weatherstation/firmware/libraries/Adafruit_BusIO/Adafruit_BusIO_Register.h
2022-11-11 11:11:25 +01:00

105 lines
3.3 KiB
C++

#ifndef Adafruit_BusIO_Register_h
#define Adafruit_BusIO_Register_h
#include <Arduino.h>
#if !defined(SPI_INTERFACES_COUNT) || \
(defined(SPI_INTERFACES_COUNT) && (SPI_INTERFACES_COUNT > 0))
#include <Adafruit_I2CDevice.h>
#include <Adafruit_SPIDevice.h>
typedef enum _Adafruit_BusIO_SPIRegType {
ADDRBIT8_HIGH_TOREAD = 0,
/*!<
* ADDRBIT8_HIGH_TOREAD
* When reading a register you must actually send the value 0x80 + register
* address to the device. e.g. To read the register 0x0B the register value
* 0x8B is sent and to write 0x0B is sent.
*/
AD8_HIGH_TOREAD_AD7_HIGH_TOINC = 1,
/*!<
* ADDRBIT8_HIGH_TOWRITE
* When writing to a register you must actually send the value 0x80 +
* the register address to the device. e.g. To write to the register 0x19 the
* register value 0x99 is sent and to read 0x19 is sent.
*/
ADDRBIT8_HIGH_TOWRITE = 2,
/*!<
* ADDRESSED_OPCODE_LOWBIT_TO_WRITE
* Used by the MCP23S series, we send 0x40 |'rd with the opcode
* Then set the lowest bit to write
*/
ADDRESSED_OPCODE_BIT0_LOW_TO_WRITE = 3,
} Adafruit_BusIO_SPIRegType;
/*!
* @brief The class which defines a device register (a location to read/write
* data from)
*/
class Adafruit_BusIO_Register {
public:
Adafruit_BusIO_Register(Adafruit_I2CDevice *i2cdevice, uint16_t reg_addr,
uint8_t width = 1, uint8_t byteorder = LSBFIRST,
uint8_t address_width = 1);
Adafruit_BusIO_Register(Adafruit_SPIDevice *spidevice, uint16_t reg_addr,
Adafruit_BusIO_SPIRegType type, uint8_t width = 1,
uint8_t byteorder = LSBFIRST,
uint8_t address_width = 1);
Adafruit_BusIO_Register(Adafruit_I2CDevice *i2cdevice,
Adafruit_SPIDevice *spidevice,
Adafruit_BusIO_SPIRegType type, uint16_t reg_addr,
uint8_t width = 1, uint8_t byteorder = LSBFIRST,
uint8_t address_width = 1);
bool read(uint8_t *buffer, uint8_t len);
bool read(uint8_t *value);
bool read(uint16_t *value);
uint32_t read(void);
uint32_t readCached(void);
bool write(uint8_t *buffer, uint8_t len);
bool write(uint32_t value, uint8_t numbytes = 0);
uint8_t width(void);
void setWidth(uint8_t width);
void setAddress(uint16_t address);
void setAddressWidth(uint16_t address_width);
void print(Stream *s = &Serial);
void println(Stream *s = &Serial);
private:
Adafruit_I2CDevice *_i2cdevice;
Adafruit_SPIDevice *_spidevice;
Adafruit_BusIO_SPIRegType _spiregtype;
uint16_t _address;
uint8_t _width, _addrwidth, _byteorder;
uint8_t _buffer[4]; // we won't support anything larger than uint32 for
// non-buffered read
uint32_t _cached = 0;
};
/*!
* @brief The class which defines a slice of bits from within a device register
* (a location to read/write data from)
*/
class Adafruit_BusIO_RegisterBits {
public:
Adafruit_BusIO_RegisterBits(Adafruit_BusIO_Register *reg, uint8_t bits,
uint8_t shift);
bool write(uint32_t value);
uint32_t read(void);
private:
Adafruit_BusIO_Register *_register;
uint8_t _bits, _shift;
};
#endif // SPI exists
#endif // BusIO_Register_h