weatherstation/firmware/libraries/APDS9930-master/examples/ProximitySensor/ProximitySensor.ino
Kai Lauterbach 0cf171093b Libraries
2022-05-09 09:34:49 +02:00

113 lines
No EOL
2.9 KiB
C++
Executable file

/****************************************************************
ProximitySensor.ino
APDS-9930 ambient light and proximity sensor
Davide Depau
December 11, 2015
https://github.com/Davideddu/APDS9930
Shawn Hymel @ SparkFun Electronics
October 28, 2014
https://github.com/sparkfun/APDS-9960_RGB_and_Gesture_Sensor
Tests the proximity sensing abilities of the APDS-9930.
Configures the APDS-9930 over I2C and polls for the distance to
the object nearest the sensor.
Hardware Connections:
IMPORTANT: The APDS-9930 can only accept 3.3V!
Arduino Pin APDS-9930 Board Function
3.3V VCC Power
GND GND Ground
A4 SDA I2C Data
A5 SCL I2C Clock
Resources:
Include Wire.h and SparkFun_APDS-9930.h
Development environment specifics:
Written in Arduino 1.0.5
Tested with SparkFun Arduino Pro Mini 3.3V
This code is beerware; if you see me (or any other SparkFun
employee) at the local, and you've found our code helpful, please
buy us a round!
Distributed as-is; no warranty is given.
****************************************************************/
#define DUMP_REGS
#include <Wire.h>
#include <APDS9930.h>
// Global Variables
APDS9930 apds = APDS9930();
uint16_t proximity_data = 0;
void setup() {
//analogReference(EXTERNAL);
// Initialize Serial port
Serial.begin(9600);
Serial.println();
Serial.println(F("---------------------------"));
Serial.println(F("APDS-9930 - ProximitySensor"));
Serial.println(F("---------------------------"));
// Initialize APDS-9930 (configure I2C and initial values)
if ( apds.init() ) {
Serial.println(F("APDS-9930 initialization complete"));
} else {
Serial.println(F("Something went wrong during APDS-9930 init!"));
}
// // Adjust the Proximity sensor gain
// if ( !apds.setProximityGain(PGAIN_2X) ) {
// Serial.println(F("Something went wrong trying to set PGAIN"));
// }
// Start running the APDS-9930 proximity sensor (no interrupts)
if ( apds.enableProximitySensor(false) ) {
Serial.println(F("Proximity sensor is now running"));
} else {
Serial.println(F("Something went wrong during sensor init!"));
}
#ifdef DUMP_REGS
/* Register dump */
uint8_t reg;
uint8_t val;
for(reg = 0x00; reg <= 0x19; reg++) {
if( (reg != 0x10) && \
(reg != 0x11) )
{
apds.wireReadDataByte(reg, val);
Serial.print(reg, HEX);
Serial.print(": 0x");
Serial.println(val, HEX);
}
}
apds.wireReadDataByte(0x1E, val);
Serial.print(0x1E, HEX);
Serial.print(": 0x");
Serial.println(val, HEX);
#endif
}
void loop() {
// Read the proximity value
if ( !apds.readProximity(proximity_data) ) {
Serial.println("Error reading proximity value");
} else {
Serial.print("Proximity: ");
Serial.println(proximity_data);
}
// Wait 250 ms before next reading
delay(250);
}