Added som debug messages

This commit is contained in:
klaute 2017-12-09 18:08:37 +01:00
parent 8a4f73d425
commit 0652515727
3 changed files with 36 additions and 10 deletions

11
firmware/config.h Normal file → Executable file
View file

@ -11,10 +11,19 @@
#define STATUS_LED_PIN BUILTIN_LED
#define ANEMOMETER_PIN D4
#define BME_SCK 13
#define BME_MISO 12
#define BME_MOSI 11
#define BME_CS 10
#define SEALEVELPRESSURE_HPA (1013.25)
#define BME280_ADDRESS 0x76
const char *INFLUXDB_HOST = "influxdb.okoyono.de";
const uint16_t INFLUXDB_PORT = 80;
const char *INFLUXDB_DB = "weatherstation";
const char *INFLUXDB_USER = "oko";
const char *INFLUXDB_PASS = "de1873a0d2f8f21f17cf4d8db4f65c59";
String DEVICE_NAME = "aaron";
String DEVICE_NAME = "aaron";

28
firmware/firmware.ino Normal file → Executable file
View file

@ -3,7 +3,7 @@
#include <DNSServer.h>
#include <ESP8266WebServer.h>
#include <WiFiManager.h>
#include <ESP8266Influxdb.h>
#include <ESP8266Influxdb.h> // https://github.com/hwwong/ESP8266Influxdb auchecken und code+header in das firmware verzeichnis kopieren
#include <Adafruit_Sensor.h> // Adafruit Unified Sensor
#include <Adafruit_APDS9960.h> // https://github.com/adafruit/Adafruit_APDS9960
#include <Adafruit_BME280.h> // https://github.com/adafruit/Adafruit_BME280_Library
@ -59,30 +59,44 @@ void setup() {
// Open the InfluxDB session
influxdb.opendb(INFLUXDB_DB, INFLUXDB_USER, INFLUXDB_PASS);
delay(2000);
// Initialize and configure the sensors
apds.begin();
apds.enableColor(true);
bme.begin();
bool status = bme.begin(0x76);
if (!status) {
Serial.println("Could not find a valid BME280 sensor, check wiring!");
while (1);
}
delay(100);
}
void loop() {
digitalWrite(STATUS_LED_PIN, LOW);
#ifdef DEBUG
Serial.println("---");
digitalWrite(STATUS_LED_PIN, HIGH);
#endif
currentSensorData[SENSOR_TEMPERATURE] = fetchTemperature();
Serial.print("*");
currentSensorData[SENSOR_HUMIDITY] = fetchHumidity();
currentSensorData[SENSOR_LIGHT] = fetchLight();
Serial.print("*");
//currentSensorData[SENSOR_LIGHT] = fetchLight();
Serial.print("*");
currentSensorData[SENSOR_WINDSPEED] = fetchWindspeed();
Serial.print("*");
currentSensorData[SENSOR_PRESSURE] = fetchPressure();
Serial.println("*");
#ifdef DEBUG
Serial.println("");
Serial.println("Current readings:");
Serial.println("Temperature: " + String(currentSensorData[SENSOR_TEMPERATURE]) + " °C");
Serial.println("Humidity: " + String(currentSensorData[SENSOR_HUMIDITY]) + "%");
Serial.println("Humidity: " + String(currentSensorData[SENSOR_HUMIDITY]) + " %");
Serial.println("Light: " + String(currentSensorData[SENSOR_LIGHT]) + " Lumen");
Serial.println("Windspeed: " + String(currentSensorData[SENSOR_WINDSPEED]) + " Km/h");
Serial.println("Pressure: " + String(currentSensorData[SENSOR_PRESSURE]) + " hPa");
@ -91,4 +105,4 @@ void loop() {
pushToInfluxDB(DEVICE_NAME, currentSensorData);
delay(UPDATE_INTERVAL*1000);
}
}

7
firmware/influxdb.ino Normal file → Executable file
View file

@ -3,5 +3,8 @@ void pushToInfluxDB(String device, float sensorValues[]) {
influxdb.write("weather,device=" + device + " humidity=" + String(sensorValues[SENSOR_HUMIDITY]));
influxdb.write("weather,device=" + device + " light=" + String(sensorValues[SENSOR_LIGHT]));
influxdb.write("weather,device=" + device + " windspeed=" + String(sensorValues[SENSOR_WINDSPEED]));
influxdb.write("weather,device=" + device + " pressure=" + String(sensorValues[SENSOR_PRESSURE]));
}
int tmp = influxdb.write("weather,device=" + device + " pressure=" + String(sensorValues[SENSOR_PRESSURE]));
Serial.println("Opendb status: " + String(tmp));
}