REGISTER_CONTROL, _measReg.get());
    // wait until measurement has been completed, otherwise we would read
    // the values from the last measurement
    while (read8(BMP280_REGISTER_STATUS) & 0x08)
      delay(1);
    return true;
  }
  return false;
}

/*!
 *  @brief  Resets the chip via soft reset
 */
void Adafruit_BMP280::reset(void) {
  write8(BMP280_REGISTER_SOFTRESET, MODE_SOFT_RESET_CODE);
}

/*!
 *   Returns Sensor ID for diagnostics
 *   @returns 0x61 for BME680, 0x60 for BME280, 0x56, 0x57, 0x58 for BMP280
 */
uint8_t Adafruit_BMP280::sensorID(void) { return _sensorID; };

/*!
    @brief  Gets the most recent sensor event from the hardware status register.
    @return Sensor status as a byte.
 */
uint8_t Adafruit_BMP280::getStatus(void) {
  return read8(BMP280_REGISTER_STATUS);
}

/*!
    @brief  Gets an Adafruit Unified Sensor object for the temp sensor component
    @return Adafruit_Sensor pointer to temperature sensor
 */
Adafruit_Sensor *Adafruit_BMP280::getTemperatureSensor(void) {
  return temp_sensor;
}

/*!
    @brief  Gets an Adafruit Unified Sensor object for the pressure sensor
   component
    @return Adafruit_Sensor pointer to pressure sensor
 */
Adafruit_Sensor *Adafruit_BMP280::getPressureSensor(void) {
  return pressure_sensor;
}

/**************************************************************************/
/*!
    @brief  Gets the sensor_t data for the BMP280's temperature sensor
*/
/**************************************************************************/
void Adafruit_BMP280_Temp::getSensor(sensor_t *sensor) {
  /* Clear the sensor_t object */
  memset(sensor, 0, sizeof(sensor_t));

  /* Insert the sensor name in the fixed length char array */
  strncpy(sensor->name, "BMP280", sizeof(sensor->name) - 1);
  sensor->name[sizeof(sensor->name) - 1] = 0;
  sensor->version = 1;
  sensor->sensor_id = _sensorID;
  sensor->type = SENSOR_TYPE_AMBIENT_TEMPERATURE;
  sensor->min_delay = 0;
  sensor->min_value = -40.0; /* Temperature range -40 ~ +85 C  */
  sensor->max_value = +85.0;
  sensor->resolution = 0.01; /*  0.01 C */
}

/**************************************************************************/
/*!
    @brief  Gets the temperature as a standard sensor event
    @param  event Sensor event object that will be populated
    @returns True
*/
/**************************************************************************/
bool Adafruit_BMP280_Temp::getEvent(sensors_event_t *event) {
  /* Clear the event */
  memset(event, 0, sizeof(sensors_event_t));

  event->version = sizeof(sensors_event_t);
  event->sensor_id = _sensorID;
  event->type = SENSOR_TYPE_AMBIENT_TEMPERATURE;
  event->timestamp = millis();
  event->temperature = _theBMP280->readTemperature();
  return true;
}

/**************************************************************************/
/*!
    @brief  Gets the sensor_t data for the BMP280's pressure sensor
*/
/**************************************************************************/
void Adafruit_BMP280_Pressure::getSensor(sensor_t *sensor) {
  /* Clear the sensor_t object */
  memset(sensor, 0, sizeof(sensor_t));

  /* Insert the sensor name in the fixed length char array */
  strncpy(sensor->name, "BMP280", sizeof(sensor->name) - 1);
  sensor->name[sizeof(sensor->name) - 1] = 0;
  sensor->version = 1;
  sensor->sensor_id = _sensorID;
  sensor->type = SENSOR_TYPE_PRESSURE;
  sensor->min_delay = 0;
  sensor->min_value = 300.0; /* 300 ~ 1100 hPa  */
  sensor->max_value = 1100.0;
  sensor->resolution = 0.012; /* 0.12 hPa relative */
}

/**************************************************************************/
/*!
    @brief  Gets the pressure as a standard sensor event
    @param  event Sensor event object that will be populated
    @returns True
*/
/**************************************************************************/
bool Adafruit_BMP280_Pressure::getEvent(sensors_event_t *event) {
  /* Clear the event */
  memset(event, 0, sizeof(sensors_event_t));

  event->version = sizeof(sensors_event_t);
  event->sensor_id = _sensorID;
  event->type = SENSOR_TYPE_PRESSURE;
  event->timestamp = millis();
  event->pressure = _theBMP280->readPressure() / 100; // convert Pa to hPa
  return true;
}