weatherstation/firmware/libraries/WiFiManager/examples/AutoConnectWithStaticIP/AutoConnectWithStaticIP.ino
Aaron Fischer f24858d162 Move all dependencies to the repository
This step seems bold, but is saves us so much hassle. Even better, we have a
reliable codebase, with all the dependencies (and their versions) we
need in order to build the project. If a library got an update, we can
replace it inplace if the code is still compatible.
2019-02-03 16:15:00 +01:00

80 lines
2.3 KiB
C++

#include <FS.h> //this needs to be first, or it all crashes and burns...
#include <ESP8266WiFi.h> //https://github.com/esp8266/Arduino
//needed for library
#include <DNSServer.h>
#include <ESP8266WebServer.h>
#include <WiFiManager.h> //https://github.com/tzapu/WiFiManager
/**************************************************************************************
* this example shows how to set a static IP configuration for the ESP
* although the IP shows in the config portal, the changes will revert
* to the IP set in the source file.
* if you want the ability to configure and persist the new IP configuration
* look at the FS examples, which save the config to file
*************************************************************************************/
//default custom static IP
//char static_ip[16] = "10.0.1.59";
//char static_gw[16] = "10.0.1.1";
//char static_sn[16] = "255.255.255.0";
void setup() {
// put your setup code here, to run once:
Serial.begin(115200);
Serial.println();
//WiFiManager
//Local intialization. Once its business is done, there is no need to keep it around
WiFiManager wifiManager;
//reset settings - for testing
//wifiManager.resetSettings();
//set static ip
//block1 should be used for ESP8266 core 2.1.0 or newer, otherwise use block2
//start-block1
//IPAddress _ip,_gw,_sn;
//_ip.fromString(static_ip);
//_gw.fromString(static_gw);
//_sn.fromString(static_sn);
//end-block1
//start-block2
IPAddress _ip = IPAddress(10, 0, 1, 78);
IPAddress _gw = IPAddress(10, 0, 1, 1);
IPAddress _sn = IPAddress(255, 255, 255, 0);
//end-block2
wifiManager.setSTAStaticIPConfig(_ip, _gw, _sn);
//tries to connect to last known settings
//if it does not connect it starts an access point with the specified name
//here "AutoConnectAP" with password "password"
//and goes into a blocking loop awaiting configuration
if (!wifiManager.autoConnect("AutoConnectAP", "password")) {
Serial.println("failed to connect, we should reset as see if it connects");
delay(3000);
ESP.reset();
delay(5000);
}
//if you get here you have connected to the WiFi
Serial.println("connected...yeey :)");
Serial.println("local ip");
Serial.println(WiFi.localIP());
}
void loop() {
// put your main code here, to run repeatedly:
}