Added version info to the web interface, and the DEV string will only appear on development versions now.

This reverts commit dbaa21bd30.

.vscode/arduino.json

@@ -0,0 +1,15 @@
+{
+    "configuration": "xtal=80,vt=flash,exception=disabled,stacksmash=disabled,ssl=all,mmu=3232,non32xfer=fast,eesz=4M2M,led=2,ip=lm2f,dbg=Disabled,lvl=None____,wipe=none,baud=460800",
+    "board": "esp8266:esp8266:nodemcuv2",
+    "port": "/dev/tty.usbserial-110",
+    "programmer": "AVRISP mkII",
+    "sketch": "firmware/firmware.ino",
+    "includePath": [
+        "/Users/klaute/Documents/Arduino/libraries",
+        "/Applications/Arduino.app/Contents/Java/hardware/tools/avr/avr/include",
+        "/Applications/Arduino.app/Contents/Java/hardware/tools/avr/avr/lib",
+        "/Applications/Arduino.app//Contents/Java/hardware/arduino/avr/libraries"
+        "/Applications/Arduino.app/Contents/Java/hardware/tools/avr/include",
+        "/Applications/Arduino.app/Contents/Java/hardware/tools/avr/x86_64-apple-darwin16.1.0/avr/include"
+    ]
+}

firmware/config.h

@@ -1,4 +1,6 @@
 
+#define VERSION_STR "2.0.0"
+
 #define USE_STATIC_IP //! uncomment to enable Static IP Adress
 
 #define SERIAL_BAUD_RATE 115200
@@ -7,7 +9,8 @@
 
 //#define DEVELOPMENT
 
-#define LIGHT_NAME_STR "Lumini/Lominie Pixie30/P30 light control" // default light name
+#define LIGHT_NAME "Lumini/Lominie Pixie30/P30 light control" // default light name
+#define LIGHT_NAME_DEV_POSTFIX " (DEV)"
 
 #define LIGHTS_COUNT 4 // do not modify because luminie p30 only has 4 channel, never set above 80
 
@@ -17,6 +20,10 @@
 #define EEPROM_DYNAMIC_IP_ADDRESS              3
 #define EEPROM_LAST_STATE_ADDRESS              4 // the first "last state" information for the first light
 #define EEPROM_TIMING_DATA_ADDRESS             (EEPROM_LAST_STATE_ADDRESS + LIGHTS_COUNT) // Stored data date per light ELE_USED; HH; MM; CH1; CH2; CH3; CH4; 
+#define EEPROM_IP_ADDRESS                      (EEPROM_TIMING_DATA_ADDRESS + 60) // 10 blocks of 6 byte per timing control data block = 60 byte EEPROM space
+#define EEPROM_GW_ADDRESS                      (EEPROM_IP_ADDRESS + 4) // step 4 byte further IP
+#define EEPROM_NM_ADDRESS                      (EEPROM_GW_ADDRESS + 4) // step 4 byte further GW
+#define EEPROM_DNS_ADDRESS                     (EEPROM_NM_ADDRESS + 4) // step 4 byte further NM
 
 #define BRI_MOD_STEPS_PER_SEC                 25
 

firmware/data/bottom.js

@@ -272,15 +272,23 @@ if (document.getElementById('tab-tde').classList.contains('visible')) {
 loadTCGraphData();
 }
 }, 2000);
-function updateLightState() {
-console.log('----> setting bri and power switch <----');
+function updateLightStateAndPWMValues() {
+console.log('----> setting bri, power switch, and pwm data <----');
+const promises = [];
 for (let i = 1; i <= {{LIGHT_COUNT}}; i++) {
 const lightURL = `http://{{IP_ADDRESS}}/state?light=${i}`;
-fetch(lightURL).then(response => response.json()).then(data => {
+promises.push(fetch(lightURL).then(response => response.json()));
+}
+Promise.all(promises)
+.then(dataArray => {
+for (let i = 1; i <= {{LIGHT_COUNT}}; i++) {
+const data = dataArray[i - 1];
 const briSlider = document.getElementById(`bri${i - 1}`);
 const briSliderVal = document.getElementById(`bri${i - 1}_val`);
 const onLinkOn = document.getElementById(`on${i - 1}_on`);
 const onLinkOff = document.getElementById(`on${i - 1}_off`);
+const pwmElement = document.getElementById(`light${i - 1}_pwm`);
+const pwmElementTxt = document.getElementById(`light${i - 1}_pwm_txt`);
 briSlider.value = data.bri;
 briSliderVal.innerHTML = (Math.round((data.bri * 100.0 / 255.0) * 100) / 100).toFixed(2);
 if (data.on == true) {
@@ -290,30 +298,18 @@ onLinkOff.classList.remove('pure-button-primary');
 onLinkOn.classList.remove('pure-button-primary');
 onLinkOff.classList.add('pure-button-primary');
 }
-}).catch(error => console.error(error));
-}
-}
-setInterval(updateLightState, 10000);
-updateLightState();
-function updatePWMValues() {
-console.log('----> setting pwm data <----');
-for (let i = 0; i < {{LIGHT_COUNT}}; i++) {
-const lightID = i + 1;
-const pwmElement = document.getElementById(`light${i}_pwm`);
-const pwmElementTxt = document.getElementById(`light${i}_pwm_txt`);
 if (pwmElement) {
-const url = `http://{{IP_ADDRESS}}/state?light=${lightID}`;
-fetch(url).then(response => response.json()).then(data => {
 const pwmValue = ((Math.round((data.curpwm - ((data.curpwm >= {{PWM_MIN}}) ? {{PWM_MIN}} : 0)) / {{PWM_MAX}} * 10000) / 100).toFixed(2));
 pwmElement.innerText = pwmValue.toString();
 pwmElement.value = pwmValue;
 pwmElementTxt.innerText = pwmValue.toString();
-}).catch(error => console.error(error));
 }
 }
+})
+.catch(error => console.error(error));
 }
-updatePWMValues();
-setInterval(updatePWMValues, 5000);
+updateLightStateAndPWMValues();
+setInterval(updateLightStateAndPWMValues, 5000);
 var links = document.querySelectorAll('[id^="on"][id$="_off"]');
 links.forEach(function(link) {
 link.addEventListener('click', function(event) {
@@ -354,7 +350,7 @@ console.log('Error while sending data to server.');
 }
 };
 xhr.send();
-updateLightState();
+updateLightStateAndPWMValues();
 this.classList.add('pure-button-primary');
 document.getElementById('on'+id+'_on').classList.remove('pure-button-primary');
 });
@@ -399,7 +395,7 @@ console.log('Error while sending data to server.');
 }
 };
 xhr.send();
-updateLightState();
+updateLightStateAndPWMValues();
 this.classList.add('pure-button-primary');
 document.getElementById('on'+id+'_off').classList.remove('pure-button-primary');
 });

firmware/data/config_template.html

@@ -56,15 +56,15 @@
 <input id="gwip" name="gwip" type="text" value="{{WIFI_CFG_GW}}">
 </div>
 <div class="pure-control-group">
-<label for="ip">Netmask</label>
+<label for="netmask">Netmask</label>
 <input id="netmask" name="netmas" type="text" value="{{WIFI_CFG_NM}}">
 </div>
 <div class="pure-control-group">
-<label for="ip">DNS</label>
+<label for="dns">DNS</label>
 <input id="netmask" name="dns" type="text" value="{{WIFI_CFG_DNS}}">
 </div>
 <div class="pure-controls">
-<button type="submit" class="pure-button pure-button-primary">Save</button>
+<button type="dns" class="pure-button pure-button-primary">Save</button>
 </div>
 </form>
 </div><!-- end of config div -->

firmware/data/index_template_bottom.html

@@ -18,7 +18,6 @@
 </td>
 </tr>
 </table>
-<br>
 <a href="#" id="save-button" class="pure-button pure-button-primary" onclick="sendDataToServer();">save</a>
 </div>
 </div> <!-- end of tab-tde -->
@@ -26,5 +25,6 @@
 </script>
 </div>
 </fieldset>
+<p>{{VERSION_STR}}</p>
 </body>
 </html>

firmware/data/index_template_top.html

@@ -14,7 +14,7 @@
 </head>
 <body>
 <fieldset>
-<h3>{{LIGHT_NAME}}</h3>
+<h3>{{LIGHT_NAME}}{{LIGHT_NAME_DEV_POSTFIX}}</h3>
 <div class="toast"></div>
 <div class="pure-form pure-form-aligned">
 <div class="pure-controls">

firmware/firmware.ino

@@ -13,12 +13,6 @@
 
 //********* preprocessor block *********//
 
-#ifdef DEVELOPMENT
-#define LIGHT_NAME "Dimmable Hue Light (DEV)"
-#else
-#define LIGHT_NAME LIGHT_NAME_STR
-#endif
-
 //********* Config block *********//
 
 // blue, warmwhite, purple, white&red&green
@@ -39,7 +33,7 @@ IPAddress dns        (192, 168,   0,  1);
 
 //********************************//
 
-#define LIGHT_VERSION 2.1
+#define LIGHT_VERSION 2.1 // diyHue light version
 
 #define LAST_STATE_STARTUP_LIGHT_LAST_STATE 0
 #define LAST_STATE_STARTUP_LIGHT_ON_STATE   1
@@ -103,13 +97,13 @@ void setup()
     Serial.printf("Datei Name: %s, Größe: %s\n", fileName.c_str(), formatBytes(fileSize).c_str());
   }
 
+  read_eeprom_config();
+
   if (EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS) == 0)
-  {
+  { // static ip is used
     WiFi.config(strip_ip, gateway_ip, subnet_mask, dns);
   }
 
-  read_eeprom_config();
-
   for (int j = 0; j < 200; j++)
   {
     lightEngine();
@@ -260,6 +254,49 @@ void read_eeprom_config()
     Serial.println("light[" + (String)light + "] = " + (String)light_state[light]);
   }
 
+  // read IP, NetMask, GateWay and DNS from EEPROM or store default value
+  // only IPv4 is supported
+  if (EEPROM.read(EEPROM_IP_ADDRESS) == 255)
+  {
+    for (uint8_t i = 0; i < 4; i++)
+    {
+      EEPROM.write(EEPROM_IP_ADDRESS  + i,    strip_ip[i]);
+      EEPROM.write(EEPROM_GW_ADDRESS  + i,  gateway_ip[i]);
+      EEPROM.write(EEPROM_NM_ADDRESS  + i, subnet_mask[i]);
+      EEPROM.write(EEPROM_DNS_ADDRESS + i,         dns[i]);
+    }
+  } else {
+    if (EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS) == 0)
+    {
+      for (uint8_t i = 0; i < 4; i++)
+      {
+        strip_ip[i]    = EEPROM.read(EEPROM_IP_ADDRESS  + i);
+        gateway_ip[i]  = EEPROM.read(EEPROM_GW_ADDRESS  + i);
+        subnet_mask[i] = EEPROM.read(EEPROM_NM_ADDRESS  + i);
+        dns[i]         = EEPROM.read(EEPROM_DNS_ADDRESS + i);
+      }
+      Serial.println("IP from EEPROM: " +
+                     (String)strip_ip[0] + "." +
+                     (String)strip_ip[1] + "." +
+                     (String)strip_ip[2] + "." +
+                     (String)strip_ip[3]);
+      Serial.println("GW from EEPROM: " +
+                     (String)gateway_ip[0] + "." +
+                     (String)gateway_ip[1] + "." +
+                     (String)gateway_ip[2] + "." +
+                     (String)gateway_ip[3]);
+      Serial.println("NetMask from EEPROM: " +
+                     (String)subnet_mask[0] + "." +
+                     (String)subnet_mask[1] + "." +
+                     (String)subnet_mask[2] + "." +
+                     (String)subnet_mask[3]);
+      Serial.println("DNS from EEPROM: " +
+                     (String)dns[0] + "." +
+                     (String)dns[1] + "." +
+                     (String)dns[2] + "." +
+                     (String)dns[3]);
+    }
+  }
 }
 
 //********************************//

firmware/html/bottom.js

@@ -317,15 +317,26 @@ setInterval(function() {
     }
 }, 2000);
 
-function updateLightState() {
-    console.log('----> setting bri and power switch <----');
+function updateLightStateAndPWMValues() {
+    console.log('----> setting bri, power switch, and pwm data <----');
+    const promises = [];
+
     for (let i = 1; i <= {{LIGHT_COUNT}}; i++) {
         const lightURL = `http://{{IP_ADDRESS}}/state?light=${i}`;
-        fetch(lightURL).then(response => response.json()).then(data => {
+        promises.push(fetch(lightURL).then(response => response.json()));
+    }
+
+    Promise.all(promises)
+        .then(dataArray => {
+            for (let i = 1; i <= {{LIGHT_COUNT}}; i++) {
+                const data = dataArray[i - 1];
                 const briSlider = document.getElementById(`bri${i - 1}`);
                 const briSliderVal = document.getElementById(`bri${i - 1}_val`);
                 const onLinkOn = document.getElementById(`on${i - 1}_on`);
                 const onLinkOff = document.getElementById(`on${i - 1}_off`);
+                const pwmElement = document.getElementById(`light${i - 1}_pwm`);
+                const pwmElementTxt = document.getElementById(`light${i - 1}_pwm_txt`);
+
                 briSlider.value = data.bri;
                 briSliderVal.innerHTML = (Math.round((data.bri * 100.0 / 255.0) * 100) / 100).toFixed(2);
                 if (data.on == true) {
@@ -335,32 +346,20 @@ function updateLightState() {
                     onLinkOn.classList.remove('pure-button-primary');
                     onLinkOff.classList.add('pure-button-primary');
                 }
-        }).catch(error => console.error(error));
-    }
-}
-setInterval(updateLightState, 10000);
-updateLightState();
 
-function updatePWMValues() {
-    console.log('----> setting pwm data <----');
-    for (let i = 0; i < {{LIGHT_COUNT}}; i++) {
-        const lightID = i + 1;
-        const pwmElement = document.getElementById(`light${i}_pwm`);
-        const pwmElementTxt = document.getElementById(`light${i}_pwm_txt`);
                 if (pwmElement) {
-            const url = `http://{{IP_ADDRESS}}/state?light=${lightID}`;
-            fetch(url).then(response => response.json()).then(data => {
                     const pwmValue = ((Math.round((data.curpwm - ((data.curpwm >= {{PWM_MIN}}) ? {{PWM_MIN}} : 0)) / {{PWM_MAX}} * 10000) / 100).toFixed(2));
-                //console.log('curpwm[' + i + '] = ' + data.curpwm + ' = ' + pwmValue);
                     pwmElement.innerText = pwmValue.toString();
                     pwmElement.value = pwmValue;
                     pwmElementTxt.innerText = pwmValue.toString();
-            }).catch(error => console.error(error));
                 }
             }
+        })
+        .catch(error => console.error(error));
 }
-updatePWMValues();
-setInterval(updatePWMValues, 5000);
+
+updateLightStateAndPWMValues();
+setInterval(updateLightStateAndPWMValues, 5000);
 
 // Suche nach allen Links auf der Seite mit IDs von on0_off bis on3_off
 var links = document.querySelectorAll('[id^="on"][id$="_off"]');
@@ -410,7 +409,7 @@ links.forEach(function(link) {
 
         // Sende die Anfrage im Hintergrund
         xhr.send();
-        updateLightState();
+        updateLightStateAndPWMValues();
         this.classList.add('pure-button-primary');
         document.getElementById('on'+id+'_on').classList.remove('pure-button-primary');
     });
@@ -463,7 +462,7 @@ links.forEach(function(link) {
 
         // Sende die Anfrage im Hintergrund
         xhr.send();
-        updateLightState();
+        updateLightStateAndPWMValues();
         this.classList.add('pure-button-primary');
         document.getElementById('on'+id+'_off').classList.remove('pure-button-primary');
     });

firmware/html/config_template.html

@@ -56,15 +56,15 @@
                 <input id="gwip" name="gwip" type="text" value="{{WIFI_CFG_GW}}">
             </div>
             <div class="pure-control-group">
-                <label for="ip">Netmask</label>
+                <label for="netmask">Netmask</label>
                 <input id="netmask" name="netmas" type="text" value="{{WIFI_CFG_NM}}">
             </div>
             <div class="pure-control-group">
-                <label for="ip">DNS</label>
+                <label for="dns">DNS</label>
                 <input id="netmask" name="dns" type="text" value="{{WIFI_CFG_DNS}}">
             </div>
             <div class="pure-controls">
-                <button type="submit" class="pure-button pure-button-primary">Save</button>
+                <button type="dns" class="pure-button pure-button-primary">Save</button>
             </div>
         </form>
 </div><!-- end of config div -->

firmware/html/index_template_bottom.html

@@ -19,7 +19,6 @@
                 </tr>
             </table>
             
-            <br>
             <a href="#" id="save-button" class="pure-button pure-button-primary" onclick="sendDataToServer();">save</a>
         </div>
     </div> <!-- end of tab-tde -->
@@ -29,5 +28,6 @@
 
         </div>
     </fieldset>
+    <p>{{VERSION_STR}}</p>
 </body>
 </html>

firmware/html/index_template_top.html

@@ -14,7 +14,7 @@
 </head>
 <body>
     <fieldset>
-        <h3>{{LIGHT_NAME}}</h3>
+        <h3>{{LIGHT_NAME}}{{LIGHT_NAME_DEV_POSTFIX}}</h3>
         <div class="toast"></div>
         <div class="pure-form pure-form-aligned">
             <div class="pure-controls">

firmware/timing_control.ino

@@ -23,9 +23,9 @@
 
 bool tc_testOngoing = false;
 
-uint32_t tc_last_check = 60000;
+uint32_t tc_last_check = TIME_CHECK_INTERVAL_MS; // initially check if new data needs to be read
 
-uint8_t current_target_data_block = 255;
+uint8_t current_target_data_block = 255; // no data processed yet
 
 WiFiUDP ntpUDP;
 NTPClient timeClient(ntpUDP, MY_NTP_SERVER);

firmware/webserver.ino

@@ -286,7 +286,8 @@ void init_webserver()
       }
     }
 
-    if (server.hasArg("dip")) {
+    if (server.hasArg("dip"))
+    {
       uint8_t tmp = EEPROM.read(EEPROM_DYNAMIC_IP_ADDRESS);
       uint8_t tmp2 = (server.arg("dip") == "true" ? 1 : 0);
       if (tmp != tmp2)
@@ -298,6 +299,78 @@ void init_webserver()
       }
     }
 
+    if (server.hasArg("ip"))
+    {
+      strip_ip.fromString(server.arg("ip"));
+
+      // make it persistent to eeprom
+      EEPROM.write(EEPROM_IP_ADDRESS,   strip_ip[0]);
+      EEPROM.write(EEPROM_IP_ADDRESS+1, strip_ip[1]);
+      EEPROM.write(EEPROM_IP_ADDRESS+2, strip_ip[2]);
+      EEPROM.write(EEPROM_IP_ADDRESS+3, strip_ip[3]);
+      EEPROM.commit();
+
+      Serial.println("IP set to: " +
+                     (String)EEPROM.read(EEPROM_IP_ADDRESS)   + "." +
+                     (String)EEPROM.read(EEPROM_IP_ADDRESS+1) + "." +
+                     (String)EEPROM.read(EEPROM_IP_ADDRESS+2) + "." +
+                     (String)EEPROM.read(EEPROM_IP_ADDRESS+3));
+    }
+
+    if (server.hasArg("gwip"))
+    {
+      gateway_ip.fromString(server.arg("gwip"));
+
+      // make it persistent to eeprom
+      EEPROM.write(EEPROM_GW_ADDRESS,   gateway_ip[0]);
+      EEPROM.write(EEPROM_GW_ADDRESS+1, gateway_ip[1]);
+      EEPROM.write(EEPROM_GW_ADDRESS+2, gateway_ip[2]);
+      EEPROM.write(EEPROM_GW_ADDRESS+3, gateway_ip[3]);
+      EEPROM.commit();
+
+      Serial.println("GW set to: " +
+                     (String)EEPROM.read(EEPROM_GW_ADDRESS)   + "." +
+                     (String)EEPROM.read(EEPROM_GW_ADDRESS+1) + "." +
+                     (String)EEPROM.read(EEPROM_GW_ADDRESS+2) + "." +
+                     (String)EEPROM.read(EEPROM_GW_ADDRESS+3));
+    }
+
+    if (server.hasArg("netmas"))
+    {
+      subnet_mask.fromString(server.arg("netmas"));
+
+      // make it persistent to eeprom
+      EEPROM.write(EEPROM_NM_ADDRESS,   subnet_mask[0]);
+      EEPROM.write(EEPROM_NM_ADDRESS+1, subnet_mask[1]);
+      EEPROM.write(EEPROM_NM_ADDRESS+2, subnet_mask[2]);
+      EEPROM.write(EEPROM_NM_ADDRESS+3, subnet_mask[3]);
+      EEPROM.commit();
+
+      Serial.println("NetMask set to: " +
+                     (String)EEPROM.read(EEPROM_NM_ADDRESS)   + "." +
+                     (String)EEPROM.read(EEPROM_NM_ADDRESS+1) + "." +
+                     (String)EEPROM.read(EEPROM_NM_ADDRESS+2) + "." +
+                     (String)EEPROM.read(EEPROM_NM_ADDRESS+3));
+    }
+
+    if (server.hasArg("dns"))
+    {
+      dns.fromString(server.arg("dns"));
+
+      // make it persistent to eeprom
+      EEPROM.write(EEPROM_DNS_ADDRESS,   dns[0]);
+      EEPROM.write(EEPROM_DNS_ADDRESS+1, dns[1]);
+      EEPROM.write(EEPROM_DNS_ADDRESS+2, dns[2]);
+      EEPROM.write(EEPROM_DNS_ADDRESS+3, dns[3]);
+      EEPROM.commit();
+
+      Serial.println("DNS set to: " +
+                     (String)EEPROM.read(EEPROM_DNS_ADDRESS)   + "." +
+                     (String)EEPROM.read(EEPROM_DNS_ADDRESS+1) + "." +
+                     (String)EEPROM.read(EEPROM_DNS_ADDRESS+2) + "." +
+                     (String)EEPROM.read(EEPROM_DNS_ADDRESS+3));
+    }
+
     // process the received data for every light
     for (int light = 0; light < LIGHTS_COUNT; light++)
     {
@@ -461,7 +534,13 @@ String genLightControlHTML()
 String replacePlaceholder(String http_content)
 {
 
+  http_content.replace("{{VERSION_STR}}", (String)VERSION_STR);
   http_content.replace("{{LIGHT_NAME}}", (String)LIGHT_NAME);
+#ifdef DEVELOPMENT
+  http_content.replace("{{LIGHT_NAME_DEV_POSTFIX}}", (String)LIGHT_NAME_DEV_POSTFIX);
+#else
+  http_content.replace("{{LIGHT_NAME_DEV_POSTFIX}}", (String)"&nbsp;");
+#endif
 
   http_content.replace("{{LIGHT_COUNT}}", (String)LIGHTS_COUNT);