48 lines
1.9 KiB
Markdown
48 lines
1.9 KiB
Markdown
This project is based on: https://github.com/mariusmotea/diyHue/tree/master/Lights/Arduino/Generic_Dimmable_Light
|
||
|
||
Reef2Reef forum thread: https://www.reef2reef.com/threads/for-lumini-lominie-pixie-30-p30-hers-how-to-add-ramp-up-down-and-timer-with-memory-quite-cheaply.935409/
|
||
|
||
Most of the code was generated by ChatGPT and adapted by myself.
|
||
|
||
The controller I use is a old NodeMCU v1.0, which is connected to 4x D4184 MOS breakout boards. See NodeMCU pins table beyond.
|
||
The cable I use is a https://amzn.eu/d/0jigRCh. I cut it in half and attached it to the MOS boards.
|
||
|
||
The NodeMCU‘s power supply is a 7805, it‘s output is connected to the Vin pin of the NodeMCU.
|
||
The input of the 7805 is connected to the 24V of the DC power plug.
|
||
|
||
NodeMCU pin connections to the cable wires:
|
||
|
||
| |ch1|ch2|ch3|ch4|
|
||
|--|--|--|--|--|
|
||
|LED color|blue|warm white|purple|white & red & green|
|
||
|Wire color|blue|black|red|white|
|
||
|Arduino pin names|D1|D2|D7|D5|
|
||
|GPIO|5|4|13|14|
|
||
|
||
The HTML content is pushed to the NodeMCU separetely by using the ESP8266 Sketch Data Upload plugin of the old Arduino IDE (not "Arduino IDE").
|
||
|
||
After the firmware is written the first time to the NodeMCU.
|
||
|
||
In case there is no data folder available in the firmware folder create it.
|
||
Open a unix style commandline with a bash and step unto the data folder. Run the script
|
||
|
||
$ bash ../../tools/html_gen_files.sh
|
||
|
||
This generates all of the required files and places them into the data folder.
|
||
|
||
The EEPROM's default values are set to default.
|
||
All except of the timing control data block.
|
||
|
||
You have to click at the link "reset timing control data" on the webinterface.
|
||
|
||
The IP address is set to dynamic (DHCP) after initial flash of the NodeMCU.
|
||
|
||
Sample schematics (no NodeMCU pins defined in there)
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|