klaute
35e1234798
Added battery pin configuration
2020-02-20 19:49:44 +01:00
klaute
f9ee9740ae
Fixed apds9960 read call.
2020-02-18 20:06:03 +01:00
Florian Eitel
d383677b80
Add README.md file to firmware
2019-08-04 13:21:17 +02:00
Florian Eitel
01d6737d60
Use NaN to signal no sensor values
...
The InfluxDB client will filter NaNs
2019-08-04 13:21:16 +02:00
Florian Eitel
007d2e4e73
Refactor webUpdater to remove logic from firmware.ino
2019-08-04 13:21:15 +02:00
Florian Eitel
ed913d740e
Make influxdb and serial feature configurable
2019-08-04 13:21:14 +02:00
Florian Eitel
be334245ff
Refactor sensor interface with extra files and function pointer
...
That makes it easier to enable/disable sensors.
Also added support for APDS9930
2019-08-04 12:53:20 +02:00
Florian Eitel
abcfcd276c
Remove unused Adafruit_Sensor import
...
Would be nice if all sensors are supported by the common sensor
interfacce - but right now both are not supported. Unfortunately BME280
still depend on it, even when it's not used :(
2019-08-04 12:27:41 +02:00
Florian Eitel
2f9bae5622
Refactor ifdef's to be less verbose and better to read
2019-08-04 12:27:40 +02:00
Florian Eitel
f4139b27c8
Update firmware libraries
2019-08-04 12:27:37 +02:00
92908452fc
„firmware/config_user.h.example“ ändern
2019-03-31 18:48:37 +00:00
449654c250
working without light sensor
2019-03-31 17:01:04 +02:00
b0ec86890d
Fixing ifdef logic
2019-03-31 16:17:57 +02:00
klaute
c2f1571305
Charge / charging test modified.
2019-02-09 09:52:49 +01:00
klaute
808cf6a40d
Nodemcu board support added.
2019-02-06 21:26:13 +01:00
11c991e687
Add some hints to reset the credentials. Fixes #16
2019-02-03 21:14:18 +01:00
44e9b02cf1
latest version
2019-02-03 19:13:33 +01:00
bd95532bc4
Fix a lot of compiler warnings (#MDST)
2019-02-03 19:10:38 +01:00
f24858d162
Move all dependencies to the repository
...
This step seems bold, but is saves us so much hassle. Even better, we have a
reliable codebase, with all the dependencies (and their versions) we
need in order to build the project. If a library got an update, we can
replace it inplace if the code is still compatible.
2019-02-03 16:15:00 +01:00
klaute
091ab25196
Fixed typo
2019-02-03 15:09:01 +01:00
klaute
b4284ccb3c
Added user specific humidity/light calculation factor constants.
2019-02-03 14:53:08 +01:00
klaute
589be0474f
Logic fixed for charging/charged pin
2019-02-02 15:21:03 +01:00
1ea0ea410d
Fix limititing number of retries
2019-02-02 14:59:00 +01:00
klaute
e869f03c2c
Some more constants.
2019-02-02 14:01:13 +01:00
klaute
29c52d0a34
Fixed influxdb write
2019-02-02 13:58:47 +01:00
klaute
2bdc615ddb
Some logic fixes
2019-02-02 13:31:21 +01:00
klaute
ef2a6c15de
Timeout constant values are used now.
2019-02-02 11:58:44 +01:00
klaute
740bfc600b
Battery charging states added.
2019-02-02 11:15:27 +01:00
klaute
87fe6c6e7a
Added battery charging states.
2019-02-02 10:09:00 +01:00
f0974e6e79
Update 'firmware/sensors.ino'
...
Comments comments comments
2019-01-28 10:54:16 +00:00
klaute
b5a7b36869
user config example updated
2019-01-27 20:31:15 +01:00
klaute
96894fbc39
Fixed compilation errors... config_user.h includes twice.
2019-01-27 20:14:43 +01:00
1cef0e43c8
Clean up power settings logic
2019-01-27 18:49:28 +01:00
07ed99f9a2
Pushing only valid values
2019-01-27 16:29:58 +01:00
d9256c2194
Remove humidity * 2
2019-01-08 22:41:48 +01:00
169bd36c3d
Allow user specific modifications
2019-01-08 22:41:24 +01:00
klaute
ec349aec13
disabled debugging
2019-01-08 21:07:56 +01:00
klaute
7bb62b5e4e
Fixed anemometer read and humidity value.
2019-01-08 21:07:16 +01:00
c1b19add3b
Update 'firmware/firmware.ino'
...
Removed variable check which is always true.
2019-01-06 17:13:37 +00:00
klaute
dd7054d853
Fix for 03962a board
2019-01-06 15:24:02 +01:00
klaute
a95f5c648e
Fix for 03962a board
2019-01-06 15:23:48 +01:00
klaute
53c6bbcb6c
Fix for 03962 board
2019-01-06 15:21:59 +01:00
klaute
5ebbd6377c
Fix for 03962 board
2019-01-06 15:21:03 +01:00
klaute
845e637c59
manual merge
2019-01-05 18:58:01 +01:00
82e450708a
More energy saving features
2018-12-02 17:06:06 +01:00
klaute
7be4fe23ab
HT stopfen modifies. Some improvements in the firmare.
2018-08-05 09:50:46 +02:00
klaute
e3327a54e9
influxdb ip replaced by hostname.
2018-07-19 21:56:43 +02:00
klaute
d744fffeb0
InfluxDB hostname replaced by IP v4 address. Added a config setup portal timeout.
2018-07-19 20:13:08 +02:00
klaute
a8c40a7e23
Minimum voltage check moved into a separate function. Minimum voltage constant added.
2018-07-13 20:20:56 +02:00
984dfc07dd
Update 'firmware/firmware.ino'
...
Added undervoltage preventing deep sleep to setup function.
2018-07-13 08:21:59 +00:00
e3a9ecc595
Update 'firmware/firmware.ino'
...
Moved the deep sleep call in case of low battery to the top of the main loop.
2018-07-13 08:02:50 +00:00
klaute
1da7da3b64
Changed the measurement interval to 10 minutes.
2018-07-12 22:34:01 +02:00
klaute
10977e14b7
Powersaving implemented. The web update mechanism is disabled.
2018-07-12 22:30:30 +02:00
klaute
f52e7afc87
Added a reload interval to the main html page.
2018-07-11 12:09:29 +02:00
klaute
cee44bee6b
Fixed the main html page.
2018-07-11 11:55:58 +02:00
klaute
9dd90841a5
Frickelt in a sensor status page.
2018-07-11 11:49:58 +02:00
klaute
c16d431c89
Added the battery voltage code.
2018-07-11 11:12:53 +02:00
5cdaf48d36
Set connection timeout
2018-06-27 19:43:34 +02:00
klaute
c47116af89
Main loop timing optimized.
2018-06-24 16:54:57 +02:00
klaute
0e33d52af4
Comment added: delay of 100ms added to the energy saver dummy code.
2018-06-24 16:01:05 +02:00
klaute
b2d513dcde
The update mechanism is now always enabled.
2018-06-24 15:53:58 +02:00
klaute
cf162c9dce
WebUpdater documentation updated.
2018-06-24 12:13:46 +02:00
klaute
5fa712a0cd
WebUpdater documentation updated.
2018-06-24 12:03:05 +02:00
klaute
2a5097b9fd
WebUpdater documentation updated.
2018-06-24 12:01:58 +02:00
klaute
f33a9f098e
Working implementation of the OTA (webbased).
2018-06-24 12:00:51 +02:00
klaute
b03df134c5
Added the webbased OTA update mechanism.
2018-06-23 21:49:11 +02:00
klaute
107d9544c0
Dropped the code of the man in the moon.
2018-06-23 20:14:45 +02:00
klaute
60561224d4
First fully working implementation. But the measured wind speed has to be verified. Added some links for documentation.
2018-06-23 20:13:33 +02:00
d5aee1ca54
Change firmware to use D7 instead of D4 for anemometer
2017-12-30 20:06:18 +01:00
klaute
284e3940ea
Bugfix array size
2017-12-09 19:10:31 +01:00
klaute
f7c1d4dee9
Revert "Broken newline removed."
...
This reverts commit 2fefed97e5
2017-12-09 18:33:43 +01:00
klaute
814d00f24d
Broken newline removed.
2017-12-09 18:26:12 +01:00
klaute
2fefed97e5
Broken newline removed.
2017-12-09 18:25:54 +01:00
klaute
0652515727
Added som debug messages
2017-12-09 18:08:37 +01:00
729d2b8650
Der stand geht
2017-12-09 18:07:46 +01:00
11c8c9a587
Add the sensor readings #1
2017-11-20 20:42:02 +01:00
f6d8abc723
Add influxdb and push the sensor data to the database
2017-11-20 20:15:42 +01:00
dd0e2b2e40
Update 'firmware/firmware.ino'
2017-11-17 16:57:09 +01:00
c9fd2ad2ac
Add reliable wifi connection #2 #3
2017-11-12 22:34:08 +01:00
f5042a3ec4
Implement the anemometer sensor
2017-11-12 21:37:55 +01:00
def78c8f92
Add come notes
2017-11-07 22:36:18 +01:00
4c174fda5e
Lets start ...
2017-11-07 22:20:14 +01:00
da2ee9acab
Initial setup. Add some datasheets
2017-10-20 00:13:40 +02:00
