92 lines
4.4 KiB
Markdown
Executable file
92 lines
4.4 KiB
Markdown
Executable file
APDS9930 Ambient Light and Proximity sensor
|
|
===========================================
|
|
|
|
This is a fork of the [library from Sparkfun for the APDS-9960 sensor](https://github.com/sparkfun/APDS-9960_RGB_and_Gesture_Sensor). It has been adapted to read values from this other model.
|
|
|
|
[**Quick-start guide available here**](https://web.archive.org/web/20151224052223/http://davideddu.org/blog/posts/apds-9930-arduino-quickstart/)
|
|
|
|
[**Purchase an Avago APDS-9930 Breakout Board here**](http://www.dx.com/p/384037?Utm_rid=14976370&Utm_source=affiliate)
|
|
|
|
|
|
# DO NOT EMAIL ME IF YOU HAVE AN ISSUE
|
|
It will be deleted without reading. If you have an issue, [create an issue](https://github.com/Depau/APDS9930/issues) here on GitHub.
|
|
|
|
# Unmaintained
|
|
I'm not going to maintain this library any more. I will merge pull requests, though. Contributions are welcome. Just don't expect anything from me.
|
|
|
|
|
|
|
|
**Note:** even though it says APDS-9960, it's an APDS-9930. That's how I ended up getting one of those. I wanted the RGB sensor. I found this crap in my mailbox. But I decided to write a library for it anyways ;)
|
|
|
|
Getting Started
|
|
---------------
|
|
|
|
* Download the Git repository as a ZIP ("Download ZIP" button)
|
|
* Unzip
|
|
* Copy the entire library directory (APDS-9930) to
|
|
\<Arduino installation directory\>/libraries
|
|
* Open the Arduino program
|
|
* Select File -> Examples -> APDS9930 -> GestureTest
|
|
* Plug in your Arduino and APDS-9930 with the following connections
|
|
|
|
*-OR-*
|
|
|
|
* Use the library manager
|
|
|
|
| Arduino Pin | APDS-9930 Board | Function |
|
|
|---|---|---|
|
|
| 3.3V | VCC | Power |
|
|
| GND | GND | Ground |
|
|
| A4 | SDA | I²C Data |
|
|
| A5 | SCL | I²C Clock |
|
|
| 2 | INT | Interrupt |
|
|
|
|
*P.S.: you already know you can't use this purple little thing with your 5V Arduino without a level shifter, right? :) In case you don't have a level shifter, you can detach the microcontroller from an Arduino Uno, reconnect the oscillator pins, the RX and TX pins, the reset and the LED/SCK pins back to the board with some jumper wires. You can then power the microcontroller from a 3.3V source (the 3V3 output on the board should work) and connect the sensor directly to the MCU. Look up "Arduino on Breadboard".*
|
|
|
|
* Go to Tools -> Board and select your Arduino board
|
|
* Go to Tools -> Serial Port and select the COM port of your Arduino board
|
|
* Click "Upload"
|
|
* Go to Tools -> Serial Monitor
|
|
* Ensure the baud rate is set at 9600 baud
|
|
* Swipe your hand over the sensor in various directions!
|
|
|
|
Repository Contents
|
|
-------------------
|
|
|
|
* **/examples** - Example sketches for the library (.ino). Run these from the Arduino IDE.
|
|
* **/extras** - Additional documentation for the user. These files are ignored by the IDE.
|
|
* **/src** - Source files for the library (.cpp, .h).
|
|
* **keywords.txt** - Keywords from this library that will be highlighted in the Arduino IDE.
|
|
* **library.properties** - General library properties for the Arduino package manager.
|
|
|
|
Documentation
|
|
--------------
|
|
|
|
* **[Quickstart Guide](https://web.archive.org/web/20151224052223/http://davideddu.org/blog/posts/apds-9930-arduino-quickstart/)** - Basic hookup guide for the sensor.
|
|
* **[Product Repository](https://github.com/Davideddu/APDS9930)** - Main repository (including hardware files) for the APDS9930 ambient light and proximity sensor.
|
|
* **[Installing an Arduino Library Guide](https://learn.sparkfun.com/tutorials/installing-an-arduino-library)** - Basic information on how to install an Arduino library.
|
|
|
|
|
|
Version History
|
|
---------------
|
|
* master - Adapted for use with APDS-9930
|
|
* [V_1.4.0](https://github.com/sparkfun/APDS-9960_RGB_and_Gesture_Sensor_Arduino_Library/tree/V_1.4.0) - Updated to new library structure
|
|
* V_1.3.0 - Implemented disableProximitySensor(). Thanks to jmg5150 for catching that!
|
|
* V_1.2.0 - Added pinMode line to GestureTest demo to fix interrupt bug with some Arduinos
|
|
* V_1.1.0 - Updated GestureTest demo to not freeze with fast swipes
|
|
* V_1.0.0: Initial release
|
|
* Ambient and RGB light sensing implemented
|
|
* Ambient light interrupts working
|
|
* Proximity sensing implemented
|
|
* Proximity interrupts working
|
|
|
|
License Information
|
|
-------------------
|
|
|
|
This product is _**open source**_!
|
|
|
|
Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.
|
|
|
|
Distributed as-is; no warranty is given.
|
|
|
|
- Your friends at SparkFun. And Davide Depau :*
|