118 lines
3 KiB
C++
Executable file
118 lines
3 KiB
C++
Executable file
|
|
/*
|
|
WiFi UDP Send and Receive String
|
|
|
|
This sketch wait an UDP packet on localPort using a WiFi shield.
|
|
When a packet is received an Acknowledge packet is sent to the client on port remotePort
|
|
|
|
Circuit:
|
|
* WiFi shield attached
|
|
|
|
created 30 December 2012
|
|
by dlf (Metodo2 srl)
|
|
|
|
*/
|
|
|
|
|
|
#include <SPI.h>
|
|
#include <WiFi.h>
|
|
#include <WiFiUdp.h>
|
|
|
|
int status = WL_IDLE_STATUS;
|
|
char ssid[] = "yourNetwork"; // your network SSID (name)
|
|
char pass[] = "secretPassword"; // your network password (use for WPA, or use as key for WEP)
|
|
int keyIndex = 0; // your network key Index number (needed only for WEP)
|
|
|
|
unsigned int localPort = 2390; // local port to listen on
|
|
|
|
char packetBuffer[255]; //buffer to hold incoming packet
|
|
char ReplyBuffer[] = "acknowledged"; // a string to send back
|
|
|
|
WiFiUDP Udp;
|
|
|
|
void setup() {
|
|
//Initialize serial and wait for port to open:
|
|
Serial.begin(9600);
|
|
while (!Serial) {
|
|
; // wait for serial port to connect. Needed for native USB port only
|
|
}
|
|
|
|
// check for the presence of the shield:
|
|
if (WiFi.status() == WL_NO_SHIELD) {
|
|
Serial.println("WiFi shield not present");
|
|
// don't continue:
|
|
while (true);
|
|
}
|
|
|
|
String fv = WiFi.firmwareVersion();
|
|
if (fv != "1.1.0") {
|
|
Serial.println("Please upgrade the firmware");
|
|
}
|
|
|
|
// attempt to connect to Wifi network:
|
|
while (status != WL_CONNECTED) {
|
|
Serial.print("Attempting to connect to SSID: ");
|
|
Serial.println(ssid);
|
|
// Connect to WPA/WPA2 network. Change this line if using open or WEP network:
|
|
status = WiFi.begin(ssid);
|
|
|
|
// wait 10 seconds for connection:
|
|
delay(10000);
|
|
}
|
|
Serial.println("Connected to wifi");
|
|
printWifiStatus();
|
|
|
|
Serial.println("\nStarting connection to server...");
|
|
// if you get a connection, report back via serial:
|
|
Udp.begin(localPort);
|
|
}
|
|
|
|
void loop() {
|
|
|
|
// if there's data available, read a packet
|
|
int packetSize = Udp.parsePacket();
|
|
if (packetSize) {
|
|
Serial.print("Received packet of size ");
|
|
Serial.println(packetSize);
|
|
Serial.print("From ");
|
|
IPAddress remoteIp = Udp.remoteIP();
|
|
Serial.print(remoteIp);
|
|
Serial.print(", port ");
|
|
Serial.println(Udp.remotePort());
|
|
|
|
// read the packet into packetBufffer
|
|
int len = Udp.read(packetBuffer, 255);
|
|
if (len > 0) {
|
|
packetBuffer[len] = 0;
|
|
}
|
|
Serial.println("Contents:");
|
|
Serial.println(packetBuffer);
|
|
|
|
// send a reply, to the IP address and port that sent us the packet we received
|
|
Udp.beginPacket(Udp.remoteIP(), Udp.remotePort());
|
|
Udp.write(ReplyBuffer);
|
|
Udp.endPacket();
|
|
}
|
|
}
|
|
|
|
|
|
void printWifiStatus() {
|
|
// print the SSID of the network you're attached to:
|
|
Serial.print("SSID: ");
|
|
Serial.println(WiFi.SSID());
|
|
|
|
// print your WiFi shield's IP address:
|
|
IPAddress ip = WiFi.localIP();
|
|
Serial.print("IP Address: ");
|
|
Serial.println(ip);
|
|
|
|
// print the received signal strength:
|
|
long rssi = WiFi.RSSI();
|
|
Serial.print("signal strength (RSSI):");
|
|
Serial.print(rssi);
|
|
Serial.println(" dBm");
|
|
}
|
|
|
|
|
|
|
|
|