weatherstation/firmware/libraries/WiFi/extras/scripts/ArduinoWifiShield_upgrade.sh
Aaron Fischer f24858d162 Move all dependencies to the repository
This step seems bold, but is saves us so much hassle. Even better, we have a
reliable codebase, with all the dependencies (and their versions) we
need in order to build the project. If a library got an update, we can
replace it inplace if the code is still compatible.
2019-02-03 16:15:00 +01:00

121 lines
3.2 KiB
Bash

#!/bin/sh
#WIFI_FW_PATH="/hardware/arduino/firmwares/wifishield/binary"
WIFI_FW_PATH="/libraries/WiFi/extras/binary"
AVR_TOOLS_PATH="/hardware/tools/avr/bin"
TARGET_MICRO="at32uc3a1256"
progname=$0
usage () {
cat <<EOF
Usage: $progname [-a Arduino_path] [-f which_firmware] [-h]
-a set the path where the Arduino IDE is installed
-f the firmware you want to upload, valid parameters are:
shield - to upgrade the WiFi shield firmware
all - to upgrade both firmwares
-h help
EOF
exit 0
}
upgradeHDmodule () {
sleep 1 # Give time to the shield to end the boot
echo "****Upgrade HD WiFi module firmware****\n"
dfu-programmer $TARGET_MICRO erase
dfu-programmer $TARGET_MICRO flash --suppress-bootloader-mem $WIFI_FW_PATH/wifi_dnld.hex
dfu-programmer $TARGET_MICRO start
if [ $? != 0 ] ; then
echo "\nError during device initialization, please close the J3 jumper and press the reset button.\nTry -h for help\n"
exit 1 # if the device is not recognized exit
fi
echo -n "\nPress the RESET button on the shield then type [ENTER] to upgrade the firmware of the shield..\n"
read readEnter
}
upgradeShield () {
sleep 1 # Give time to the shield to end the boot
echo "****Upgrade WiFi Shield firmware****\n"
dfu-programmer $TARGET_MICRO erase
dfu-programmer $TARGET_MICRO flash --suppress-bootloader-mem $WIFI_FW_PATH/wifiHD.hex
dfu-programmer $TARGET_MICRO start
if [ $? != 0 ] ; then
echo "\nError during device initialization, please close the J3 jumper and press the reset button.\nTry -h for help\n"
exit 1 # if the device is not recognized exit
fi
echo "\nDone. Remove the J3 jumper and press the RESET button on the shield."
echo "Thank you!\n"
}
cat <<EOF
Arduino WiFi Shield upgrade
=========================================
Instructions:
To access to the USB devices correctly, the dfu-programmer needs to have the root permissions.
You can upgrade the firmware of the antenna togheter with the shield firmware or only the shield firmware
if there aren't changes on the antenna firmware.
Use the '-h' parameter for help
=========================================
EOF
if [ $USER = 'root' ] ; then #check if the current user is root
while getopts ":a:f:h" opt; do
case $opt in
a)
ARDUINO_PATH=$OPTARG
WIFI_FW_PATH=$ARDUINO_PATH$WIFI_FW_PATH
AVR_TOOLS_PATH=$ARDUINO_PATH$AVR_TOOLS_PATH
cd $AVR_TOOLS_PATH
./avr-objcopy --output-target=ihex $WIFI_FW_PATH/wifi_dnld.elf $WIFI_FW_PATH/wifi_dnld.hex
./avr-objcopy --output-target=ihex $WIFI_FW_PATH/wifiHD.elf $WIFI_FW_PATH/wifiHD.hex
;;
f)
if [ "$ARDUINO_PATH" != "" ] ; then
if [ "$OPTARG" = "all" ] ; then
upgradeHDmodule
upgradeShield
exit 0
else
if [ "$OPTARG" = "shield" ] ; then
upgradeShield
exit 0
else
echo "invalid parameter for the -f [firmware] option, please retry."
echo "Type -h for help\n"
exit 1
fi
fi
else
echo "Arduino Path not setted. Retry...\n"
fi
;;
h)
usage ;;
\?)
echo "Invalid option: $OPTARG" >&2
usage
exit 1
;;
:)
echo "Option -$OPTARG requires an argument." >&2
exit 1
;;
esac
done
else
echo "Please retry running the script as root.\n"
fi
shift $(($OPTIND - 1))